A Groundwork company - serving San Francisco, CA

Oldcastle Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Driveway & Pavers: The San Francisco Owner’s Guide

We install and repair Oldcastle-compatible driveways and paver systems across San Francisco, and most paver driveway projects land between $8,260 and $21,240 depending on square footage, base depth, and whether we’re replacing an existing slab. When a paver driveway starts failing, San Francisco owners usually notice it the same way: a low spot that pools water after a foggy morning, joints that push sand out onto the sidewalk, or a paver that rocks underfoot near the garage apron. On our steep, narrow lots, the failure shows up first at the driveway apron and the curb cut, not in the middle of the field.

Call (866) 320-2646

Which Oldcastle Models This Applies To

Oldcastle’s paver lines are sold under several series names, and matching the right replacement means reading what’s actually on the pallet band or the delivery slip, not guessing from color. The common residential profile in San Francisco is a 60mm or 80mm interlocking concrete paver, often in a tumbled or chamfered edge style. Driveway aprons and any surface taking vehicle loads need 80mm; we regularly find 60mm product used on sloped SF driveways where it was never meant to sit.

Before you order a match, measure a few things: the paver face dimensions (a common one is roughly 4″ x 8″), the thickness, and the joint width with sand in place. Take a photo next to a tape measure. If the original series is discontinued, which happens as manufacturers retire color runs, a quality aftermarket paver in the same thickness and base dimension is a reasonable path as long as the color blend is close. OEM gets you an exact color and bevel match. Aftermarket gets you availability and often a lower cost per square foot, but the joint sand and edge restraint still have to be done right or the new pavers will shift with the old ones. We’re an independent provider and not affiliated with Oldcastle.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Driveway & Pavers Is Failing

  • Pavers rocking or dipping underfoot. This is almost always a base problem, not the paver itself: inadequate compacted aggregate, or water finding its way under the edge. A rocking paver in San Francisco usually means the sub-base has settled or softened.
  • Sand washing out of the joints. Winter rain plus SF’s clay-heavy soils pull joint sand down and out. Once joints open, water gets in fast and the whole field loosens.
  • Efflorescence, the white chalky haze. Common after installation and again in wet seasons. It’s a moisture symptom; persistent blooming suggests water is trapped under the surface.
  • Heaving or a crown in the driveway. Tree roots, a shallow base, or frost-free but waterlogged soil pushing up. On SF slopes this often shows as a ridge running downhill.
  • Edge restraint pulling away. The plastic or concrete edge that holds the field tight has loosened, letting the outer course spread. This is the most common root cause of a whole field coming apart.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In San Francisco, a full repave or replacement runs $8,260 to $21,240 for a paver driveway, while a targeted repair (re-laying a settled section, rebuilding the edge, re-sanding) is a fraction of that. Driveway sealing, when the surface is sound, sits at $295 to $825 and is a maintenance item, not a fix. What drives the top of the range: square footage, how deep we have to dig and re-compact the base, hauling out old concrete or pavers through a narrow SF lot, and whether we rebuild the apron and curb cut.

You get upfront pricing, no surprises: the number we quote is the number you pay, with parts and labor spelled out line by line. And it’s backed in writing by our 730-Day Done Right Promise. If it’s not done right, we make it right.

DIY or Call Us?

You can safely check a few things yourself: tap pavers to hear which are hollow or loose, note where water pools after rain, and pull back a loose edge piece to see if the sand and base look intact. What goes wrong DIY on paver work is the base and compaction. A paver driveway is only as good as the 4 to 6 inches of compacted aggregate under it, and getting that right on a sloped San Francisco lot with plate compactors and proper drainage grading is where most homeowner jobs fail within a season. Re-sanding joints and resetting a single paver is reasonable to try. A rocking field, a failed edge, or water pooling against the garage is when it’s time to call.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch