Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Windows & Doors: The San Francisco Owner’s Guide
We supply and install GAF-compatible windows and doors for San Francisco homes, with most full window replacements landing between $5,310 and $17,700 installed, and impact-rated units running $9,440 to $29,500. We quote each job on-site because fog-belt exposure in the Sunset and wind-driven rain on Twin Peaks change the spec, not just the size. Most owners discover a failing unit the same way: a draft they can’t trace, condensation trapped between panes, or a door that suddenly won’t latch square in its frame. In San Francisco’s salt air and marine layer, those symptoms usually point to seal failure or hardware corrosion long before the glass itself gives out.
Which GAF Models This Applies To
GAF is best known for roofing, and its window and door offerings span several series with different frame profiles and glazing packages. Matching the right unit starts with the label on the frame’s inner edge, which carries the series, the glass code, and often a date stamp. Photograph it before you call anyone. The other half of the match is rough opening measurement: width, height, and jamb depth, taken in three places each because San Francisco’s older stock housing rarely has square openings, especially in pre-1940 buildings in the Mission and Noe Valley.
The OEM-versus-aftermarket call depends on age. If your unit is still under its glass warranty, staying with the original series protects that coverage. Once it’s out of warranty, a quality aftermarket unit matched to the same rough opening often costs less and performs the same, provided the glazing and frame material suit your exposure. We’re an independent service provider, not affiliated with GAF, so we’ll tell you plainly when an exact match makes sense and when it doesn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Windows & Doors Is Failing
- Fogging or condensation between the panes. The seal on the insulated glass unit has failed and moisture is trapped inside. Once that happens, the unit can’t be dried out and the insulating value drops steadily.
- Drafts you can feel on a still day. Worn weatherstripping or a failed sweep, made worse by frames that have shifted as a hillside home settles. In San Francisco, a draft on a calm morning almost always means seal or hardware, not wind.
- A door that sticks, then swings free. Hinge screws pulling from aged wood or a frame out of square. Left alone, a heavy entry door can drop and stop latching entirely.
- Pitting or white powder on hardware. Salt-laden air off the Pacific corrodes cheap plated hardware fast. Stainless or better finishes hold up where standard plating fails within a few seasons.
- Visible water staining at the sill or jamb. Failed flashing or caulk letting water past the frame. This one needs attention quickly because it can reach framing and interior wallboard.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for San Francisco, with parts and labor broken out upfront:
- Window replacement: $5,310 to $17,700
- Impact window installation: $9,440 to $29,500
The range is driven by unit count, glass package, frame material, and how much carpentry the opening needs. A straight swap in a square opening sits at the low end. A hillside home with out-of-square openings, or a historic-district building with exterior trim requirements, moves toward the top. Our quotes are line-item: units, hardware, flashing, trim, labor, and disposal listed separately. The number you see is the number you pay, and every install is covered by the 730-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself: photograph the frame label, measure the rough opening, test the latch and hinge screws, and look for daylight around the edges. What goes wrong with DIY on this work isn’t the trim. It’s the flashing and the setting of the unit. A window or door that goes in without proper sill pan and flashing lets water in behind the frame, and that damage shows up a season later inside the wall. We also do this work at height on multi-story San Francisco homes, and ladder work on a Victorian facade is a genuine fall risk. Call (866) 320-2646 for a free estimate and we’ll spec the right unit for your exposure.
FAQs
A well-installed unit should serve 20 to 30 years, but in San Francisco’s marine environment expect the seal on the insulated glass and the exterior hardware to be the first things to go, often around year 10 to 15. The glass itself usually outlasts both. Regular caulk checks and clean hardware stretch the life considerably. Call (866) 320-2646 if yours are past that mark and fogging.
Sometimes. A single failed pane, a bad hinge, or worn weatherstripping can often be addressed without a full swap. Fogging between sealed panes usually means replacing the insulated glass unit, not the whole window. We’ll tell you straight which side of that line your window falls on. Estimates are free.
A single window or door typically goes in within a few hours, and most whole-home jobs we complete in a single visit depending on count and trim work. You’ll have a firm timeline in writing before we start. Call (866) 320-2646 to schedule a free estimate.
We match the unit to your existing GAF series using the frame label and rough opening measurements, then order through our verified brand partners. That means the correct spec the first time rather than a return-and-refit cycle. Questions on a specific unit? Call (866) 320-2646 and we’ll walk through it.
We also work with KraftMaid, Cambria, and Silestone on interior projects across San Francisco. Windows and doors are one piece of what we do, and we handle them from foundation to finish line. Call (866) 320-2646 today for your free estimate and design consult. We answer with a live person, 24/7, and every project over $10,000 comes with $1,000 off plus 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.