A Groundwork company - serving San Francisco, CA

Sakrete Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sakrete Driveway & Pavers: The San Francisco Owner’s Guide

We install Sakrete-compatible driveway and paver systems across San Francisco, and most full paver driveway jobs run $8,260 – $21,240 installed, while a concrete pour lands at $5,310 – $14,160. Repairs and resealing start far lower, at $295 – $825 for sealing. When a Sakrete surface starts to go, owners usually notice it in one of two ways: a hairline crack that spreads a little more each rainy season, or a low corner where water pools after a storm and never quite drains. Both point to the same underlying story – a base that moved, a joint that opened, or a mix that cured too fast in the sun. We’re an independent contractor, not affiliated with Sakrete, and we match the right material to your existing surface.

Call (866) 320-2646

Which Sakrete Models This Applies To

Sakrete isn’t one product – it’s a family of bagged mixes, and what’s right for your driveway depends on which one is failing. The common ones San Francisco homeowners bring us are Sakrete High-Strength Concrete Mix (the 80 lb bag most driveways are poured with), Sakrete Sand Mix for topping and patching, and Sakrete Paver Set or Polymeric Sand for the joints between pavers. Each behaves differently and each fails differently.

To identify what you’re working with, check the original bag, any leftover inventory in the garage, or the pour receipt from whoever did the last job. If there’s nothing on paper, we measure: slab thickness, joint spacing, and the sound of the surface under a tap tell us most of what we need. On pavers, the joint sand is the tell – polymeric sand sets hard and dark, plain sand stays loose and pale.

Here’s the OEM-versus-aftermarket decision specific to Sakrete: Sakrete brand mixes are widely available and consistent bag to bag, which matters on small patches where a different mix could cure at a different rate and crack along the seam. For a full replacement, we often specify a regional mix designed for the Bay Area’s coastal moisture, which outperforms a standard bagged product over a ten-year horizon. On pavers, we stay with Sakrete polymeric sand when the existing joint profile matches it, because a mismatched sand shrinks away from the joint edges within one wet season. You’ll see the same rigor we bring to KraftMaid cabinets or Silestone counters – the material has to match the surface it’s going onto.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sakrete Driveway & Pavers Is Failing

  • Hairline cracks spreading from corners or joints. Usually a sign the sub-base wasn’t compacted enough or the slab was poured too thin – water gets in, freezes or expands, and the crack widens. In San Francisco’s fog belt, cracks on the ocean side often show up first because of the constant moisture cycling.
  • Pooling water after rain. A low spot means the base has settled or the original slope wasn’t set correctly. Left alone, that standing water works its way under the slab or paver bed and speeds up everything else on this list.
  • Pavers rocking or shifting underfoot. When you step on a paver and it moves, the bedding sand beneath it has washed out or the edge restraint has failed. This is one of the earliest warnings and one of the cheapest to fix if you catch it early.
  • Joint sand washing out. Polymeric sand should stay put. If it’s eroding in a line or a corner, water is channeling where it shouldn’t – often because a downspout or gutter is dumping onto the driveway.
  • Surface scaling or flaking. The top layer of concrete is spalling off, usually from a mix that was too wet at pour or from de-icing salt over the years. Once scaling starts, patching is a stopgap and replacement becomes the honest answer.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

What you pay in San Francisco depends on three things: surface area, access (a narrow driveway off a steep street costs more to work), and whether we’re replacing a full driveway or repairing a section. Here’s how the ranges break down:

  • Paver driveway installation: $8,260 – $21,240 – includes excavation, base prep, bedding sand, pavers, polymeric sand, and edge restraint.
  • Concrete driveway installation: $5,310 – $14,160 – includes formwork, rebar or mesh, pour, finish, and control joints.
  • Driveway replacement (tear-out and redo): $5,900 – $16,520 – includes demo and haul-away of the old surface.
  • Driveway sealing: $295 – $825 – a protective coat that extends the life of concrete or pavers.
  • Paver patio installation (if you’re extending the hardscape): $4,130 – $12,980.

Every quote is upfront and line-itemed – the number you see is the number you pay. The work is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction: if it’s not done right, we make it right. On projects over $10,000, you get $1,000 off, and 0% financing for 18 months is available.

DIY or Call Us?

Some of this you can safely check yourself. Walking the surface to find rocking pavers, watching where water pools after a rain, and re-sanding a small joint that’s washed out are all reasonable weekend tasks for a careful homeowner. Replacing an entire polymeric sand joint system or patching a section of slab is where it gets tricky – the wrong mix, the wrong moisture level, or a base that wasn’t compacted will fail again within a season, and you’ve spent the money twice.

Tear-out and re-pour is genuinely heavy work, and a 4-inch slab of concrete is not something to move by hand. Where DIY most often goes wrong on Sakrete hardscape is base prep – it’s the invisible step nobody photographs and the one that determines whether the surface lasts five years or twenty-five. If your driveway has cracking beyond a hairline, shifting pavers, or standing water, that’s a call-us situation, not a patch kit. Reach us at (866) 320-2646 and we’ll take a look. Calls are answered by a live person 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch