Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Driveway & Pavers: The San Francisco Owner’s Guide
We install James Hardie-spec driveway and paver systems across San Francisco, and typical installed pricing runs from $8,260 to $21,240 for a paver driveway and $4,130 to $12,980 for a paver patio. We’re an independent service provider, not affiliated with James Hardie. Most owners discover a failure the same way: a paver lifts at the driveway apron after a wet winter, or the hardscape board edging cracks along a Sunset curb where the fog never quite dries. Once water gets under the field, the problem compounds.
Which James Hardie Models This Applies To
James Hardie’s exterior line is built around fiber cement, and while the brand is best known for siding, trim, and the HardiePlank and HardiePanel families, its hardscape-adjacent products and finish systems are specified in San Francisco driveway and paver assemblies more often than most owners realize. If your home has a fiber cement fascia board, a HardieBacker underlayment under a patio border, or a fiber cement edging strip, we can identify what you’re running before we quote.
The compatibility gotcha: James Hardie does not publish a single “driveway paver” part number the way it does for lap siding, so the correct match is by dimension and profile, not a model label. Measure the thickness (fiber cement trim typically runs 5/16 to 1 inch) and the width of the piece, photograph the back stamp if there is one, and note where it sits in the assembly. That identification step is where most inexperienced crews guess and get it wrong.
For OEM versus aftermarket on a James Hardie system, OEM matching matters for exposed edges and any piece that carries the weather seal, because a color and texture mismatch is obvious on a street-facing driveway in San Francisco. Interior aftermarket trim is far more forgiving. Because we’re a curated partner rather than a parts warehouse, the honest answer is: we source and install, we don’t sit on hardscape stock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Driveway & Pavers Is Failing
- Lifted or rocked pavers at the apron: Water is getting under the base course and freezing or pumping it loose, which is the first failure we see after a heavy San Francisco rainy season.
- Cracked or crumbling fiber cement edging: The trim board has absorbed moisture or the finish has failed at the ground contact point, and the piece needs replacement before it spreads.
- Hairline cracks in the field: Settlement in the sub-base, often from an undersized gravel layer, opens joints that then take on water.
- Weeds and sand loss through the joints: The joint sand has washed out, which means the drainage path is being bypassed and the base is degrading.
- Color fading or chalking on the surface: UV and salt air in San Francisco wear the finish, and a chalky surface signals the protective layer is gone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Francisco, a paver driveway installation runs $8,260 to $21,240, a paver patio installation runs $4,130 to $12,980, a concrete driveway installation runs $5,310 to $14,160, asphalt paving runs $4,130 to $10,620, and a full driveway replacement runs $5,900 to $16,520. Sealing alone is $295 to $825.
The range is driven by square footage, base excavation depth, the condition of the existing slab or subgrade, and whether we’re matching an existing James Hardie finish piece or replacing a full assembly. You get a written line-item quote before work starts, so the parts, the excavation, and the labor are all on paper. Every job carries our 730-Day Done Right Promise: if it’s not done right, we make it right. Upfront pricing, no surprises.
DIY or Call Us?
An owner can safely check a few things: photograph the failing paver or trim piece, measure the thickness and width, note whether water pools toward the house, and look for a back stamp. That information helps any crew quote accurately.
Where DIY goes wrong on a James Hardie assembly is the base. Lifting pavers and re-setting them without correcting the subgrade or drainage simply kicks the failure down the road, and setting fiber cement edging without the right ground contact detail invites moisture damage. This isn’t dangerous work in the way springs or electrical panels are, but it is base-work, and a bad base in a San Francisco clay-and-fog climate fails faster than anywhere else in the Bay.
Most jobs are completed in a single visit once the site is prepped. Call (866) 320-2646 and a live person answers, 24/7. Technicians are background-checked and arrive in uniform.
FAQs
A properly installed paver field on a properly compacted base typically lasts 25 to 30 years, while the fiber cement trim pieces in the assembly often need attention at 10 to 15 years in a fog-heavy San Francisco microclimate. The base is the real variable: get the excavation and drainage right and the surface lasts decades. Call (866) 320-2646 for an exact assessment.
Yes, in many cases. If the failure is isolated to a few pavers or one trim piece, we lift and replace just that area and re-set the base beneath it. If the whole field is rocking or the subgrade has failed, a partial repair won’t hold. We’ll tell you which you have, honestly.
An isolated paver or trim piece swap is usually a half-day to one full visit. A driveway replacement runs several days to a week depending on square footage and base work. We give you the timeline in writing on the quote so you aren’t guessing. Call (866) 320-2646 for a free estimate.
We identify by dimension and profile rather than a model number, since James Hardie’s hardscape-adjacent pieces aren’t labeled like siding. We match the thickness, width, and finish, pull from verified supplier partners, and confirm the match before we tear anything out. You get the piece and the labor on one line-item quote.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.
Call (866) 320-2646 for a free project estimate. We also service KraftMaid, Cambria, and Silestone across San Francisco, and every project is backed by our 730-Day Done Right Promise.