Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Windows & Doors: The San Francisco Owner’s Guide
We install and service Oldcastle-compatible windows and doors throughout San Francisco, and a failed unit usually comes down to one part: a worn window balance, a broken sash lock, or a rotted sill or threshold on the door side. Most single-unit swaps we handle fall in the $5,310 – $17,700 range for window replacement, and impact-rated units run $9,440 – $29,500. When the frame is sound and only the hardware has given out, we can often repair without a full replacement.
Owners rarely notice the part until it fails outright. A sash that won’t stay up, a door that drags or leaks at the bottom corner, or a lock that no longer lines up are the typical first signs. In San Francisco’s salt air and fog belt, that failure often shows up as corrosion long before the glass or frame is compromised.
Which Oldcastle Models This Applies To
Oldcastle builds windows and doors under several product lines, and the exact part depends on which series you have. The quickest way to identify your unit is the label etched on the glass edge or stamped inside the frame jamb – it carries the model series, glass package, and manufacturing code. Write that code down before you call anyone, including us. It’s the difference between a ten-minute part match and a week of guesswork.
On the window side, single-hung and double-hung units typically use a spiral or block-and-tackle balance, and the balance is matched to the sash weight and height of that specific series. Order the wrong balance and the sash will drift or slam. On the door side, threshold and sill parts are sized to the frame depth, and Oldcastle’s depths don’t always line up with generic aftermarket thresholds – a common gotcha in older San Francisco homes where the rough opening was framed decades ago.
When it comes to OEM versus aftermarket for Oldcastle specifically: OEM parts guarantee the original fit and finish, and for anything structural – balances, hinges, multi-point locks – we lean OEM every time. For weatherstripping, sweeps, and cosmetic hardware, a quality aftermarket equivalent does the same job for less. If the match is uncertain, we say so upfront rather than forcing a part that doesn’t belong. We also work with KraftMaid, Cambria, and Silestone on the broader remodel side, but for Oldcastle units this guide is what you want.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Windows & Doors Is Failing
- The sash won’t stay up, or drops on its own. That’s a spent window balance – the spring or spiral mechanism has lost tension. In fog-belt neighborhoods the internal spiral rusts faster than the sash itself.
- A door drags at the bottom or top corner. Usually a failing hinge or a sagging frame pulling the door out of square. Left alone, the drag wears the weatherstripping and lets moisture in.
- Water staining or soft wood at the sill or threshold. The seal has failed and moisture is getting behind the frame. On San Francisco’s windward exposures this can progress from a stain to rot within a couple of seasons.
- The lock or latch no longer lines up. A shifted sash or a worn multi-point mechanism. It’s a security issue as much as a comfort one.
- Drafts, fogging, or a rattling pane. A failed seal in the insulated glass unit, or a loose glazing bead. The glass itself is often fine; the seal around it isn’t.
Replacement Cost & What’s Included
For San Francisco, installed window replacement runs $5,310 – $17,700 depending on unit size, series, and how many openings you’re doing at once. Impact-rated window installation runs $9,440 – $29,500. A single balance or hardware swap is far less than a full replacement; the range above is for replacing the whole unit when the frame or glass has actually failed.
What drives the number: the series and size of the unit, whether the frame is sound enough to reuse, glass package (impact versus standard), and access – a third-floor Victorian opening costs more to reach safely than a ground-floor slider. Every quote we give is a written, upfront price that itemizes parts and labor separately, so you can see exactly what the part costs versus the install. No surprise line items once the work starts.
The number you see is the number you pay, and the work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Larger window projects over $10,000 qualify for $1,000 off, and we offer 0% financing for 18 months. We’re an independent service provider and not affiliated with Oldcastle; we match and install the right parts for your unit.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things an owner can safely check: confirm the model code on the glass label, measure the sash and frame, test whether the problem is the lock, the hinge, or the balance, and look for soft wood or staining at the sill. That’s diagnosis, and it helps you get the right part faster.
A word on safety before you go further. Swapping a window balance or rehanging a heavy door isn’t a weekend YouTube job. Window balances are under real tension – released wrong, they snap and can injure a hand, arm, or face. A sagging entry door is also heavier than it looks and can fall or crush fingers if the hinge gives while you’re holding it. And on upper-floor units in San Francisco, working from a ladder over a steep Victorian facade is how people get hurt. If the part is under tension or you’d be working at height, that’s where a trained technician earns their keep. We’d rather you call than get hurt.
For a part match, an honest price, or a quick answer on whether it’s a repair or a replacement, call (866) 320-2646. A live person answers, 24/7.
FAQs
Window balances and door hardware typically last 10 – 15 years in inland conditions, but shorter on the fog belt and windward exposures near the coast, where salt air and constant moisture accelerate corrosion. If your unit is past that window and the sash or door is misbehaving, the part is the likely culprit. Call (866) 320-2646 and we’ll help you pin down the age and match.
Often, yes – if the frame and glass are sound, a balance, hinge, lock, or threshold swap brings the unit back to working order for a fraction of a full replacement. The deciding factor is whether the frame has rotted or the seal has failed. Call (866) 320-2646 for a free estimate and a straight answer on repair versus replace.
A single hardware or balance replacement usually takes under two hours, and most single-part jobs are completed in a single visit. Full window or door replacement takes longer depending on count and access. We’ll give you a realistic timeline upfront, not a guess. Call (866) 320-2646 to book a free estimate.
We start with the model code from your glass label or jamb stamp, then match the part to your series and sash or frame dimensions. For structural parts we go OEM; for cosmetic ones we’ll quote a quality equivalent and explain the difference. Call (866) 320-2646, and have that code ready – it speeds everything up.
Get Your Oldcastle Part Matched and Installed
Send us the model code from your Oldcastle unit or call with it in hand, and we’ll tell you what part you need, whether it’s a repair or a replacement, and what it costs – upfront, no surprises. Calls are answered by a live person 24/7, and every technician who comes to your door is background-checked and in uniform. Call (866) 320-2646 to schedule your free estimate and put your windows and doors back in working order, backed in writing.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.