Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Driveway & Pavers: The San Francisco Owner’s Guide
We install Kohler-compatible hardscape systems for San Francisco homeowners, and an installed paver driveway typically lands between $8,260 and $21,240 depending on square footage, base prep, and color or finish selection. Kohler’s hardscape line is durable but not indestructible, and most homeowners discover a failure the same way: a single paver shifts underfoot after winter rain, or a hairline crack opens across a border course in the Sunset or Richmond District. If you have found that symptom, you’re in the right place. We match the specific Kohler paver series, order the correct replacement pieces, and install them with upfront pricing and no surprises.
Which Kohler Models This Applies To
Kohler paver systems share family names across their lines, but the actual footprint thickness, color code, and chamfer style change between series. A paver from one series won’t sit flush against another, and in a full driveway that mismatch telegraphs forever. Here’s how to identify what you actually have:
- Check the original installation record. Kohler hardscape paperwork lists the series name and color code. If you bought the house with a driveway already installed, ask the previous owner or check the disclosure packet.
- Measure a paver. Most Kohler driveway pavers run between 60mm and 80mm thick. A caliper or a good tape measure on a lifted edge confirms which series you’re dealing with.
- Look for the stamp. Many Kohler units carry a mold mark on the underside. Pull a loosened paver and check.
Once we know the series, the OEM-vs-aftermarket call is straightforward. Kohler OEM replacement units match color and dimension exactly. A quality aftermarket lookalike can save money on a full install, but on a partial repair, mismatched tone and thickness almost always shows. We stock no parts and carry nothing on a truck. Every piece we install is ordered to your project, which means we can also pair with KraftMaid, Cambria, or Silestone finishes if you’re coordinating a broader exterior refresh.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Driveway & Pavers Is Failing
- One or more pavers rock underfoot. The base layer has settled or washed out. This happens most often in San Francisco hillside lots where runoff concentrates along a driveway edge.
- Hairline cracks in a border course. Thermal cycling from cool fog to direct sun expands and contracts the paver. A single crack usually means a binding joint or a too-thin base.
- Color fade or efflorescence. White mineral bloom or washed-out tone signals moisture trapped beneath the surface. San Francisco’s marine layer keeps pavers damp more months than most of California, and that accelerates the issue.
- Sunken sections near the garage apron. Vehicle weight over a poorly compacted base pushes the paver down over time. This is the most common failure we see on sloped San Francisco driveways.
- Weed growth through the joints. Polymeric sand has broken down. When the joint fails, water gets into the base, and the whole system starts to move.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed replacement pricing in San Francisco runs by scope. A full paver driveway installation ranges from $8,260 to $21,240. A full driveway replacement lands between $5,900 and $16,520. Resealing alone is $295 to $825, and that’s often the right call if the pavers are structurally sound. Concrete driveway installation runs $5,310 to $14,160 if you’re considering a switch. Paver patio installation, if the same project touches your backyard, is $4,130 to $12,980.
What drives the range: square footage, base excavation depth, drainage work on a sloped lot, and whether the existing driveway has to come out. Every quote is line-itemed and fixed. The number you see is the number you pay, and the work is covered by our 730-Day Done Right Promise. We also offer 0% financing for 18 months, a free project estimate and design consult, and $1,000 off projects over $10,000.
DIY or Call Us?
You can safely walk the driveway and mark each moving or cracked paver with chalk. You can lift a loosened unit to check the base depth. That’s the extent of what we’d recommend. Setting a new paver correctly means recompacting the base, matching the series precisely, and re-locking with polymeric sand. Do it wrong on a San Francisco slope and the next rainy season will undo the work. There’s no electrical or high-tension hazard here, but the base prep is the part that separates a 20-year driveway from a 2-year one.
Call (866) 320-2646 and a live person will pick up, 24/7. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and we’ve been serving San Francisco since 2014.
FAQs
A properly installed Kohler paver driveway lasts 20 to 30 years in San Francisco’s coastal climate. The biggest lifespan variable is base prep, not the paver itself. Call (866) 320-2646 for a free estimate.
Yes, if the failure is isolated. A single rocking paver or a cracked border course is a spot repair, not a full replacement. On a paver driveway installation we’re looking at $8,260 to $21,240, while a driveway replacement runs $5,900 to $16,520, so a targeted fix saves real money. Call (866) 320-2646 and we’ll tell you which scope makes sense.
A spot repair is usually completed in a single visit. A full paver driveway runs several days depending on square footage, base work, and access on a San Francisco lot. Call (866) 320-2646 to schedule your free estimate.
We identify your series by model name, paver thickness, and mold mark, then order the exact replacement unit. We hold no stock and carry nothing on the truck, so every piece is matched to your project, not a guess. Call (866) 320-2646 to start the process.
Every San Francisco driveway we install is built to last and backed in writing. If you have a Kohler paver that’s failed, or a driveway that needs a full rebuild, call (866) 320-2646 for a free estimate. A live person answers 24/7, and you’ll have a written, line-itemed number in hand before anything starts.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.