Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction, repair, and installation service in San Francisco. Mr-Glass is a specialty glass and glazing fabricator, and its line centers on frameless shower enclosures, mirrored and glass wardrobe doors, glass railing systems, and insulated window and sliding-door units. That changes the trade. The crews who install and service Mr-Glass products work to glazier tolerances, not general-carpentry tolerances, and the difference shows up in how a panel is templated, set, and sealed. We route San Francisco homeowners to independent local pros who handle Mr-Glass products regularly, so the glass gets measured, templated, and sealed correctly the first time.
Groundwork Construction Co. of San Francisco is an independent Mr-Glass service provider. We are not affiliated with, certified by, or authorized by Mr-Glass, and we say so plainly. Call (866) 320-2646 to talk through your enclosure, railing, or glazing project.
Why Trust Groundwork Construction Co. of San Francisco for Your Mr-Glass Construction?
Mr-Glass work rewards people who already know the hardware. Our technicians have up to 12 years of experience, and the independent local pros we route Mr-Glass work to handle the brand’s enclosure line and railing systems often enough to recognize a worn pivot or a failed wall channel before the homeowner does. They know the difference between a 3/8-inch and a 1/2-inch tempered panel, how a Neo-Angle entry sets into a corner, and why a mirrored wardrobe door that jumps the track usually needs a new roller rather than a new door.
Parts sourcing follows the job. We specify OEM-compatible hinges, pivots, sweeps, seals, and handle hardware for Mr-Glass enclosures, and the reason is mechanical rather than brand loyalty. The tempered panels are custom-cut and the OEM parts match the original hole spacing. Aftermarket hardware often means re-drilling glass, and re-drilling voids the panel.
Warranty-safe practice ties the whole thing together. Every project we handle is covered by our 730-Day Done Right Promise. If something isn’t done right, we make it right. That commitment runs two years past most handshake warranties, and it’s written, not spoken.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in San Francisco
Glass failures look alike from a distance and aren’t. Here’s what we actually see on Mr-Glass products in San Francisco, and why the problems start.
- Hinge-side sag on frameless hinged and pivot enclosures. A 3/8-inch or 1/2-inch tempered door is heavy, and it hangs off two or three points of hardware. When the wall behind it was never checked for plumb, the door slowly drops out of plane, drags on the fixed panel, and eventually clips the jamb. The pivots aren’t always at fault. The wall often is.
- Failed silicone and sweep seals at the curb and wall channel. Water tracks under the glass, and by the time the leak is visible, the adjacent drywall or subfloor has been soaking for months. In San Francisco’s damp, fog-driven climate, that trapped moisture turns into rot faster than most homeowners expect.
- Edge chips and spontaneous breakage from point-loading. Tempered glass is strong across its face and weak at the edge. Tight setting blocks, a missed metal-to-glass contact, or a curb that was never leveled puts a point load on the panel edge. One tap later and the whole panel lets go into the safety-glass crumble, which is exactly how tempered is supposed to fail, but it’s a failure anyway.
- Mineral etching and hard-water haze. Abrasive cleaner, and occasionally a scouring pad on a stubborn soap film, scratch the glass surface permanently. Once it etches, no amount of polishing brings the clarity back. Replacement is the only real fix, and it’s avoidable.
- Fogged or failed insulated glass units on rails and sliders. On Mr-Glass glass railing panels and insulated window units, a fogged or cloudy pane usually means the edge seal has failed and moisture is inside the unit. It’s a seal failure, not a cleaning problem, and the unit has to come out.
Mr-Glass Parts & Our Repair-vs-Replace Approach
OEM versus aftermarket for Mr-Glass enclosures isn’t a philosophy question, it’s a hole-spacing question. We specify OEM hinges, pivots, sweeps, seals, and handle hardware because the original panels were cut and drilled for those parts. An aftermarket hinge that sits even a millimeter off forces a re-drill, and a re-drilled tempered panel is a voided panel. A chipped, cracked, or dimensionally wrong panel is a replacement, full stop. Hinges, seals, sweeps, and rollers are usually a repair. Panels are not.
The honest answer sometimes points at re-templating rather than patching. If the wall isn’t plumb or the curb isn’t level, new hardware on a bad substrate just buys another few years before the same sag returns. We’d rather tell you that up front than sell you a hinge swap that doesn’t hold.
Parts are sourced and ordered per job, matched to your specific Mr-Glass model and panel dimensions. We don’t stock Mr-Glass parts locally. Call (866) 320-2646 and we’ll confirm what your enclosure takes.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We check plumb, level, and square on the wall, curb, and glass opening before touching hardware. On a sagging enclosure, this is where we learn whether the trouble is the pivot or the wall behind it. On insulated units, we confirm the seal is the culprit.
- 2
Repair or install. OEM parts go on for hinge, pivot, and sweep work. For new installs, the panel is templated to the actual opening, setting blocks are set correctly, and the curb and wall channel are sealed with fresh silicone and a new sweep. When tile and a shower floor are part of the project, we lay the curb and pan so the shower drains toward the outlet before the glass goes back on.
- 3
Test. We operate the door through its full swing, check clearances on the fixed panel and jamb, and run water to confirm the seals hold at the curb and wall channel.
- 4
Warranty. Every project we handle is covered by the 730-Day Done Right Promise and a written scope up front. Upfront pricing, no surprises, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in San Francisco
We cover the Mr-Glass line that San Francisco homes actually carry: frameless hinged and pivot shower enclosures in 3/8-inch and 1/2-inch tempered glass, Neo-Angle and corner-entry shower enclosures, mirrored sliding wardrobe and closet doors, glass railing and balustrade panels, and insulated glass units for windows and sliding doors. Alongside the glass work we handle walk-in shower installation and tile and flooring, since an enclosure is only as solid as the curb and pan beneath it.
San Francisco installation adds a wrinkle. On the west side of the city, fog belt and ocean salt corrode standard fasteners and hardware faster than inland specs assume. We spec stainless hardware and galvanized flashing on small jobs as well as large ones, because a shower hinge that rusts out in a few years is a repair call nobody wants to make twice.
We Also Service These Brands
Mr-Glass is a specialty line, and there’s plenty of other glass, tile, and cabinetry in a San Francisco home. We also work with KraftMaid, Cambria, Silestone, and Kohler on kitchen and bath projects. A single reputable contractor who can coordinate the glass, the tile, and the fixtures under one written scope beats three crews pointing at each other when something leaks.
FAQs – Mr-Glass Construction Service in San Francisco
No. We are an independent Mr-Glass service provider. We’re not affiliated with, certified by, or authorized by Mr-Glass. What we bring is familiarity with the product line and experience with the brand’s hardware, installations, and common failure modes, handled by independent local pros.
Yes, we specify OEM hinges, pivots, sweeps, seals, and handle hardware for Mr-Glass enclosures. The tempered panels are custom-cut, so OEM parts match the original hole spacing. Aftermarket hardware often means re-drilling glass, and re-drilling voids the panel. Call (866) 320-2646 to confirm the parts your model takes.
A hinge, pivot, or sweep repair is typically a short single visit. A new frameless enclosure involves templating, fabricating the tempered panels, and installation, so plan on a longer window. Bathroom work that includes tile and curb goes longer still. Call (866) 320-2646 for a free estimate and a realistic timeline for your job.
We cover the Mr-Glass line San Francisco homes actually carry: frameless hinged and pivot shower enclosures in 3/8-inch and 1/2-inch tempered, Neo-Angle and corner-entry enclosures, mirrored sliding wardrobe and closet doors, glass railing and balustrade panels, and insulated glass units for windows and sliding doors. If you’re not sure which model you have, we can identify it from photos.
Proper, warranty-safe service shouldn’t void your Mr-Glass warranty, and we work to warranty-safe practices on every job. The bigger risk is re-drilling a tempered panel with aftermarket parts, which can void the panel itself. Ask for written scope and call (866) 320-2646 so we can walk through your warranty terms before work starts.
Mr-Glass glass work in San Francisco depends on the scope, and the ranges below are what we publish. Every project is quoted in writing with upfront pricing, and the number you see is the number you pay.
| Service | Typical San Francisco Range |
|---|---|
| Frameless Glass Shower Enclosure / Walk-In Shower Installation | $5,310 – $14,160 |
| Shower Replacement | $3,540 – $10,030 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Bathroom Remodel | $10,620 – $33,040 |
| Bathroom Vanity Installation | $945 – $3,540 |
| Tile & Flooring (per project) | $945 – $2,950 |
We offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (866) 320-2646 for an exact quote. Estimates are free.
Usually not the glass. Sag on a Mr-Glass frameless door is most often worn pivots and hinges combined with a wall that was never checked for plumb when the enclosure went in. A sagging door that clips the fixed panel or jamb is a hardware and alignment problem in most cases, and the fix is typically OEM pivot and hinge replacement plus a re-check of plumb and level. Call (866) 320-2646 and we’ll diagnose it.
It can, but not by hanging glass on a bad substrate. With a Mr-Glass enclosure, out-of-plumb walls and uneven curbs have to be corrected or shimmed before the setting blocks and seals go in. Skipping that step is exactly how a door ends up dropping at the hinge side within a few years. A qualified local glazier checks plumb and level first, then templates the panel to the real opening. Call (866) 320-2646 to schedule a free estimate.
The seal, almost always: failed silicone at the curb or wall channel, or a worn sweep that no longer meets the curb. Water tracks under the glass and rots the adjacent drywall or subfloor long before the leak shows. The fix is fresh silicone, a new sweep, and a check that the pan drains toward the outlet. Call (866) 320-2646 for a leak inspection and quote.
OEM replacement parts are available for the enclosure hardware, hinges, pivots, sweeps, seals, and handles. You rarely need a whole new enclosure for hardware wear. Panels are a different matter. A chipped, cracked, or dimensionally wrong panel is a replacement, and OEM replacement panels are cut to match the original hole spacing. Call (866) 320-2646 to find out which applies to your door.
Yes. A fogged or cloudy insulated glass unit is a seal failure, not a cleaning problem. Moisture has gotten inside the unit and the edge seal is gone. Cleaning won’t fix it and neither will polishing. The unit has to be removed and replaced. Call (866) 320-2646 for a free estimate on the replacement.
Book Your Mr-Glass Service in San Francisco, CA
Whether it’s a sagging frameless door, a leaking curb, or a fogged railing panel, Groundwork Construction Co. of San Francisco can route you to an independent local pro who knows the Mr-Glass line. Call (866) 320-2646 for a free estimate. Live person, 24/7. Upfront pricing, a written scope, and our 730-Day Done Right Promise on every project we handle.
Written by the team at Groundwork Construction Co. of San Francisco.