Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The San Francisco Owner’s Guide
Full Mr-Glass kitchen remodeling in San Francisco typically runs $16,520 to $53,100 installed, covering cabinetry, countertops, and the finish detail that ties the room together. Smaller scopes like a cabinet refresh with new top and backsplash land in the $10,620 to $23,600 range. Most of this work is planned, not emergency, so we schedule it around your calendar rather than promising it by tonight.
Owners rarely call us because a single part “broke.” They call because something has been quietly failing for months. A drawer face that won’t sit flush. A cabinet door that drifts open on its own. A laminate edge curling off the countertop near the sink. In San Francisco’s fog-belt flats, the first sign is often swelling along the bottom rail of a base cabinet where moisture settled in over a winter. The part is usually secondary. What you’re really pricing is the fix that stops the cause.
Key Takeaways
- Mr-Glass kitchen systems mix cabinet, door, and hardware components that aren’t interchangeable across model lines. Matching the right spec matters more than matching the brand name.
- Installed kitchen remodeling in San Francisco sits at $16,520-$53,100, with repair-level part swaps well below that.
- A 730-Day Done Right Promise covers our workmanship on every job.
Which Mr-Glass Models This Applies To
Mr-Glass kitchen products span several lines: ready-to-assemble cabinet systems sold through home centers, semi-custom door and drawer fronts, and replacement hardware kits. We’re an independent service provider and are not affiliated with Mr-Glass, so our job is diagnosis and matching, not brand representation.
The model number matters more than anything else. It’s usually stamped on the inside face of a cabinet door or on a sticker behind a drawer box, and it encodes door style, box size, and hinge pattern in one string. Owners often photograph the visible part and skip the label. That causes the most common compatibility failure we see: ordering a hinge that fits the cabinet but not the door’s bore spacing, so it hangs a sixteenth of an inch proud. Measure twice. A mismatch on paper is cheaper than a mismatch on install day.
On the OEM-versus-aftermarket question: Mr-Glass replacement hardware from the manufacturer is the safest match for a warranty claim on a functioning system. For an older kitchen being partially refreshed, a quality aftermarket equivalent in the same bore and cup size often performs identically and costs less. The decision hinges on how much of the system you’re keeping.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
These are the symptoms our technicians hear most often on San Francisco kitchen calls, with the cause behind each:
- Doors that won’t stay closed. The tension or spring in the hinge has weakened, usually after years of daily opening. It’s a hinge failure, not a door problem.
- Drawers that stick or grind. Undermount or side-mount slides wear at the roller, or the box swells from moisture. Grinding means bearing wear; sticking usually means humidity.
- Curling laminate or peeling edge banding. Adhesive gives out near heat (dishwasher, range) or water (sink). This reads as a finish failure but signals moisture getting into the substrate.
- Swelling at the base rail near the sink or dishwasher. Particleboard and MDF soak up San Francisco’s fog-season humidity and lose structural integrity from the bottom up.
- Cabinet doors that sag out of square. The mounting screw holes in the frame have stripped, or the hinges have loosened over years of swinging.
Replacement Cost & What’s Included
Installed pricing in San Francisco for Mr-Glass kitchen work, with the range reflecting material grade and scope:
| Scope of Work | Installed Range |
|---|---|
| Full kitchen remodel | $16,520-$53,100 |
| Small kitchen remodel | $10,620-$23,600 |
| Cabinet installation | $4,720-$15,340 |
| Countertop installation | $2,360-$7,670 |
| Backsplash installation | $945-$2,950 |
| Kitchen island installation | $3,540-$11,800 |
What drives the range: box construction (particleboard vs. plywood), door front material and finish, whether plumbing or electrical needs relocating, and countertop choice. We also work with KraftMaid, Cambria, and Silestone when a Mr-Glass part isn’t the right fit for the rest of the kitchen. Our pricing is upfront. The number you see is the number you pay, and every job is backed by our 730-Day Done Right Promise. No change orders buried in fine print.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do three things yourself: photograph and transcribe the model number from inside a cabinet door, measure the bore spacing on a hinge with a tape, and check whether a drawer slide is the under-mount or side-mount type. Those are the facts we need to quote you accurately.
Where DIY goes wrong: attempting to rehang a door with a mismatched hinge ruins the bore hole and the door; cutting out a swollen base cabinet section can expose hidden plumbing or electrical running through it; and any scope that touches an electrical outlet, a dishwasher hookup, or a gas range is work for a licensed pro. Do those three checks, then call us. We’ll price the part and the labor honestly.
FAQs
Cabinet hardware (hinges, slides) typically lasts 8-12 years under daily use, cabinet boxes 15-20+ years with good moisture control, and finish surfaces like laminate 10-15 years. In San Francisco’s fog seasons, moisture-driven failures shorten those numbers on base cabinets near sinks. Call (866) 320-2646 to price a replacement against a repair.
Sometimes. A weak hinge is a straight swap, an out-of-square door can often be re-hung, and a stripped screw hole can be reanchored. Repairs usually win when the cabinet box is sound and the failure is hardware-only. Once the box itself has swelled, replacement is the better long-term answer.
A hardware swap on a set of kitchen cabinets takes 2-4 hours. A door or drawer front replacement takes an afternoon. Anything touching plumbing, electrical, or full cabinet removal gets planned over multiple days. We don’t promise same-day on a remodel; a kitchen is a multi-day job and we schedule it that way.
By model number first. You give us the label from inside the cabinet door, we confirm the exact hinge bore, box size, and door style against that string, then source the OEM part or a matching aftermarket equivalent. We don’t stock parts on a truck. Every part qualifies and matches before we order it.
Serving San Francisco
Groundwork Construction Co. of San Francisco works throughout the city: Noe Valley, the Mission, Richmond and Sunset District, Marina, Pacific Heights, Bernal Heights, and beyond. Our technicians have up to 12 years of experience. Live person, 24/7 on the phone. Background-checked, uniformed technicians on every job.
Call (866) 320-2646 to schedule your free estimate. We’ll ask for your model number and a few photos, then hand you a written line-item quote with no surprises. From foundation to finish line.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.