Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Driveway & Pavers: The San Francisco Owner’s Guide
Quikrete driveway and paver work in San Francisco runs about $8,260 to $21,240 for a paver driveway installed, and $5,310 to $14,160 for a concrete pour, with most jobs scheduled within a few weeks of your estimate rather than months. Quikrete itself is a material brand, not a machine, so what fails on your property is one of its systems at work: the hardened surface, the joint sand, the base course, or the edge restraint holding the whole thing together.
Owners in San Francisco usually notice it the same way. A hairline crack spreads across the apron at the garage door. A single paver by the gate rocks when you step on it. The sand between the joints washes out after the first real winter rain. Or a low corner of the slab has started to pond, which in our climate is the clearest sign water is getting under the surface and not back out.
Which Quikrete Products This Applies To
Quikrete covers a lot of ground, so the first job is figuring out what you actually have. Matching the right material comes down to reading the print, not the color. Concrete mixes carry a number on the bag, and that number tells you the strength. Quikrete Concrete Mix is the standard 4000 PSI blend, while the higher-load products like the 5000 and 6000 mixes are what we reach for on driveways that see a heavy vehicle. Paver joint sand is a separate product line entirely, and polymeric sand behaves very differently from regular joint sand when it gets wet.
The gotcha most homeowners miss: a bag labeled “driveway” at the home center is often a repair product, not a structural mix. It’s fine for patching a spall, and wrong for pouring a new apron that has to carry a car every day. The other thing to check is the date and the way the bag feels. Slumped, hard lumps mean moisture got in, and that mix won’t cure the way the label promises.
Where you can go OEM versus an equivalent, the honest answer for Quikrete is this: the mix is the mix. There’s no proprietary drive unit or control board here. What varies is the installer’s judgment about which product is right for your subgrade and drainage, and that judgment is worth more than the brand on the bag.
We’re an independent service provider. Groundwork Construction Co. of San Francisco is not affiliated with Quikrete, and we install and repair work built with Quikrete materials and comparable lines without claiming any partnership.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Driveway & Pavers Is Failing
- Joint sand washing out after rain. In San Francisco, this is usually the first symptom. Water flows off the slope and carries unfixed sand with it, leaving gaps where weeds and water both get in.
- Pavers rocking or sinking in one spot. A single rocking paver almost always means the base course beneath it lost compaction or got saturated. The paver itself is fine; what’s under it isn’t.
- Hairline cracks spreading across the slab. Fine cracks in a poured Quikrete surface are normal in the first year, but cracks that widen or step at the edges point to base movement or a pour that cured too fast in the sun.
- Ponding at the apron or a low corner. Water that sits instead of draining means the slope is off by a fraction of an inch. It doesn’t look like much. Over two or three winters it undermines the whole edge.
- Efflorescence: the white chalky bloom. That haze is salts migrating to the surface, usually a sign of moisture moving through the concrete. It’s cosmetic on its own, but it often runs alongside a real drainage problem worth checking.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
What you pay depends on the surface type, the square footage, and how much of the base has to come up. Here are the installed ranges we quote in San Francisco:
| Job | Installed Range (San Francisco) |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Asphalt driveway paving | $4,130 – $10,620 |
| Driveway replacement | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
| Paver patio installation | $4,130 – $12,980 |
The number moves with three things: square footage, how much old surface and failed base has to be removed, and whether drainage has to be corrected before anything new goes down. Our pricing is upfront, so the number on the quote is the number you pay, with no change orders invented mid-job. Every installation is backed by our 730-Day Done Right Promise.
If you want a sense of scale, paver work is the more durable choice where a driveway takes real traffic, and concrete is the faster pour. We’ll tell you which one fits your slope and your use, not just what’s cheaper to schedule.
DIY or Call Us?
Some of this you can check yourself, safely. Walk the surface after a rain and mark where the water ponds. Tap a few pavers with a screwdriver handle and listen for a hollow sound. Look at the joints and note where sand has washed away. Those three checks tell you whether the issue is cosmetic or structural.
Where DIY goes wrong is at the base. Laying new pavers or patching a pour over an unstable subgrade just moves the failure six months down the road, and redoing a driveway twice costs far more than doing it once. Pouring a slab that has to carry a car is heavier work than it looks, and it goes wrong fast when the mix and the cure aren’t right. That’s the point to bring in a trained hand.
Call (866) 320-2646 to schedule a free estimate. A live person answers around the clock, and we’ll tell you straight whether you need a repair or a replacement.
FAQs
A properly installed paver driveway typically lasts 25 to 30 years, and a poured concrete surface 20 to 30 years, with our coastal climate testing both. The Bay Area fog and winter rain are hard on joint sand and drainage, so how well the base was built matters more than the brand on the bag. Call (866) 320-2646 for an exact quote on your property, and estimates are free.
Often, yes. A single rocking paver or a localized crack can usually be lifted, re-based, and reset, or re-sanded and sealed, at a fraction of replacement cost. The deciding factor is whether the problem is one spot or the whole base, which we can tell you after a walk of the surface. Call (866) 320-2646 to find out which side of that line you’re on.
A joint re-sand and seal is usually done in a single visit. Lifting and resetting a few pavers is a day’s work. A full replacement is a multi-day project once you factor in removal, base prep, and cure time, and we’ll give you the schedule in writing up front. Call (866) 320-2646 to get your timeline.
We specify the right Quikrete product for the job and source it through established suppliers, then check it on delivery for date and condition before it touches your property. The mix is only as good as the base under it, which is where our technicians bring their experience. Call (866) 320-2646 to talk through your project and lock in your free estimate.
Your driveway is the first thing anyone sees and the last thing you want to redo. Groundwork Construction Co. of San Francisco handles the full scope from base prep to final walkthrough, backed by the 730-Day Done Right Promise and calls answered by a live person 24/7. We also work across other trusted lines like KraftMaid, Cambria, and Silestone, but for Quikrete driveway and paver work in San Francisco, you’re in the right place. Call (866) 320-2646 for a free estimate and design consult, and take $1,000 off any project over $10,000.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.