Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The San Francisco Owner’s Guide
Schluter bathroom remodeling in San Francisco typically runs $10,620 to $33,040 installed, depending on tile area, whether you’re rebuilding a shower pan, and how much waterproofing substrate has to come out. The Schluter component itself (bonding flange, Kerdi-Band, drain assembly, curb, transition profile) is a small slice of that number; the labor and the re-tile are the cost. We install Schluter-compatible waterproofing systems, and we can usually scope and quote a repair without tearing the whole bathroom apart.
Here’s how owners find out something’s wrong. A grout line at the shower curb starts weeping every time the shower runs. A tile at the drain edge sounds hollow when you tap it. The grout at the base of the wall turns dark and won’t bleach out. In a city with as much fog and interior moisture as San Francisco, those small failures have a way of showing up first on the north-facing bathroom wall, the one that never gets warm and never fully dries.
Which Schluter Models This Applies To
Schluter’s bathroom side splits into a few product families, and matching the right one matters more than most owners expect. Kerdi is the sheet waterproofing membrane (Kerdi, Kerdi-Band, Kerdi-Fix sealant). Kerdi-Board is the foam tile backer board, and it does not bond directly to framing the way cement board does. Ditra and Ditra-Heat are the uncoupling membranes for floors. Kerdi-Line is the linear drain; Kerdi-Drain is the point drain. Schluter’s profile lines (RENO-U, RENO-T, DILEX, QUADEC) are the edge and transition trims at thresholds and wall-to-floor joints.
To identify what you have, read the printed lettering on the membrane or board face before it’s covered, measure the drain grate rough opening with a tape (Kerdi-Drain grates come in multiple frame sizes and they are not interchangeable between generations), and note whether the drain body is ABS or PVC. That last detail trips people up: a homeowner buys a replacement grate set online only to find it won’t seat because the body underneath is a different series.
OEM versus aftermarket for Schluter specifically: the grates, drain assemblies and profile trims are worth buying authentic. The systems are engineered as a coordinated assembly, and a $30 knockoff drain body has no track record against the bonded waterproofing detail Schluter tests. On generic accessories like tile spacers or a standard 2-inch clamping ring, a quality equivalent is fine. We are an independent service provider, not affiliated with Schluter, so we specify the genuine component when the warranty chain depends on it and tell you honestly when it doesn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
Five symptoms we see regularly in San Francisco bathrooms, and what each one usually means:
- Water staining at the curb or along the bottom of the wall. The Kerdi-Band overlap or the Kerdi-Fix seal at a penetrator has let go. Where the membrane seam fails, water travels sideways along the substrate and shows up on the far side of the shower long before the surface tile cracks.
- Hollow-sounding tiles at the drain or door threshold. Thin-set has de-bonded from the foam board. On Kerdi-Board, a missed thin-set notch leaves a void that flexes every time someone steps near it.
- Grout that darkens, re-cracks, or won’t clean. This is usually not a grout problem. Moisture is sitting behind the tile because the drainage plane under the surface isn’t doing its job.
- Loose or rocking linear drain grate. On a Kerdi-Line, a grate that won’t sit flush usually means the channel was set slightly out of level or the frame clips have failed.
- Musty smell that returns after every deep clean. In San Francisco’s cool, humid summer (our indoor RH runs high most of the year), a small leak in a poorly sloped corner grows mold quickly. The smell is the tell; the mold is the consequence.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed bathroom remodeling ranges in San Francisco land between $10,620 and $33,040 for a full bathroom. A narrower scope (re-waterproofing a shower and resetting tile at the drain and curb) usually sits at the low end. Rebuilding a walk-in shower with new Schluter Kerdi-Board and a linear drain is closer to the middle. Reconfiguring the room, moving plumbing, or a tub-to-shower conversion pushes toward the top.
What moves the number: total square footage of tile, whether the shower pan has to come out, drain type and whether the drain body is being changed, and whether floor heated tile (Ditra-Heat) is part of the plan.
| Scope | Installed range (San Francisco) |
|---|---|
| Bathroom remodel, full | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement (tile + waterproofing reset) | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
We price parts and labor separately on the written line-item quote. The part number and cost is on the estimate. The 730-Day Done Right Promise covers the workmanship on the install; if the waterproofing detail fails inside that window, we make it right.
DIY or Call Us?
Some of this you can safely check yourself. Look for loose grout with a credit card edge. Tap tiles with a screwdriver handle to listen for hollowness. Inspect the caulk line at the curb for gaps. Photograph the subfloor area under the bathroom if you have access from below. What you shouldn’t do yourself: pull a drain body out of a Kerdi shower assembly, re-bond Kerdi-Band into a wet corner, or reset Kerdi-Board. The waterproofing detail is where DIY goes wrong. A DIY re-grout over a failed membrane buys you a few months and spends your tile budget. If a tile in the shower won’t sit flat or there’s any moisture under it, that’s a call-us problem.
Call (866) 320-2646 for a free estimate. We’ll identify what Schluter system is under your tile, tell you what actually needs to come out, and put the numbers in writing.
FAQs
A correctly installed Kerdi bathroom assembly should last 25 to 30 years in a dry, well-ventilated bathroom. In San Francisco specifically, the wet-room environment (low air conditioning, high outdoor humidity most of the year, cool north-facing walls that don’t dry fast) puts extra demand on the caulk and grout upkeep. If those get neglected, the membrane behind the tile starts taking moisture long before year 30.
Sometimes. A failing grate clip or an isolated patch of failed Kerdi-Band at a single wall corner can often be repaired by re-bonding with Kerdi-Fix and re-tiling that small area. A failed membrane across the whole shower floor cannot. If water has migrated beyond a single seam or the foam board has gone soft under your foot, the shower is coming out. We’ll be straight with you on the estimate about which case you’re in.
A localized drain or grate replacement can be done in a single visit. A full tile-out and re-waterproof of a shower runs 5 to 8 working days, including thin-set cure time between Kerdi layers. A complete bathroom remodel is 3 to 6 weeks depending on tile material and fixture lead time. We quote the timeline in the written estimate so you know before you commit.
We specify the genuine Schluter component matched to the series you have (Kerdi, Kerdi-Board, Kerdi-Line, Kerdi-Drain, Ditra) and confirm the drain body material and grate rough opening before ordering. Lead time on Schluter components is usually 3 to 7 business days. If you want to supply the part yourself, that’s fine – we install it and record the model and batch on the work order so the warranty chain holds.
Other brand partners we spec on San Francisco bathroom remodels: KraftMaid vanities, Cambria and Silestone countertops. Every part of the job is covered by the 730-Day Done Right Promise, our team’s technicians carry up to 12 years of experience, and calls are answered by a live person 24/7.
Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate. The number you see is the number you pay.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.