Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Fence Installation: The San Francisco Owner’s Guide
In San Francisco, a complete Master Halco fence installation typically runs $4,130 – $10,620, and that includes materials, removal of the old fence, grading the fence line, and hauling everything off-site. Most jobs are scheduled in a single visit once the estimate is signed. Master Halco is a name most people meet through the parts, not the packaging: the hardware, posts, and pickets that show up at their local supplier, and the fence that’s already standing in their yard.
Homeowners usually discover a problem in one of three ways. A section of fence starts leaning after a wet winter. A gate stops latching and drags on the ground. Or the pickets go soft and chalky after years of coastal fog. In San Francisco, those three symptoms alone account for most of the fence calls we get, and almost all of them trace back to the fence line, the footings, or the hardware that holds the panels together. The good news is that you’re rarely replacing the whole fence when one piece fails. We’ll tell you exactly what failed, why, and what it takes to fix it right.
Which Master Halco Models This Applies To
Master Halco makes fence products across several lines, and the parts don’t interchange freely. The biggest gotcha is post size. A standard residential post is 4-inch square, but a 4-inch nominal post and a 4-inch actual post are not the same thing, and the difference is about half an inch. If your existing post measures around 3.5 inches across the face, you’re dealing with the lighter line and the standard brackets won’t seat without a shim. Check the actual measurement with a tape before you order anything.
Another one: rail heights and picket spacing vary by series. Measure the gap between pickets and the total width of a panel section, and take a photo of the post and rail joint before you call anyone. We use that photo to match your existing line instead of suggesting a replacement that looks close but won’t line up.
On the OEM versus aftermarket question: for a fence that has to take San Francisco’s marine layer and wind, we lean toward exact-match hardware from the same series, because a mismatched bracket will work loose faster than the post it’s attached to. For pickets and rails, a good aftermarket equivalent at the same weight and finish often makes sense if the exact series isn’t available locally. We’ll tell you which side of that line each part falls on, and why, before you buy. Groundwork Construction Co. of San Francisco is an independent service provider, not affiliated with Master Halco. We install and repair the product, and we’re upfront about where the parts come from.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Master Halco Fence Installation Is Failing
- Posts that lean after rain. A post that shifts seasonally usually points to a footing that never went deep enough for San Francisco’s soil. When the ground saturates in one winter, the post rocks, and the hardware takes the load.
- A gate that drags or won’t latch. A sagging gate means the hinge side post has moved or the hinges have wallowed out. Fix the post, not the hinge, or you’ll be back at it in six months.
- Soft, chalky pickets. Coastal fog and salt air break down the finish faster than anywhere in the Bay Area. When you can push a fingernail into the wood and it leaves a mark, the board is done.
- Loose or missing fasteners. Brackets backing out of a post usually mean the original fastener was undersized or the wood around the hole has rotted. Replacing the screw alone won’t hold.
- A visible gap or dip in the fence line. A dip means ground settling under a footing. It’s a footing problem showing up as a fence problem, and it gets worse every season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Master Halco fence installation in San Francisco runs $4,130 – $10,620, and that range covers the whole job, not just the part. Here’s what moves the number:
- Line footage and height. A short privacy run costs less than a full perimeter, and taller fence costs more per foot.
- Removal and haul-off. Tearing out an old fence and disposing of it adds labor.
- Footing work. Posts set in concrete cost more than posts on a surface mount, but they last longer. In San Francisco, we usually recommend concrete footings.
- Gate hardware. Hinges, latches, and self-closing arms add to the total.
Every estimate is written line by line, so you see the material, the labor, and the footing cost separately. No-hassle upfront pricing, and the number on the estimate is the number you pay. The work is covered by our 730-Day Done Right Promise. If it isn’t done right, we make it right.
DIY or Call Us?
You can safely check three things yourself: measure the actual post width, look for rot at the base of each post, and try the gate hinge for wobble. Those checks tell you whether you’re looking at a part replacement or a footing rebuild.
Where DIY goes wrong is setting posts. Getting a post plumb and at the right depth in San Francisco’s soil takes more than a level and a bag of concrete, and a post that’s a quarter inch off at the base shows up as a gate that won’t close two years later. If your problem is a leaning post or a sagging gate, those are the calls we’d rather handle. If it’s a single missing bracket or a loose hinge, you can fix that yourself and we’re glad to tell you what to buy.
Call (866) 320-2646 to schedule a free estimate. A live person answers, any time of day.
FAQs
A properly set wood fence in San Francisco typically lasts 12 – 15 years before pickets go soft or posts want replacing, and a steel or aluminum line can run much longer. Coastal fog is the main reason: it keeps the wood damp for longer stretches than inland climates, so finish and footing matter more here than most places. Call (866) 320-2646 if you want an honest read on what’s left in yours.
Yes, and most of the time it should be. A single broken picket, a loose bracket, or a sagging gate can be fixed without touching the rest of the fence. The exception is a leaning post with a bad footing, which needs to come out and go back in. We’ll tell you which side of that line you’re on before you spend anything.
A single section or gate swap is usually a same-day job, and a full perimeter run takes more than one visit depending on footage and footing work. We’ll give you a realistic window in the estimate, not a best-case guess. Call (866) 320-2646 for scheduling.
We match the part to your existing fence by series, post size, and rail height, using a photo of the joint and an actual tape measurement. That’s how we avoid the half-inch mismatch that comes from ordering by name alone. If the exact series isn’t available, we’ll walk you through a good equivalent and why it works. All of this is confirmed in the written estimate, so there are no surprises.
From foundation to finish line, we handle fence work across San Francisco and nearby areas. Our technicians have up to 12 years of experience, and every job is backed by the 730-Day Done Right Promise. Call (866) 320-2646 for your free estimate, and take $1,000 off any project over $10,000, with 0% financing for 18 months available.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.