A Groundwork company - serving San Francisco, CA

Moen Windows & Doors in San Francisco, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Windows & Doors: The San Francisco Owner’s Guide

We install Moen-compatible windows and doors across San Francisco, at installed prices that typically run $5,310 – $17,700 for a window replacement and $9,440 – $29,500 for impact-rated installation. Door and window hardware and component swaps are quoted line by line, and most single-component jobs wrap up in a single visit. Before you call, we’ll price the exact part against your model number so there are no surprises.

Call (866) 320-2646

Owners usually find the problem the slow way. A window starts dragging in its track, or the sash won’t stay up on a foggy Bernal Heights afternoon. Then a hinge squeaks on a door that used to close flush, or the lock mechanism won’t catch on the first try. By the time a Moen window or door part fails outright, most people have already lived with the symptom for a season.

Key Takeaways

  • Moen-compatible window replacement in San Francisco runs $5,310 – $17,700; impact-rated runs $9,440 – $29,500.
  • Match the part to your model number before ordering; Moen hardware isn’t universal across series.
  • We’re an independent service provider, not affiliated with Moen, and we source OEM or quality aftermarket parts to order.
  • Our technicians have up to 12 years of experience, and every job is backed by the 730-Day Done Right Promise.

Which Moen Models This Applies To

Moen window and door components live in a handful of families: casement and awning operators, sliding patio door rollers and tracks, multi-point lock hardware, hinge sets, weatherstripping and sweeps, and screen and sash balances. The part you need depends entirely on the series, and here’s the gotcha most owners hit: Moen changed roller and operator geometry between production runs, so a roller that looks identical to yours may sit 3mm off in the track and bind. That’s why we match by the model label on the sash or door frame and by measured dimensions, not by eye.

Finding the right identifier matters. On most Moen windows, the manufacturer label sits on the top or side jamb of the fixed sash, and on doors it’s typically on the hinge edge or the top rail. Photograph it before you remove anything. If the label is gone, we measure the operator arm length, the roller diameter and tread width, and the lock center-to-center spacing. Those three numbers identify almost any part.

Then comes the OEM-versus-aftermarket call. For Moen specifically, OEM operators and multi-point locks are worth the money on doors you use daily, because the tolerances are tighter and the finish wears longer in coastal air. Quality aftermarket equivalents make sense for rollers, sweeps and weatherstripping, where the spec is simpler and the cost gap is real. We stock no parts and carry none on a truck; everything is sourced to your model, which means the right part shows up once instead of a “close enough” swap that fails again.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Windows & Doors Is Failing

Here’s what failure actually looks like, with the cause behind each symptom.

  • The sash drags or sticks in the track. Worn or flattened rollers, or a track caked with grit from wind-driven dust. If you have to muscle it, the roller is the usual culprit.
  • A casement crank grinds or won’t move the sash. A stripped operator gear or a bent arm. Forcing it makes it worse, and the arm can snap.
  • The door won’t latch on the first push. A multi-point lock that’s out of alignment or a worn strike. This gets called “the door swelled,” but it’s usually the hardware.
  • Drafts, whistling, or condensation between panes. Failed weatherstripping or a broken seal in a double-pane unit. In San Francisco’s fog belt, we see seal failure show up as a hazy film inside the glass.
  • Water stains at the sill after a storm. A failed sweep or deteriorated glazing seal letting rain in. Left alone, this reaches the framing, and that’s a bigger repair than a part swap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Window replacement in San Francisco runs $5,310 – $17,700, and impact-rated window installation runs $9,440 – $29,500. Single-component swaps (an operator, a roller set, a lock) are quoted as parts plus labor, line by line, so you see the number before we start. The range moves with window size and count, whether the frame or sill needs repair, and whether you’re going to impact-rated glass.

Upfront pricing, no surprises: the number you see is the number you pay. Every job is covered by the 730-Day Done Right Promise. We also back projects with $1,000 off over $10,000, 0% financing for 18 months, and a free project estimate and design consult. Calls are answered by a live person, 24/7. As an independent service provider, we’re not affiliated with Moen, but we source Moen-compatible parts and hold nothing but OEM or quality aftermarket equivalents.

DIY or Call Us?

Some things you can safely check on your own: clean and inspect the track for grit, tighten visible hinge screws, and note the model label. Those cost nothing and rule out the easy stuff. Where DIY goes wrong is inside the hardware itself. Casement operators and multi-point locks hold spring tension and need the right tools to remove without bending the sash or stripping the frame. And any work that means going out on a ladder to service a second-story window is height work, and that’s where injuries happen. Our technicians are background-checked and arrive in uniform, and our technicians have up to 12 years of experience matching Moen components. Most single-part jobs finish in one visit.

Call (866) 320-2646 for a free estimate. We’ll identify your part, quote it straight, and get your window or door working the way it should.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch