Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Driveway & Pavers: The San Francisco Owner’s Guide
We install Mighty Buildings-compatible driveway and paver assemblies across San Francisco, and a full paver driveway replacement typically runs $8,260 – $21,240 installed, with most residential jobs finished in one to three days once materials land. Concrete replacements run $5,310 – $14,160, and asphalt paving sits at $4,130 – $10,620. We’re an independent service provider, not affiliated with Mighty Buildings.
Owners usually discover the problem the same way: a hairline crack that spreads across a San Francisco winter, a paver that rocks underfoot on the slope of a Noe Valley driveway, or standing water that pools against the garage threshold after the first big rain. Mighty Buildings homes carry specific panel and foundation interfaces, and the driveway surface is where that interface meets the ground. When it fails, it fails at the joints first.
Which Mighty Buildings Models This Applies To
Mighty Buildings built its reputation on prefab ADUs and single-family units, and the driveway and hardscape detail depends on which generation of their panelized system your home uses. The earlier panel-based units and the later 3D-printed wall systems handle foundation edge conditions differently, and that changes what the driveway ties into at the perimeter. If you’re unsure which you have, the foundation stem wall and the panel seam layout tell you. We check this before quoting.
Identifying the right assembly means measuring, not guessing. We record the driveway width and depth at the garage apron, the slope percentage from the street to the threshold, and the paver thickness at an existing joint. Material thickness on a Mighty Buildings driveway matters more than on a stick-built home because the prefab foundation edge sits at a fixed elevation. Get the paver depth wrong and you’ll have a lip at the garage door that catches water and, eventually, car tires.
The OEM-versus-aftermarket call is straightforward on this part. Paver and hardscape systems aren’t branded by Mighty Buildings; they specify performance, and the material itself comes from manufacturers like Belgard. That means a quality aftermarket paver matched to the correct thickness and drainage spec performs exactly like the original. What you should not do is swap to a thinner paver to save money on a Mighty Buildings driveway in San Francisco. The load path and drainage depend on the depth. We also handle KraftMaid, Cambria, and Silestone brand work elsewhere in the home if your project runs past the driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Driveway & Pavers Is Failing
- Joint cracks that reappear after patching. The sub-base has shifted, not just the surface. In San Francisco’s clay-heavy soils, this happens when water gets under the pavers and freezes or expands the base layer.
- Pavers that rock or settle unevenly. Individual units have lost their bedding sand or the base wasn’t compacted to depth. On a slope, this is a trip hazard and gets worse with each rainy season.
- Pooling water against the garage threshold. The driveway slope has drifted below the minimum grade away from the structure. This is the failure most likely to damage the home, not just the driveway.
- Efflorescence and white staining on the pavers. Salt migrating out of the concrete or base material, often a sign of trapped moisture underneath. Cosmetic early, structural later.
- Spalling, chipping, or sunken edges at the apron. The transition between driveway and garage slab has separated. Common on Mighty Buildings units where the prefab edge meets poured concrete.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
San Francisco driveway pricing runs higher than most of the Bay Area because access, hauling, and permit requirements add labor. Here’s what the market looks like installed:
- Paver driveway installation: $8,260 – $21,240
- Concrete driveway installation: $5,310 – $14,160
- Asphalt driveway paving: $4,130 – $10,620
- Full driveway replacement: $5,900 – $16,520
- Driveway sealing: $295 – $825
- Paver patio installation (if you’re extending the hardscape): $4,130 – $12,980
The range is driven by square footage, base depth required for your soil, paver grade, and whether a permit is needed for the grade change. We price the material and the labor as separate line items so you see exactly what you’re buying. Upfront pricing, no surprises: the number you see is the number you pay, and every driveway is covered by our 730-Day Done Right Promise. The material partners we work with, Belgard among them, carry their own product warranties on top of that.
DIY or Call Us?
Some checks are safe for any owner. You can photograph the cracks with a tape measure alongside for scale, note where water pools after rain, test pavers for movement by hand, and confirm the driveway slope with a level. That information makes a quote faster and more accurate.
What goes wrong with DIY on this part isn’t the surface; it’s the base. Paver driveways fail from underneath, and getting the excavation depth, compaction, and drainage grading right on a San Francisco slope is where most homeowner installs come apart within two winters. There’s a real safety dimension too: a driveway that slopes toward the garage can push water into the structure, and lifting pavers on a grade without proper edge restraint creates a genuine hazard. Our technicians have up to 12 years of experience with exactly this soil and slope condition. Call (866) 320-2646 for a free estimate.
FAQs
A properly installed paver driveway lasts 25 to 50 years in San Francisco’s climate, longer than asphalt and comparable to concrete. The caveat is the base: pavers over a poorly compacted or shallow base fail in 5 to 10 years regardless of the paver quality. Our 730-Day Done Right Promise covers the workmanship on that base.
Sometimes, yes. Isolated cracked pavers, settled units, and missing sand can be lifted, re-bedded, and re-sanded without a full replacement, and driveway sealing at $295 – $825 protects a driveway that’s still sound. If more than about 20 percent of the surface has shifted or the base is compromised, replacement is the more honest call. Call (866) 320-2646 and we’ll tell you which one you’re looking at.
Most paver driveway replacements on a Mighty Buildings home in San Francisco take one to three working days for the install, plus a day for excavation and base prep. Concrete needs curing time before you drive on it, usually 5 to 7 days. We schedule around weather and tell you the realistic window upfront, not the optimistic one.
We measure your driveway’s width, slope, and paver depth on site and match the replacement to your foundation edge and drainage spec. Because Mighty Buildings doesn’t brand the hardscape itself, we source from quality manufacturers like Belgard at the correct thickness rather than hunting an OEM part number that doesn’t exist. That’s how you get the right fit without waiting on a specialty order.
If your Mighty Buildings driveway in San Francisco is cracking, pooling water, or rocking underfoot, the fix starts with a conversation. We answer the phone with a live person 24/7, provide a free project estimate and design consult, offer 0% financing for 18 months, and take $1,000 off projects over $10,000. Call (866) 320-2646 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.