Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Driveway & Pavers: The San Francisco Owner’s Guide
If your Owens Corning driveway or paver system has started failing, we’re the team to call. We provide Owens Corning-compatible driveway and paver installation across San Francisco, with paver driveway projects typically running $8,260 – $21,240 installed and most jobs completed in a single visit for standard driveways. Faults almost never show up as a sudden event. Homeowners usually find them after a wet winter, when a paver course begins to shift and pool water, or when a driveway section starts settling toward the garage slab. The cause is rarely the paver itself. It’s the failing base, the joint sand, or the drainage at the edge that gives way first.
We’re an independent provider. We’re not affiliated with Owens Corning, though we know their paving systems well and have installed, repaired, and replaced them across San Francisco’s misty, wet winters and fog-driven moisture.
Which Owens Corning Models This Applies To
Owens Corning doesn’t make one driveway paver. Their paving systems include several paver lines and profiles, so the first job is confirming which product is on your driveway. You can usually identify it from the stamp on the face or edge of an existing paver, from the original installation invoice, or from a single intact paver you keep as a sample for a color or shape match.
There’s a compatibility gotcha here. Some Owens Corning paver profiles look nearly identical across lines but differ in thickness and edge profile by a quarter inch or more. Force a mismatched profile into an existing run and the bed depth gets thrown off, causing settlement or surface lippage within one wet season. That’s why we always confirm the exact line and thickness before ordering.
When it comes to OEM vs. aftermarket, we’ll be straight with you. An OEM replacement paver in the identical color and profile is the cleanest match for a partial repair. But if you’re replacing a whole driveway or a large section, a quality aftermarket paver set to a standard thickness often performs just as well, sometimes better on frost and moisture resistance, and it costs less. We’ll walk you through the difference, show you samples, and let you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Driveway & Pavers Is Failing
- Heaves, dips, and uneven sections. This usually means the compacted base underneath has settled or lost support, often from water movement beneath the pavers rather than a defect in the pavers themselves.
- Water pooling and poor drainage. When shallow pooling appears after rain, the slope or edge drainage has shifted. In San Francisco’s wet winters, that water works its way deeper into the base and destabilizes it.
- Joint sand washing out. Loss of joint sand is often the first sign. Water gets between pavers and loosens the interlock, which sets up movement down the line.
- Surface chips and cracks. Impact damage from vehicles or dropped loads is common, and if the base is already unstable, a chipped paver worsens quickly under weight.
- Loose or rocking pavers. Individual pavers that lift or rock signal localized failure of the base under that section. Left alone, it spreads to neighboring pavers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For San Francisco, our installed paver driveway work runs $8,260 – $21,240, and a concrete driveway installation is $5,310 – $14,160. Driveway replacement starts at $5,900 – $16,520, driveway sealing is $295 – $825, and paver patio installation is $4,130 – $12,980. The range depends on square footage, existing base condition, excavation required, and whether drainage or edge restraints need rebuilding. That last point is what moves the number most: a paver swap over a sound base sits at the low end, while a full tear-out and base rebuild sits at the top.
You get a written line-item quote before anything starts, so the number you see is the number you pay. Every project carries our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
We’re not going to pretend every paver job is beyond a homeowner. If you have a single loose or chipped paver, re-setting one with proper base prep and fresh joint sand is a reasonable weekend project if you enjoy that kind of work. The trouble starts on base repair, slope correction, and full or partial replacements. That’s where a weekend project turns into a driveway that pools water every winter, or pavers that start rocking within a season because the base wasn’t compacted to depth.
If the driveway is settling, angled wrong, or failing across more than a few pavers, have it looked at properly. Call (866) 320-2646, and a real person picks up any hour of the day to talk through what you’re seeing.
FAQs
With a properly compacted base and good joint sand maintenance, a quality paver driveway typically lasts 25 – 30 years in the Bay Area climate. The paver itself can outlast the installation by a wide margin, but San Francisco’s wet winters stress the base. Re-sanding joints every few years and fixing any drainage issue early is what keeps the whole system going for the long haul.
Yes, in many cases. Localized repairs for a handful of loose, chipped, or displaced pavers are common and cheaper than a full replacement. If the base is sound and only a small section has failed, we can match and reset it. If water pooling or widespread settlement means the base itself is compromised, a full replacement is the real fix. Call (866) 320-2646 and we’ll look at it and tell you which is which.
Most standard paver driveway jobs are completed in a single visit, while a full tear-out and base rebuild can take two to three days depending on square footage and excavation. Smaller repairs for a handful of pavers are usually done in a few hours. We’ll give you a clear timeline before work starts.
We start by identifying the exact paver line, color, and thickness from a stamp, your original invoice, or a sample paver, then source the matching product. If an exact OEM match isn’t available, we’ll show you quality aftermarket options set to a compatible thickness and profile and explain how they perform. Call (866) 320-2646 for a free estimate, and we’ll confirm the best match for your driveway.
When your Owens Corning driveway needs attention, you don’t have to guess at the fix or the price. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free project estimate and design consult. We’ll show up in uniform, walk the driveway with you, and put an upfront price in writing before any work begins. We also work with KraftMaid, Cambria, and Silestone across other parts of the home if you’re planning more than the driveway.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.