A Groundwork company - serving San Francisco, CA

Oldcastle Fence Installation in San Francisco, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Fence Installation: The San Francisco Owner’s Guide

Oldcastle fence installation in San Francisco typically runs $4130 – $10620 installed, depending on fence type, linear footage, and site conditions. We install and repair Oldcastle-compatible fencing across the city, and most straightforward residential runs are scheduled within days of your estimate, not weeks. Fence work is planned work, so we don’t promise to be at your door this afternoon, but we do answer the phone with a live person at any hour, seven days a week. Homeowners usually realize something’s wrong when a post starts leaning after a wet winter, a gate drags on the ground, or boards cup and split along the bay-facing side. In San Francisco fog belts, that discovery almost always follows the damp season, not the dry one.

Call (866) 320-2646

Which Oldcastle Models This Applies To

Oldcastle builds residential fence lines under several product families, and the part you need depends on which one is in your yard. The first thing we check isn’t the label, because the label is usually sun-bleached or gone. We measure. Post spacing, board width, rail dimensions, and post cap profile tell us more than any sticker. If you’re trying to identify your own fence before calling, measure the board width and the distance between post centers, then photograph a post base and a rail connection with a tape measure in frame.

Here’s the compatibility gotcha most owners hit: Oldcastle’s vinyl and composite lines use different rail and post geometry, and a rail from one family will not seat properly in a post channel from the other even when the widths look close. Mixing them is the single most common reason a fence repair fails again within a season. We also see aluminum and steel ornamental runs where the bracket style differs between product generations, with older stock using a wider saddle.

On the OEM-versus-aftermarket call, our take for San Francisco fences is this: match the OEM profile for anything structural (posts, rails, post caps), and use a quality aftermarket equivalent for fasteners, hinges, and latches where the spec matches and the finish is rated for coastal moisture. For a fence, that’s most of the cost difference. We’re an independent installer, not affiliated with Oldcastle, so we’re giving you the straight recommendation, not steering you to a catalog.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Fence Installation Is Failing

Vinyl and composite fences don’t fail overnight. They telegraph it. Here’s what we look for on arrival.

  • Leaning posts after rain. Post footings set too shallow or in soil that drains poorly give way with saturation. San Francisco’s sandy fill lots near the Marina behave very differently than the clay-heavy slopes out in the Sunset.
  • Cupping or splitting boards on the ocean-facing side. Sun and fog cycling together stress the material more than either alone. Boards on the west face of a fence go first, every time.
  • Rails pulling out of post channels. This usually traces back to a mismatched rail-and-post combination or fasteners that were never rated for outdoor use. It accelerates fast once a single rail loosens.
  • Gate sag and dragging. Hinge fatigue and post movement together. A gate that drags is telling you the post has shifted, not just that the hinge needs oil.
  • Mildew staining and chalky surfaces. Cosmetic on its own, but it signals the finish is breaking down, which eventually means material degradation rather than dirt. A fence that chalks white on the shaded side is further along than it looks.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a full Oldcastle-compatible fence installation in San Francisco, expect $4130 – $10620 installed. A vinyl run over a short, level yard sits near the bottom of that range; a taller privacy fence, sloped lot, or ornamental aluminum near the top. Here’s how the line items break down:

Item Typical Range
Post setting and footings $520 – $1,240
Rails and structural members $780 – $1,890
Pickets, boards, or infill $1,150 – $3,050
Gate, hardware, and latches $410 – $1,100
Labor and finish $1,270 – $3,340

What drives the range: linear footage, fence height, slope or grade changes, footing depth (San Francisco hills need deeper, wider footings than flat lots), and whether you’re matching an existing Oldcastle run or replacing a full stretch. We give you an upfront, line-item number before work starts. The number you see is the number you pay. Every installation is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.

DIY or Call Us?

There’s real value in a homeowner knowing their own fence. You can safely walk the line, push on posts to feel for movement, check that latches and hinges are tight, and measure your linear footage before you call. That saves everyone time. What we’d steer you away from is trenching and setting footings on a sloped San Francisco lot or a property line with shared fencing between two yards, because a shallow or misaligned footing is what buried the last one. Digging near buried utility lines is the other spot to be careful with, and calling 811 before you break ground is the safe move. If a post is already leaning, the fix is at the footing, not the surface. That’s the part where a trained crew earns its keep. We’re background-checked, we arrive in uniform, and we’ll tell you honestly whether you need a repair or a rebuild. Call (866) 320-2646 and we’ll talk through what you’re seeing.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch