Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Fence Installation: The San Francisco Owner’s Guide
We install and repair IKO fence systems across San Francisco, with most installed fence projects landing between $4,130 and $10,620 depending on run length, height, and gate count. We don’t stock parts and we don’t carry them on a truck – we source the exact IKO-compatible components your fence needs and install them in one scheduled visit. Most owners find out something’s wrong the same way: a gate that drags on the ground after a foggy stretch, a post that wobbles near the base, or a section that leans after a wind event off the Pacific. In San Francisco, that combination of salt air and marine moisture is what drives most of the fence calls we get. Groundwork Construction Co. of San Francisco is an independent service provider and isn’t affiliated with IKO.
Which IKO Models This Applies To
IKO fence systems show up in San Francisco in a range of configurations, and matching the right replacement section starts with identifying what’s already on your property. Look for the manufacturer stamp on the back of a picket or the cap on a post – it usually carries the profile name and a production code. Measure post spacing center-to-center (common runs are 6-foot or 8-foot on-center, but older San Francisco installs sometimes sit closer at 5-foot spacing to handle slope) and note the panel height. That measurement is your compatibility key: a profile cut for 6-foot on-center won’t fit a 5-foot frame cleanly without adapter brackets, which is the most common gotcha we see when homeowners order replacement sections online and then can’t get them to sit flush.
On the OEM-versus-aftermarket question for IKO specifically: genuine IKO profile-matched parts fit without modification and keep the line consistent, while quality aftermarket equivalents are often easier to source faster in the Bay Area and can work well on a repair – but only if the profile geometry matches. We check that fit before we quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Fence Installation Is Failing
- Posts wobbling at the base after rain. The post footer has lost its grip in saturated soil – a common problem in San Francisco’s clay-heavy lots where drainage is poor and water pools at the base.
- Gate sagging and dragging. Hinge hardware or the gate frame has fatigued, and it gets worse fast because the gate carries the most dynamic load on the whole run.
- Rust streaks or galvanized corrosion on brackets. Salt air accelerates corrosion on standard hardware; inland fence hardware that holds up in Walnut Creek can fail within a few seasons near the coast.
- Panels leaning or racking out of plumb. Ground movement, a root heave, or a failed post anchor is letting the panel shift – left alone, it stresses every adjacent panel.
- Loose or missing pickets after wind. Fasteners have backed out or the picket profile has cracked at the nail line, which is your sign the panel needs replacement, not just a screwdriver.
Which one you’re seeing matters. A wobbling post isn’t the same repair as a loose picket, and pricing follows the diagnosis.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Francisco, IKO fence installation and replacement runs $4,130 to $10,620 installed. That range covers materials, labor, removal of the failed section, and resetting posts where needed. What pushes you toward the top of the range: longer runs, taller panels, custom gates, difficult access (a steep San Francisco hillside lot adds labor), and post replacement rather than reusing existing posts. What keeps you near the bottom: a single section swap, reused posts, and standard hardware.
Our pricing is upfront and line-itemized – you see the part cost and the labor cost separately, and the number we quote is the number you pay. We don’t stock parts, so each quote reflects what the exact IKO-compatible component actually costs to source at the time. Every installation is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Here’s the honest split. You can safely check panel height, measure post spacing, locate the manufacturer stamp, and photograph the failed section – all of that helps us quote accurately and costs you nothing. What goes wrong for homeowners doing the swap themselves: post footers reset in the wrong soil condition, gate hinges mounted at the wrong height so the gate sags within weeks, and mismatched profile geometry that never sits flush. Fence work isn’t high-voltage dangerous, but a fence that fails again in six months is wasted money and wasted weekends.
If you’re not sure what’s failing, call us at (866) 320-2646. A live person answers around the clock, and estimates are free.
FAQs
With proper installation and material-matched hardware, an IKO fence run in San Francisco typically holds up 10 to 15 years, though salt air near the coast shortens hardware life to roughly 5 to 8 years unless corrosion-resistant fasteners are used. Call (866) 320-2646 for an exact quote on your run.
Often yes. A single failed panel, a sagging gate, or loose hardware can usually be repaired without replacing the whole run. Post failure or widespread leaning is the threshold where repair stops making financial sense. Call (866) 320-2646 and we’ll tell you which side of that line you’re on.
A single section replacement is typically a half-day to full-day job; a full fence run in San Francisco usually takes one to three days depending on length and post work. Most jobs are completed in a single visit when access is straightforward.
We don’t stock parts and don’t carry inventory on a truck – we identify your exact IKO profile from the manufacturer stamp and measurements, then source the compatible component before the scheduled install. That’s why an accurate photo and measurement saves you time and money.
Ready to get a real number on your IKO fence? Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate and design consult. We also work with KraftMaid, Cambria, and Silestone across our other service lines. Live person, 24/7. Upfront pricing, no surprises. From foundation to finish line.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.