Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Home Additions & ADU: The San Francisco Owner’s Guide
A home addition or ADU built with Owens Corning roofing, insulation and sheathing systems in San Francisco typically runs $53,100 – $153,400 for an addition and $106,200 – $259,600 for a full ADU, and the price depends mostly on foundation condition, structural scope and permitting. When people land on this page, they usually aren’t shopping for a part. They’re standing in a finished addition or a half-converted garage, looking at a stained ceiling, a cold room that never heats right, or shingles lifting at the tie-in where the new roofline meets the old one. That’s the moment the Owens Corning system behind the build gets interesting. Groundwork Construction Co. of San Francisco is an independent contractor, not affiliated with Owens Corning, and we build, diagnose and correct these assemblies across the city.
Which Owens Corning Models This Applies To
Owens Corning doesn’t sell “home additions” as a single product. What applies to your project is the component layer: Duration and Oakridge shingle lines on the addition roof, PINK Fiberglas and FOAMULAR insulation in the new walls, and ThermaSheath or similar sheathing under the siding. Each has spec ranges that matter in San Francisco’s fog belt. Duration shingles carry a Class A fire rating and wind ratings up to 130 mph; Oakridge sits a tier below on wind uplift. If a roofer mixed lines at the tie-in, the shingle profile won’t match across the dormer and the visual seam tells you.
Identify the right part by reading the bundle wrapper (the shingle line and color are printed on the end label), the R-value stamp on the insulation face, and the printed thickness on the sheathing panel edge. The OEM-versus-aftermarket question is real here: the shingle itself should be Owens Corning to keep the manufacturer warranty intact on an addition under 10 years old, while fasteners, drip edge and underlayment can safely come from equivalent brands. Never substitute a different shingle line inside an Owens Corning system you’re trying to keep warranted.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Home Additions & ADU Is Failing
San Francisco’s marine layer pushes moisture sideways and sits on low-slope additions for weeks. The failures we see reflect that.
- Brown rings on the new addition’s ceiling. Usually failed step flashing at the tie-in, not the shingle itself. The shingle sheds water fine; the junction drains it into the wall cavity.
- A room that won’t hold heat. Compressed or missing Owens Corning batts behind the finished wall, common when insulation was crammed around new framing without a full friction-fit. Check the R-value match to the permit drawings.
- Shingles lifting or creasing along one edge. Nail placement or high-nailing on the addition roof deck, which voids the wind warranty regardless of shingle line.
- Granules collecting in the gutter within a few years. On an addition finished improperly, this points to a manufacturer defect or an installation that trapped moisture under the mat.
- Condensation on the inside face of exterior sheathing. A vapor barrier or venting problem in the new assembly; Owens Corning FOAMULAR is often misapplied as a vapor retarder when it isn’t one in this climate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Owens Corning-attributed failures on a San Francisco addition or ADU rarely cost what a full rebuild does. Here’s what corrective work runs, installed:
| Scope | Installed range |
|---|---|
| Step-flashing and tie-in repair (addition roof) | $470 – $2,125 |
| Shingle section replacement, Owens Corning Duration | $2,125 – $9,440 |
| Insulation correction behind finished wall | $1,200 – $5,300 |
| Full home addition, Owens Corning system | $53,100 – $153,400 |
| ADU construction, Owens Corning system | $106,200 – $259,600 |
| Garage conversion to ADU | $35,400 – $94,400 |
The range for a full addition is driven by foundation type, structural engineering, and whether the existing roofline accepts a clean tie-in. We provide a written line-item quote with parts and labor separated, so you see the Owens Corning material cost against the installation cost. Upfront pricing, no surprises. All work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
DIY or Call Us?
Some checks are safe. You can read the bundle label on a leftover shingle, measure the R-value stamp on visible insulation, and photograph the flashing at a tie-in from the ground with a zoom lens. What we don’t recommend: climbing onto a low-slope addition roof in San Francisco fog, prying up shingles to inspect the underlayment, or cutting into a finished wall to inspect insulation. Roof work at height is a serious fall risk, and once you disturb a shingled roof, the manufacturer warranty on that section is voided and the leak risk goes up, not down. If your addition is under 10 years old and the failure looks systemic, call (866) 320-2646 and we’ll scope it. Estimates are free, and a live person answers around the clock.
FAQs
Duration shingles are rated 25-30 years under normal conditions; in San Francisco’s cool, wet microclimate with less UV than inland California, the shingle lasts longer but the flashing and underlayment don’t. We tell owners to budget for a flashing inspection at year 10-12, because the shingle outlives the junction it sits on. Call (866) 320-2646 for an inspection quote.
Yes, most tie-in and flashing failures are repaired in a single section, and a properly matched shingle line means the repair is nearly invisible. If the shingles themselves are sound and it’s the flashing, repair is far cheaper than a rebuild. We’ll tell you honestly which one you have before you spend a dollar.
Flashing and section repairs usually finish in a single visit; insulation correction behind a finished wall takes one to two days once the wall is opened. Full additions and ADUs run weeks depending on permits, and we don’t promise same-day work on planned builds because nobody builds an ADU in a day.
We match the exact shingle line, color and R-value from your existing label and order through verified Owens Corning distribution, so your warranty stays intact. Groundwork doesn’t quote a price for a part before we’ve confirmed the label, because a wrong-line substitution costs more to fix than the part ever did.
Other brand partners we work with across the build include KraftMaid, Cambria and Silestone. From foundation to finish line, one contractor handles your addition or ADU, backed in writing. Call (866) 320-2646 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.