Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The San Francisco Owner’s Guide
Home additions and ADU work in San Francisco covered with Mr-Glass-compatible materials and systems typically runs $53,100 – $153,400 installed, and we schedule the work in planned phases rather than same-day dispatches. You’re usually reading this page because a door, window, or glazed wall unit in your addition or ADU has started to fail: a sash that won’t seat, fog between panes, water tracking at a sill, or a latch that no longer lines up. Those are the first signals that the Mr-Glass system in your build has moved past its service life or was installed without the flashing and drainage detail San Francisco’s fog belt demands.
Key Takeaways
- Mr-Glass parts fail predictably in San Francisco’s marine air; the fix is usually a component swap, not a rebuild.
- Spot the failure early with a five-minute check of seals, sashes, and hardware before water reaches the framing.
- We’re an independent San Francisco provider, not affiliated with Mr-Glass, and we source compatible parts by model and measurement.
- Every project we complete is covered by our 730-Day Done Right Promise.
Which Mr-Glass Models This Applies To
Mr-Glass produced several series lines of glazed door and window systems over the years, and the part that fits one line often won’t fit another. The fastest way to identify yours is to find the manufacturer’s label on the frame edge or the glass spacer – it usually carries a series code and a rough-opening dimension. Write down both. If the label is gone, measure the visible glass width and height to the nearest 1/16 inch and note the hinge or roller configuration on doors.
The OEM-versus-aftermarket call is where owners get stuck. An original Mr-Glass part carries an exact fit but often a long lead time and a premium. A quality aftermarket equivalent – matched on dimension, glazing spec, and hardware pattern – can deliver the same performance for less, provided it’s rated for the marine exposure. For additions and ADUs, that rating matters: San Francisco sits in a coastal fog zone where salt-laden moisture attacks seals and hardware faster than inland markets. We confirm the series, verify the glazing and finish spec against the exposure, and only then quote. No part is ordered blind.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
Most San Francisco owners call us after they’ve watched a problem worsen over a wet season. These are the symptoms that point to a specific failing component.
- Fogging or condensation between the panes. The sealed glazing unit has lost its argon fill and moisture barrier – a common outcome after years of thermal cycling in coastal air. Left alone, the seal keeps degrading and the view keeps clouding.
- Water tracking at the sill or threshold. Failed flashing, a clogged weep channel, or a compressed weather seal lets fog-belt moisture reach the framing. This is the one to act on fast, because wet framing leads to rot and mold.
- A sash or door that won’t seat or latch. Settled hardware, a worn hinge, or a roller that’s dropped means the unit is no longer square in its opening. The gap lets air and water in.
- Drafts or a cold spot along the frame. Weatherstripping and gaskets harden and crack in the marine climate, breaking the seal even on a unit that otherwise looks fine.
- Visible corrosion on hardware or tracks. Salt air eats through cheap finishes and even some coated metals. Pitting and sticking tracks mean the hardware is past its service life.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For San Francisco, plan on the following installed ranges for the pieces that most often fail in a Mr-Glass addition or ADU. These are pulled from our standing local pricing so the numbers you read here match what we quote:
- Window Replacement: $5,310 – $17,700, the most common swap when glazing or seals fail.
- Impact Window Installation: $9,440 – $29,500, for owners upgrading to a higher-performance spec.
- Garage Conversion: $35,400 – $94,400, when the failed unit sits in a converted accessory space.
- ADU Construction: $106,200 – $259,600, full scope for a new or rebuilt accessory dwelling.
- Home Addition: $53,100 – $153,400, whole-addition framing-to-finish work.
What drives the range on a parts swap: the size and count of the units, the glazing spec you choose, the condition of the surrounding flashing and framing, and whether the opening needs reframing to accept the replacement. We quote parts and labor as separate line items so you see exactly what the material costs and what the install costs – upfront pricing, no surprises. Every job is backed by our 730-Day Done Right Promise, and if it’s not done right, we make it right.
DIY or Call Us?
You can safely do a few things yourself: measure the opening, photograph the model label, clear debris from a weep channel, and note where water or air is getting in. That information helps us quote accurately. What we’d steer you away from is pulling a sealed glazing unit, resetting a door that’s out of square, or re-flashing an opening on your own. Those go wrong quietly – a bad re-flash leaks for months before you see it, and by then the framing and insulation are wet. On a San Francisco addition or ADU, water intrusion is the expensive mistake. For anything beyond a visual check, call us at (866) 320-2646 to schedule a free estimate.
FAQs
A sealed glazing unit on a coastal San Francisco wall realistically lasts anywhere from 10 to 20 years before moisture starts working past the seal, and hardware finishes often give out earlier under salt air exposure. Inland and bay-sheltered neighborhoods get more time than a fog-belt wall facing the ocean. If your unit is past that window and you’re seeing fog or drafts, it’s worth a look before the wet season. Call (866) 320-2646 for an exact quote – estimates are free.
Sometimes yes, sometimes no. A single failed gasket, weather seal, or piece of hardwar is a repair; a unit that’s lost its glazing seal or gone out of square generally needs the whole component swapped. We’ll tell you which one you’re facing after we inspect it, rather than selling a replacement you don’t need. Call (866) 320-2646 and we’ll schedule a free assessment.
A straightforward single-unit replacement usually wraps within a day once the part is on site, while a multi-unit swap, a reframe, or any work tied to an addition or conversion runs longer and gets scheduled in phases. We give you the timeline in the written quote, not on the fly. Call (866) 320-2646 to schedule your free estimate.
We identify your Mr-Glass series from the frame label or a set of measurements, confirm the glazing and finish spec against San Francisco’s marine exposure, then order the matched part from a verified supplier. No part is ordered until the fit and exposure rating are confirmed, so you’re not paying for a return. We also service KraftMaid, Cambria, and Silestone in the same homes when the project extends into the kitchen or bath. Call (866) 320-2646 to get started.
When a Mr-Glass addition or ADU component starts to fail in San Francisco, the goal is simple: catch it early, match the right part, and install it so the fix holds through the next wet season. We quote parts and labor line by line, back the work with our 730-Day Done Right Promise, and answer the phone with a live person 24/7. Our technicians bring up to 12 years of experience to every job, and we offer $1,000 off projects over $10,000 with 0% financing for 18 months. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.