Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Roofing: The San Francisco Owner’s Guide
We install Plant Prefab-compatible roofing in San Francisco, and a full roof replacement typically runs $9,440 – $23,600 installed, while targeted repairs usually land between $470 and $2,125. Most owners don’t discover a roofing problem by climbing a ladder. They notice a brown ring spreading across a bedroom ceiling after the first big rain of the season, or they find granules collecting in the gutter downspout, or a neighbor mentions the sagging line along the ridge that wasn’t there last winter. By the time water shows up inside, the failure has usually been working on the roof for a while.
Which Plant Prefab Models This Applies To
Plant Prefab builds modular and panelized homes across several product lines, and the roofing assembly is specified per project rather than pulled from a single catalog. That means the right part depends on your home’s construction documents, not just the model name on your paperwork. Before we order anything, we confirm three things: the roof pitch, the underlayment specification, and the panel seam layout shown on the original drawings.
Identifying the correct replacement starts with the project documents the homeowner received at delivery. Look for the roofing schedule and the panel shop drawings, which list the membrane or shingle type, the fastener pattern, and the flashing details at penetrations. If those documents are missing, we measure the existing assembly directly: panel width, batten spacing, and the profile of the ridge and eave trim.
On the OEM-versus-aftermarket question, this is where Plant Prefab roofs differ from a site-built home. Plant Prefab’s factory-assembled roof panels are engineered to specific tolerances, and a generic shingle or membrane that’s close but not exact can create flashing gaps at the module seams, which is where San Francisco fog and wind-driven rain do the most damage. A quality aftermarket equivalent is often the right call for a repair, but only when the spec matches. We’re an independent service provider and not affiliated with Plant Prefab, so we source to the specification rather than to a brand label.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Roofing Is Failing
Roof problems on a modular home often announce themselves in the same handful of ways. Here’s what to watch for and what’s usually behind it.
- Water stains on ceilings or walls after rain. This usually traces to a failed flashing detail at a panel seam, vent, or chimney, not to the field shingles. Modular roofs have more seams than site-built ones, and seams are where water gets in first.
- Granules in gutters or at downspout outlets. Shingle granules shedding in volume means the asphalt mat is aging out. In San Francisco’s salt air and fog cycle, an aging shingle surface breaks down faster than the manufacturer’s headline lifespan suggests.
- Curling, lifting, or missing shingles along the ridge. High wind exposure on exposed hillside lots, common in neighborhoods like Noe Valley and Bernal Heights, lifts shingle tabs at the ridge and eave before anywhere else.
- Sagging along panel joints. A dip or soft spot at a module seam points to compromised sheathing or a fastener backing out. Left alone, it lets water pool and rot the deck below.
- Daylight or draft at a ceiling joint after heavy weather. Small gaps at roof-to-wall connections open up as sealant ages, and that’s an entry point for both water and cold air.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing on a Plant Prefab roof depends on the assembly, the square footage, and how much of the flashing and trim has to be rebuilt versus reused. Here’s what San Francisco homeowners can expect for installed work.
- Roof repair (flashing, seams, local damage): $470 – $2,125
- Full roof replacement: $9,440 – $23,600
- Metal roof installation (where the spec calls for it): $17,700 – $47,200
The low end of each range covers straightforward swaps with intact decking. The high end reflects larger roofs, tear-off and disposal, new underlayment, and rebuilt flashing at module seams. We quote parts and labor as separate line items so you can see exactly what you’re paying for. Every roof we install is backed by our 730-Day Done Right Promise, and the workmanship guarantee runs alongside whatever material warranty the product carries.
DIY or Call Us?
There’s a safe middle ground here, and we’d rather you stay on it. You can walk the perimeter with binoculars, check your ceiling and attic space for stains after a storm, clear debris from gutters, and photograph anything that looks off. Those checks won’t hurt you and they help us quote accurately.
What you shouldn’t do is climb onto a wet or steep roof to patch a seam yourself. Roof work on a modular home involves height, and a fall from a two-story San Francisco roof is serious. Beyond the danger, DIY patching at a panel seam almost always misses the actual failure point, which is usually the flashing beneath the shingle, not the shingle itself. A patch that looks fine from the ground can trap moisture and rot the decking under it. Our technicians have up to 12 years of experience with assemblies like these, and they’re background-checked and arrive in uniform. Call (866) 320-2646 and we’ll schedule a free estimate and tell you honestly whether you need a repair or a replacement.
FAQs
Most modular roof assemblies in the Bay Area give 20 to 30 years with proper maintenance, though San Francisco’s fog, salt air, and wind exposure can shorten that on older or under-maintained roofs. The panels themselves hold up well. The failure point is almost always flashing and sealant at the seams, which ages faster than the field shingles.
Yes, often. Localized failures at seams, flashing, or a few shingles can be repaired for $470 – $2,125 and don’t require a full tear-off. We only recommend replacement when the shingle mat itself is failing across the roof or the decking shows rot. Call (866) 320-2646 for an honest assessment of which side of that line you’re on.
A typical single-family roof replacement takes two to four days depending on square footage and how much flashing needs rebuilding at the module seams. Because this is a planned replacement rather than an emergency, we schedule it properly rather than rushing it. Your written quote will include the timeline up front.
We start with your original construction documents and match the underlayment, shingles, and flashing specs to your panel layout. When the documents aren’t available, we measure the existing assembly directly and confirm compatibility before ordering. We don’t carry parts on a truck or keep local stock; every product is spec-matched to your home and delivered for your job. Call (866) 320-2646 for a free estimate.
Ready to stop guessing? Call (866) 320-2646 for a free estimate and a straight answer on your Plant Prefab roof. We also serve homeowners across other trades and brands, including KraftMaid, Cambria, and Silestone.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.