Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The San Francisco Owner’s Guide
We build Kohler-finished home additions and accessory dwelling units (ADUs) across San Francisco, with installed costs typically landing between $53,100 and $153,400 for an addition and $106,200 to $259,600 for a full ADU. Kohler fixtures and finish packages work into both scopes – a bathroom suite, a kitchen sink and faucet set, a shower system in the new bath. We’re an independent service provider and not affiliated with Kohler, but our technicians have up to 12 years of experience matching Kohler specs to the rough-in dimensions a new build actually commits you to.
Owners rarely call us about a single failed part on an addition. They call because the rough-in their first contractor framed doesn’t fit the Kohler shower valve they already bought, or because a permitted ADU stalled mid-framing and the finish schedule was never figured out. That’s the real failure pattern in San Francisco: not a broken cartridge, but a build where the plumbing spec and the framing spec were never reconciled before the drywall went up.
Key Takeaways
- Addition range: $53,100-$153,400. ADU range: $106,200-$259,600. Garage conversion: $35,400-$94,400.
- Kohler rough-in dimensions must be locked before framing. Retrofitting after framing is where budgets break.
- San Francisco ADUs run into state and local permitting layers most single-trade contractors don’t track.
- Every project carries the 730-Day Done Right Promise, and calls are answered by a live person, 24/7.
Which Kohler Models This Applies To
Kohler doesn’t make “an addition part” – what it makes is a fixture and finish ecosystem that a new room has to accommodate. On a home addition or ADU, the Kohler components you’ll specify are typically the shower valve and trim, the toilet rough-in, the vanity and sink, and the kitchen faucet. Each one carries its own rough-in spec that has to be built into the wall before the wall closes.
The compatibility gotcha most owners miss: Kohler shower valves from different series have different rough-in depths, and the plaster guard that ships with the valve is not a suggestion. If your framer buries it or your tile setter shims past it, the trim will sit proud of the finished wall or the handle won’t seat. Kohler toilets also vary between standard 12-inch and 10-inch or 14-inch rough-ins, and a new-construction wall framed at the wrong setback means an offset flange and a toilet that never looks right.
Identify your parts before the rough-in, not after. Pull the model number off the Kohler box or spec sheet, measure the actual rough-in the plumber set, and confirm the two match. On OEM versus aftermarket, we specify genuine Kohler valve cartridges and trim on new construction – the aftermarket equivalents save a few dollars and cost you a trim fit that’s off by a fraction you’ll notice every morning. For other finish brands in the same build, we also work with KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Home Additions & ADU Is Failing
If you’re already living in the space and something’s wrong, these are the symptoms that point to a specification or installation failure rather than a maintenance item:
- Trim sits proud of the tile or won’t seat flush. The valve rough-in depth was wrong or the plaster guard was bypassed. You’re looking at opening the wall, not replacing a cartridge.
- The handle turns but nothing happens, or it drips at the trim plate. A Kohler cartridge can fail, but on a recent build it’s more often a valve body set at the wrong depth or debris left in the line at commissioning. Both trace back to the install.
- The toilet rocks or the base won’t sit level. Rough-in setback or flange height was off, and the installer compensated with shims instead of fixing the flange.
- Water pooling at the shower curb or a soft spot at the wall base. Missing or breached waterproofing where the Kohler shower system meets the pan. In San Francisco this shows up fast because our cool, damp winters never let a slow leak dry out between storms.
- Cabinet doors or drawer fronts out of alignment in a new addition. Usually framing movement or a floor that wasn’t leveled before set. It reads as a cabinet problem and traces to the rough build.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing for this scope in San Francisco, installed:
| Scope | Installed Range |
|---|---|
| Home Addition | $53,100-$153,400 |
| ADU Construction | $106,200-$259,600 |
| Garage Conversion | $35,400-$94,400 |
The range is driven by square footage, foundation conditions, how much of the plumbing and electrical is new, and the finish level you choose. A garage conversion with existing walls and slab sits at the low end; a ground-up ADU with new foundation, full kitchen and bath, and a Kohler shower-and-vanity package sits well into the high end. We quote parts and labor as line items so you can see what the Kohler fixtures actually cost against the rough-in labor that surrounds them. Upfront pricing, no surprises: the number on the written quote is the number you pay, and the work is backed by the 730-Day Done Right Promise.
DIY or Call Us?
Some things you can check yourself on a new addition. Confirm the Kohler rough-in dimensions against the plumber’s actual work before drywall. Check that the toilet flange sits flush with the finished floor. Look at the shower trim plate for gaps that suggest a valve depth problem. Those are measuring tasks, not building tasks.
What you shouldn’t try yourself: re-framing, re-plumbing a rough-in, moving a valve body, or repairing waterproofing under a finished shower. Cutting into a sealed shower assembly to reach a faulty Kohler valve risks the waterproofing layer, and redoing it wrong means the whole pan comes out. Structural changes and new construction also need San Francisco permits and inspections – work done without them can void your coverage and stall a sale. Call (866) 320-2646 and we’ll walk through what you’re seeing and what it takes to fix it.
FAQs
Kohler’s better valve and trim lines are built to run 15 to 20 years with normal use, and the trim finishes often outlast the cartridge inside them. San Francisco’s damp air and coastal salt exposure wear finish coatings faster on exterior-adjacent fixtures, so budget for a cartridge swap somewhere in that window and a trim refresh near the end. Call (866) 320-2646 for an exact quote on your fixtures – estimates are free.
Sometimes. A dripping Kohler faucet or shower valve is often a cartridge or seat, and swapping the cartridge is a real repair. What can’t be repaired is a rough-in set at the wrong depth, a breached shower pan, or a toilet on a bad flange – those are rebuilds, not part swaps. We’ll tell you which one you’re facing before any work starts.
A single Kohler cartridge swap is a same-visit job. A home addition typically runs several months start to finish, and an ADU runs longer given San Francisco’s permitting and inspection timeline. We give you a real schedule in the written quote, not a best-case number.
We specify genuine Kohler parts and fixtures against the model numbers on your spec sheet or the existing label, and we match rough-in dimensions before ordering. We don’t carry stock or claim parts on a truck – everything is ordered to your project. To get your scope and pricing moving, call (866) 320-2646. No-hassle upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000 apply.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.