A Groundwork company - serving San Francisco, CA

Jerith Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Driveway & Pavers: The San Francisco Owner’s Guide

We install and correct Jerith-compatible driveway and paver work throughout San Francisco, and most paver-related repairs and re-sets land in the $8,260 – $21,240 range for a paver driveway installation, with smaller repairs far below that. When we repair rather than replace, we generally do it in a single scheduled visit. Owners usually discover the failure the same way: a paver shifts underfoot after a hard rain, a once-crisp border creeps out of line, or a section of bedding starts sinking and every car door drags the curb lower.

Call (866) 320-2646

Here’s the part that surprises people. Jerith is best known for aluminum ornamental fencing, gates, and rails. When a homeowner in San Francisco asks about “Jerith driveway and pavers,” what they usually have is a Jerith border, panel, or edge detail running alongside a paver apron – not a pavers system made by Jerith itself. So this page treats the job the way it actually comes up: matching the right hardscape part to the detail you have, then getting the base and the pavers right so it all sits flat. We’re an independent service provider, not affiliated with Jerith.

Key Takeaways

  • Most “Jerith driveway” failures are base and bedding problems, not the paver itself.
  • Installed paver driveway work in San Francisco runs $8,260 – $21,240; sealing runs $295 – $825.
  • We help you identify the right part by measurement and profile, not by guessing at a catalog photo.
  • Upfront pricing, no surprises – you get a written line-item quote before any cutting starts.

Which Jerith Models This Applies To

Because Jerith’s hardgoods line is built around aluminum fence, rail, and gate systems, the “model” question on a driveway usually comes down to two things: the aluminum border, edge rail, or decorative element tied to the fence line, and the pavers or concrete the driveway is actually made of. If you have a Jerith accent rail bordering a paver apron, look for a stamped mark on the rail end or post cap. On the paver side, manufacturers name their products by series and color, and those names appear on the shrink wrap of unopened bundles or on the original contractor’s invoice.

The reliable way to identify what you have is measurement. Aluminum rail heights typically fall in the 48-inch to 60-inch range, post spacings run on standard increments, and paver thickness is the giveaway on the ground – a thinner profile is usually a walkway paver, while a thicker one is meant to take vehicle weight. One compatibility gotcha we see in San Francisco: the concrete or masonry cap a fence line sits on may not match what a replacement accessory assumes, so profiles have to be matched by eye and tape measure, not by listing photo.

On the OEM-versus-aftermarket call, an aluminum rail, cap, or edge detail can often be matched by a quality equivalent when the original is no longer available – it’s the look and the fit that matter more than the stamp. For the pavers themselves, matching the exact factory series is worth the effort when you’re pulling up only a small area and want a seamless blend. If you’re rebuilding the whole driveway, you’re choosing fresh rather than matching. Either way, we tell you which path is honest for your situation before you spend.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Driveway & Pavers Is Failing

These are the real symptoms we work with, and each one points at a cause:

  • Pavers rocking or shifting underfoot. The bedding sand or base has washed or settled out underneath. On the slopes common in San Francisco, water moving downhill is usually the culprit.
  • Sunken or heaved sections. Poor compaction at install or freeze-free but water-saturated soil pushing back up. A driveway that dips in the same spot after every storm is telling you the base is the problem.
  • Loose or leaning aluminum border rail. The post set in its footing has shifted or the fasteners at the cap have corroded. This is common where a border runs alongside a paver apron.
  • Joint sand washing out. Missing sand between pavers means the interlock is weakening, and weeds and water get in fast. Refilling and re-sealing is the cheap fix; ignoring it is the expensive one.
  • Color loss, efflorescence, or moss in the shade. The coastal fog and damp shade in neighborhoods like the Sunset and Richmond give moss and algae a foothold. It’s cosmetic until it isn’t – moss holds moisture that slowly degrades the surface.

If two or more of these are happening at once, the underlying base is the thing to look at, not just the surface.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s the honest installed pricing for driveway and paver work in San Francisco, using the same ranges we quote across the city:

Job Installed Range (San Francisco)
Paver driveway installation $8,260 – $21,240
Concrete driveway installation $5,310 – $14,160
Asphalt driveway paving $4,130 – $10,620
Driveway replacement $5,900 – $16,520
Driveway sealing $295 – $825
Paver patio installation $4,130 – $12,980

What drives the range: square footage, how much of the existing base has to come out, slope and drainage corrections, and whether we’re matching a specific paver series or choosing fresh. Parts plus labor are itemized, so you see the paver, the border rail or detail, the base material, and the labor separately. The work carries our 730-Day Done Right Promise – if it’s not done right, we make it right – and pricing is upfront, no surprises.

DIY or Call Us?

Some things you can safely check yourself. Walk the driveway after rain and mark where water pools. Note which pavers rock and whether the joint sand is missing. Look at the aluminum border rail and see if it’s leaning or if the fasteners look corroded. Take a tape measure to paver thickness and rail height – that’s the information we need to match a part.

Where DIY goes wrong: pulling individual pavers without resetting the base underneath just moves the problem. Re-securing a leaning rail into failing footing holds for a season. And doing any of it on a slope with poor drainage means the water keeps working on it. The fix that lasts addresses the base, the drainage, and the paver together. If the failure involves any leaning structure or water pushing against a retaining element, that’s where a trained professional takes over rather than a homeowner digging in.

Call us at (866) 320-2646 and we’ll tell you what you’re looking at. Estimates are free, and the number you see is the number you pay.

FAQs

How long do Jerith-bordered paver driveways last in San Francisco? A properly built paver driveway with a well-compacted base generally lasts 25 to 30 years, and the aluminum border component outlasts the pavers if the footing was set right. In San Francisco, moisture from fog and winter rain is the biggest variable – good drainage and re-sealing every few years extend life. Call (866) 320-2646 for an exact assessment.

Can it be repaired instead of replaced? Often, yes. If only a section of pavers is heaving or the joint sand has washed out, we can lift, re-level the base, and reset without tearing up the whole driveway. A full replacement is usually only necessary when the base has failed across a large area or the existing driveway is undersized for vehicle weight. Call (866) 320-2646 and we’ll tell you which path makes sense.

How long does the swap or repair take? A targeted paver reset or border rail repair is typically completed in a single visit. A full paver driveway installation takes longer – usually several days depending on square footage, base removal, and drying time. We give you a realistic schedule in the written quote, not a best-case guess. Call (866) 320-2646 to schedule your free estimate.

How do you source the part? We match by measurement and profile – paver thickness, color series from the bundle or invoice, and aluminum rail height – then source an OEM part where it’s available or a quality equivalent where it’s not. We tell you which it is before you commit.

While we’re on the subject of trusted brands, homeowners also ask us about kitchens and countertops – we work with KraftMaid, Cambria, and Silestone on those jobs. But your driveway is the job at hand, and it’s one we know well.

Every call is answered by a live person, 24/7, and our technicians are background-checked and arrive in uniform. Financing is available at 0% for 18 months, with $1,000 off projects over $10,000. When you’re ready to sort out the driveway, call (866) 320-2646 for your free estimate and design consult – we’ll walk the site, tell you straight what’s failing, and put the fix in writing.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch