Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Driveway & Pavers: The San Francisco Owner’s Guide
We install GAF-compatible driveway and paver systems in San Francisco, and most full replacements run $8,260 – $21,240 for pavers or $5,310 – $14,160 for concrete, depending on square footage, base prep and access. Repairs and resealing sit far lower, at $295 – $825 for sealing. Most projects get scheduled within days of an approved estimate, and we walk the site first so nothing surprises you later.
Owners usually find out something’s wrong the same way. A paver lifts after a heavy rain and water pools where it shouldn’t. A driveway edge crumbles a little more each winter. Or the surface that looked fine in September is cracked and shifting by February. In San Francisco, that discovery almost always traces back to drainage and base, not the pavers themselves. Fog belt moisture, clay soils in neighborhoods like the Sunset and Richmond, and hillside runoff do more damage here than sun or traffic ever will.
Which GAF Models This Applies To
GAF’s driveway and paver line pairs their surface products with the base and edge restraint systems that hold them in place, and the part that fails is rarely the paver face. It’s usually the base layer, the joint sand, or the edge restraint. Those three components are what we match to your existing GAF installation.
To identify what you have, start with the install paperwork or the original contractor’s spec sheet, which lists the GAF product series and base depth. If that’s gone, measure the paver thickness and note the color and texture. GAF compatible pavers typically run in standard thicknesses, and a mismatch of even a quarter inch throws off the joint lines and the restraint fit. Bring a single loose paver to your estimate if you can pull one safely.
On the OEM-versus-aftermarket question: for base aggregate and joint sand, a quality equivalent performs the same as the GAF-specified material as long as the gradation and compaction match. For edge restraint and any interlocking clips, we recommend staying with the manufacturer-matched component, because a generic restraint that’s slightly off won’t hold the field under frost heave or heavy runoff. We’re an independent contractor, not affiliated with GAF, so we quote both options and tell you which one actually matters for your install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Driveway & Pavers Is Failing
Here’s what a failing GAF driveway or paver system looks like before it becomes a full replacement.
- Ponding water after rain. Water sitting in low spots for more than a day means the base has settled or the slope is off. In San Francisco, this is the first and most reliable warning sign, because our winter rain finds every low point.
- Loose or rocking pavers. A paver that shifts underfoot has lost its bedding sand or the base beneath it has compacted unevenly. Left alone, the movement spreads to neighboring pavers within a season.
- Sand washing out of the joints. Joint sand is the system’s locking mechanism. When it erodes, pavers lose interlock, edges chip, and weeds move in. Heavy runoff on a sloped San Francisco lot accelerates this faster than flat-ground installs.
- Crumbling or separated edge restraint. The edge holds the whole field together. A restraint that’s pulled away or cracked lets the outer course spread, and once the edge goes, the field follows.
- Efflorescence and surface staining that won’t scrub out. White mineral bloom or persistent dark patches usually point to moisture trapped in the base. Clean it and it returns, which tells you the problem is underneath, not on top.
One caveat on concrete driveways: spider cracks and hairline shrinkage cracks are normal and cosmetic. Cracks wider than a quarter inch, or any crack that’s spreading, means the slab is moving and needs a look.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in San Francisco depends on square footage, base condition, access, and whether we’re matching an existing GAF system or starting fresh. Here’s what our estimates look like.
- Paver driveway installation: $8,260 – $21,240
- Concrete driveway installation: $5,310 – $14,160
- Asphalt driveway paving: $4,130 – $10,620
- Driveway replacement (full tear-out and rebuild): $5,900 – $16,520
- Driveway sealing: $295 – $825
- Paver patio installation: $4,130 – $12,980
What drives the range: total square footage, how deep we have to go on base excavation, whether existing material needs hauling off, and slope. A steep San Francisco driveway on a hillside lot costs more to build because the base and drainage work is more involved, and that’s a real line item, not padding.
We quote parts and labor as separate lines so you can see what the components cost. Every driveway and paver project carries our 730-Day Done Right Promise: if it isn’t done right, we make it right. Upfront pricing means the number you see is the number you pay, and 0% financing for 18 months is available, plus $1,000 off projects over $10,000.
DIY or Call Us?
Some checks are safe and worth doing yourself. Walk the driveway after rain and note where water pools. Look at the edge restraint and see if it’s pulled away from the pavers. Sweep a little joint sand back in if a few joints have opened up, and pull a weed or two. Resealing a small, flat, healthy driveway is also within reach for a careful homeowner.
Where DIY goes wrong: base repair, re-sloping, and edge restraint replacement. Those look simple and aren’t. Getting the base depth, compaction, and drainage right is what makes a driveway last in San Francisco’s wet winters, and a DIY rebuild that misses the drainage will fail in one or two seasons. On steep lots, it’s also a genuine safety issue: heavy pavers, unstable slopes, and excavation near retaining walls are where homeowners get hurt. This work needs a trained crew and proper compaction equipment.
If we’re honest, most of what fails on a GAF driveway in San Francisco is underneath the surface, and that’s the part you can’t safely check from a kneeling position. Call (866) 320-2646 and we’ll schedule a free estimate, put the parts and labor on paper, and tell you straight whether you’re looking at a seal, a repair, or a rebuild.
FAQs
A properly installed GAF paver driveway should hold up 25 to 30 years in San Francisco’s climate; concrete often runs 20 to 30 years with good base and drainage. The pavers themselves rarely fail first. The base, joint sand, and edge restraint are what shorten lifespan, which is why drainage matters more here than in drier markets. Call (866) 320-2646 for a free estimate on a repair or replacement.
Often, yes. Localized settling, a few loose pavers, washed-out joints, or a separated edge can usually be repaired by resetting the affected area and restoring the base and restraint, which costs a fraction of a full replacement. If the base has failed across most of the driveway, or water is pooling in multiple spots, replacement is the more durable answer. We tell you which one you’re looking at during the free estimate.
Most single-driveway replacements in San Francisco take a few days to about a week, depending on square footage, base excavation, and weather. Tear-out and base prep is the bulk of the time; laying pavers goes quickly once the base is right. We give you a schedule in the written estimate and don’t leave you guessing.
We start with your existing product series or the paver measurements, then match base aggregate, joint sand, and edge restraint to that spec. For base and sand, a quality equivalent works as long as the gradation and compaction match; for edge restraint and interlocking components, we stay manufacturer-matched. We’re not affiliated with GAF, so we quote both OEM and equivalent options and tell you which one matters for your project. We also service KraftMaid, Cambria, and Silestone for homeowners working through a broader home improvement plan. Call (866) 320-2646 for a free estimate, upfront pricing, and 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.