Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Driveway & Pavers: The San Francisco Owner’s Guide
We install and repair Schluter-compatible driveway and paver systems across San Francisco, and most paver driveway projects here land between $8,260 and $21,240 installed, depending on square footage, base prep, and drainage. When a Schluter system part fails, you usually find out through water: efflorescence blooming across the pavers, a low spot that holds a puddle long after the fog burns off, or a paver edge that’s started to rock underfoot on the slope down to the garage. On San Francisco’s hillside lots, that’s rarely a paver problem. It’s almost always a failing drainage profile, edge restraint, or uncoupling membrane underneath, and the part has to match your specific Schluter assembly.
Which Schluter Models This Applies To
Schluter builds several systems that apply to hardscape work, and the part you need depends on which one is under your pavers. The common assemblies in San Francisco are the Schluter-DITRA family for uncoupling and waterproofing under bonded overlays, KERDI-LINE and KERDI-DRAIN linear drainage profiles where a paver terrace meets a step-down or a garage threshold, and the TREP-E, TREP-S, and TREP-V edge profiles used to finish paver edges cleanly against walls, planters, and doorways. Identify what you have by measuring the profile’s visible face width (many edge profiles run in common widths like 3/8 inch and 1/2 inch) and reading the printing on any exposed membrane edge or drain flange in a utility cut. Schluter parts are branded, not generically sized, so the exact code matters. On the OEM-versus-aftermarket call: for the waterproofing membrane and drain flanges, we install genuine Schluter parts, because a knockoff that misses the fleece backing or the flange thickness will leak in our wet winters. For edge profiles and grates, a quality equivalent with matching dimensions is often fine and saves money. San Francisco buyers should know the assembly, not just the part name. We’re an independent contractor and not affiliated with Schluter, but we’ve installed enough of these assemblies to know where the corners get cut.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Driveway & Pavers Is Failing
- Efflorescence blooming on the paver faces. White mineral haze that keeps coming back after you scrub points to moisture trapped below because the uncoupling membrane or drainage layer is compromised. In San Francisco’s marine fog, this shows up fastest on north-facing driveways.
- Standing water or a persistent soft spot. A profile that’s shifted or a clogged linear drain keeps water from moving to the street. Left alone through a wet winter, that trapped water finds the base and the pavers start settling.
- Rocking pavers along an edge. A failed edge restraint or broken TREP profile lets the perimeter lose support, and pavers shift under wheel load. This is the most common failure we see on San Francisco driveway aprons.
- Delamination or loose membrane at a joint. If the membrane’s fleece has let go from the substrate, you’ll see hollow spots and hear a dull thud when you tap. That’s a bond failure, not a paver problem.
- Cracked drain grate or cracked flange. A cracked linear grate or flange collects grit and stops draining, and cracks widen with traffic. This one means the part is past repair and needs replacement.
Replacement Cost & What’s Included
Here’s what a Schluter system repair or re-lay runs in San Francisco, installed, parts plus labor:
| Scope | Installed price range |
|---|---|
| Paver driveway installation (full) | $8,260 – $21,240 |
| Driveway replacement | $5,900 – $16,520 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway sealing | $295 – $825 |
What moves the number: which Schluter assembly is failing, how much of the base has to come up to reach the membrane or drain, and whether drainage has to be re-sloped to code. You get a written line-item quote before any work starts, upfront pricing with no surprises, and the 730-Day Done Right Promise on the workmanship. If the part itself is under a manufacturer warranty, we’ll identify the correct replacement and handle the sourcing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Look for visible water pooling, tap the pavers to hear hollow spots, measure the profile width, and read any printed codes on exposed membrane or drain parts. That information helps when you call. Where DIY goes wrong is in the base. Replacing a drain flange or re-laying a membrane means lifting pavers, re-establishing slope, and getting a waterproof bond to a substrate you can’t fully see. On San Francisco hillside driveways, a member of the team can check drainage first, because a weak joint plus a wet winter can undermine a base and turn a small fix into a much larger one. Hire a trained installer for anything that involves opening the base. Call (866) 320-2646 to schedule a free estimate; a live person answers, 24/7.
FAQs
The system, done right, typically lasts 15 to 25 years in our climate, though the paver surface outlasts the drainage components underneath. Our salty coastal air and winter rain are hard on metal grates and edge profiles, so inspect grates and drainage yearly and reseal on a schedule. Lifespan comes down to base prep and how fast you catch a leak. Call (866) 320-2646 for an exact quote on your assembly – estimates are free.
Often, yes. A failed edge profile, a single cracked grate, or a localized membrane lift can usually be repaired without a full replacement, and we quote the smallest fix that holds. Full replacement makes sense when the base itself has settled or the drainage has to be re-sloped. An honest quote tells you which you’re facing.
Most single part swaps, like a profile or a grate, are done in a single visit; larger work that opens the base typically takes two to four days depending on square footage and access. San Francisco hillside lots and tight garages can add time, so we scope it in the estimate. Call (866) 320-2646 to schedule your free estimate.
We match the exact model from the code on the part and the assembly, then source the genuine Schluter component or a matched equivalent, depending on which it is. We don’t claim to carry parts on a truck, so the right part is ordered to your job. Backed by the 730-Day Done Right Promise – if it’s not done right, we make it right.
Other brands we service
We also work with material brands across our other lines, including KraftMaid, Cambria, and Silestone for kitchens and baths.
Ready to fix your Schluter system?
Groundwork Construction Co. of San Francisco installs and repairs Schluter driveway and paver systems across San Francisco and nearby areas, with background-checked, uniformed technicians, upfront pricing, and the 730-Day Done Right Promise on every job. Call (866) 320-2646 for a free estimate and design consult – a live person answers, 24/7. Also ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.