Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Windows & Doors: The San Francisco Owner’s Guide
We install and service ES Windows-compatible windows and doors across San Francisco, and most full window replacements run $5,310 to $17,700 installed, with impact-rated units at $9,440 to $29,500. When a window or door fails, it usually shows up the same way: a sash that won’t seal tight, fog between the panes, or a door that drags on the sill when the fog rolls in off the Pacific. If your ES Windows product is doing any of that, you’re in the right place.
Which ES Windows Models This Applies To
ES Windows covers a range of vinyl and aluminum product lines, and the part you need depends on which one sits in your wall. The label is your first stop. Pull the sash open and look at the top or side jamb for a manufacturer sticker with a series number and a glass date; if it’s faded or gone, measure the visible glass and the frame opening to the nearest 1/16 inch, because a fit that’s off by an eighth won’t seal in San Francisco’s wind.
Here’s the compatibility gotcha most owners miss: ES Windows changed glazing bead profiles across production years, so a replacement sash from one run won’t always seat in a frame from another. Match the series before you buy anything.
On the OEM-versus-aftermarket call, we source factory parts when the model is still supported and use quality aftermarket equivalents when it isn’t, since the aftermarket has caught up on most standard operators, balances, and weatherstrip. We also service KraftMaid, Cambria, and Silestone products, so if a single service call covers more of your home, we handle it. We’re an independent service provider, not affiliated with ES Windows.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Windows & Doors Is Failing
- Fog or condensation trapped between the panes. The insulated glass seal has failed and moisture is getting in. Once that happens the glass unit is done, no drying it out.
- A sash that sticks, sags, or won’t stay up. Worn balances or a warped frame are the usual cause. In San Francisco’s damp coastal air, vinyl and weatherstrip age faster than they do inland.
- A door that drags on the sill or leaks at the threshold. A dropped hinge, worn sweep, or settled frame. This is the one owners notice first when the rain comes in sideways.
- Drafts and cold spots near the frame. Failed weatherstrip or a seal that’s pulled away, which lets the evening fog chill straight through.
- Water staining or soft wood at the sill. The flashing or seal has been leaking for a while. Left alone, it reaches the framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Francisco, window replacement runs $5,310 to $17,700 installed, and impact-rated installation runs $9,440 to $29,500. A single failed glass unit or hardware swap costs less than a whole-window job because you’re paying for the part and the labor, not the frame.
What drives the range: the number of units, the glazing you choose, the series, and whether the opening needs any reframing. Our upfront pricing means the number you see is the number you pay, with no change orders halfway through. Every job is covered by the 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction. Our technicians have up to 12 years of experience, and we pull permits and pass inspections where the work requires it.
DIY or Call Us?
You can safely check a few things yourself: read the model label, measure the glass and frame, test the sash by hand, and look for fog between the panes. Those tell you what’s wrong without touching anything risky.
Where DIY goes wrong is at the glass and the door hardware. Dropping in an insulated glass unit means handling a fragile, heavy pane and getting the seal and setting blocks exactly right, or it fogs again within a couple of seasons. Door adjustments involve hinge and sill geometry that’s easy to throw out of square. A bad seal on a San Francisco home means water intrusion during the first real storm, and that repair costs more than the original fix. For anything past a visual check, call us at (866) 320-2646 and we’ll tell you straight whether it’s a part swap or a full unit.
FAQs
Expect 15 to 25 years for the frame and hardware, but the insulated glass seal often fails sooner in coastal humidity, sometimes within 10 to 15 years. Salt air and fog speed up weatherstrip wear, so inspect it yearly. Call (866) 320-2646 for an exact quote on a replacement, free.
Often yes. A fogged glass unit, a worn balance, or a bad sweep can be swapped without replacing the whole window. If the frame is warped or the sill is rotted, full replacement makes more sense. We’ll give you the honest call either way.
A single glass unit or hardware fix is typically a few hours in one visit, and a full multi-unit window replacement usually runs one to two days. We’ll confirm the schedule before we start, and the price won’t move once work begins. Call (866) 320-2646 for your free estimate.
We identify your series from the jamb label or measurements, then source the matching factory part or a quality aftermarket equivalent. You get a written line-item quote on the part and labor before we order anything. Call (866) 320-2646 to get started.
Ready to sort out your ES Windows product? Call Groundwork Construction Co. of San Francisco at (866) 320-2646 to schedule your free estimate. Calls are answered by a live person, 24/7, and we offer $1,000 off projects over $10,000 plus 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.