A Groundwork company - serving San Francisco, CA
M

Mr-Glass Windows & Doors in San Francisco, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Windows & Doors: The San Francisco Owner’s Guide

We install Mr-Glass-compatible windows and doors across San Francisco, and a full window replacement typically runs $5,310 – $17,700, with impact-rated units at $9,440 – $29,500. Most jobs are completed in a single visit once the right unit and hardware are on site. Owners usually discover the problem the same way: a sash that won’t stay up, a door that drags on the threshold, fog between the panes, or a lock that no longer catches. In San Francisco’s salt-laden air and earthquake-shifted frames, those small failures tend to show up first on the fog line and at the hinges.

Call (866) 320-2646

Groundwork Construction Co. of San Francisco is an independent service provider. We’re not affiliated with Mr-Glass, and we don’t manufacture their products. What we do is match the right part to your specific unit, quote it upfront, and stand behind the installation with our 730-Day Done Right Promise.

Key Takeaways

  • A failing window or door in San Francisco usually traces to one worn component, not the whole unit.
  • Measure the glass visible area and the frame, not just the rough opening, before ordering anything.
  • Fogged dual-pane glass is a sealed-unit failure; no amount of cleaning fixes it.
  • We price parts and labor separately so you see exactly what you’re paying for.
  • Calls reach a live person 24/7 at (866) 320-2646.

Which Mr-Glass Models This Applies To

Mr-Glass builds a range of aluminum and vinyl window and door lines, and the part you need depends entirely on which series you have. The single biggest compatibility gotcha: two windows that look identical from inside the house can take different balance assemblies, hinges, or glass packs, because the manufacturer changed the extrusion profile between production runs. The model and series are stamped on a label usually tucked in the head jamb or the top channel of the sash. If the label is gone, measure the visible glass area (the actual glass, not the frame), the frame depth, and the overall unit height, and photograph the hinge or balance style. Those four data points will match the part even when the label won’t.

On the OEM-versus-aftermarket call for Mr-Glass specifically, the honest answer is: use OEM glass packs and sealed units when you can get them, because the spacer and glazing geometry are built for that frame. For hardware like locks, rollers, and weatherstrip, a quality aftermarket equivalent often outlasts the original. Our technicians have up to 12 years of experience matching these parts, and we’ll tell you plainly which is the better buy for your unit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Windows & Doors Is Failing

Here’s what a failing Mr-Glass window or door actually looks like, and what’s causing it underneath:

  • Fog or condensation between the panes. The sealed glass unit has lost its seal and moisture has gotten in. No cleaner or reseal kit fixes this; the insulated glass unit has to be replaced.
  • The sash won’t stay up, or slams down. A worn or broken balance spring is the culprit. This is the most common failure we see, and it gets worse fast once it starts.
  • The door drags or sticks at the bottom corner. Hinge wear, a sagging frame, or San Francisco’s older housing settling. Left alone, it grinds the threshold and strains the closer.
  • The lock or latch no longer catches. The multi-point hardware has drifted out of alignment, or the keeper has worn. On a ground-floor unit, that’s a security gap, not just an annoyance.
  • Drafts or water at the perimeter. Failed weatherstrip, or the frame has pulled slightly from the opening. In the Bay Area’s wind-driven rain, that shows up as a wet sill long before you see a leak.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In San Francisco, a full Mr-Glass-compatible window replacement runs $5,310 – $17,700 installed, and impact-rated units run $9,440 – $29,500. What pushes you toward the top of that range: larger or custom-size units, impact glazing, second- or third-story access on a narrow-lot Victorian, and any frame repair once we open the opening. What keeps it low: a standard-size unit on an accessible ground floor with sound framing. We price parts and labor as separate line items so you can see exactly where the money goes, and we confirm the number before anyone touches the wall.

Every install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. No-hassle upfront pricing, no surprises, and 0% financing for 18 months if you’re bundling a larger project. Call (866) 320-2646 for a free estimate.

DIY or Call Us?

Some things you can safely check yourself. Confirm the model label, measure the glass and frame, note the hinge or balance type, and test whether the sash moves freely. That homework helps us match the part on the first call.

Where DIY goes wrong: replacing a sealed glass unit or a sash requires controlled disassembly of a heavy, sometimes tempered or impact-rated unit, and a mis-seated pane or sprung balance can injure you or damage the frame. On a second-story San Francisco window, height and ladder work add real risk. Don’t force a stuck sash or pry a sealed unit to “fix” the fog; that’s a replacement, not a repair.

If you’re unsure which Mr-Glass unit you have or how the part comes out, that’s the moment to call. Reach us at (866) 320-2646 and we’ll sort it out.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch