Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU in San Francisco, CA
Silestone is a quartz surface brand, not a home addition or ADU product – so if you’ve landed here looking for a “Silestone part,” what you actually need is a quartz-surface specialist who can coordinate countertop, backsplash, and vanity work inside a new home addition or accessory dwelling unit in San Francisco. Home additions in San Francisco run $53,100 – $153,400 installed; ADUs run $106,200 – $259,600. The most common call we get starts when an owner has a cracked seam, a chipped edge, or a delaminated island slab in a finished addition and needs it matched, replaced, or cut to fit a new build-out.
Key Takeaways
- Silestone is a quartz surface product – the “part” you need is cut, fabricated, and installed inside your addition or ADU, not bought off a shelf.
- San Francisco additions land at $53,100 – $153,400 and ADUs at $106,200 – $259,600, with countertop fabrication and install running $2,360 – $7,670 of that.
- Quartz survives fog and salt air well, but quartz does not like heat – and that’s the failure we see most in San Francisco kitchens.
- Groundwork Construction Co. of San Francisco is an independent contractor, not affiliated with Silestone or its manufacturer.
Which Silestone Models This Applies To
Silestone ships under a long list of collections – Calacatta Gold, Eternal, Lagoon, Blanco Zeus, Charcoal Soapstone, and others – and the practical question is never “which Silestone is this?” but “which slab, which series, and which edge profile do I match to what’s already in the house?” If you’re adding a kitchenette, an ADU galley, or a laundry counter to an existing Silestone kitchen, you’re matching a real slab to a real slab. That means the same series and the same lot if you can find it, or a close sibling if the original is discontinued.
Here’s the compatibility gotcha most owners don’t know: Silestone slabs are nominally 2 cm or 3 cm thick, and a 2 cm slab installed at a sink cutout can be substituted with a 3 cm slab only if the cabinet run and any adjacent finished surfaces are built up to match. Skip that step and your new ADU counter sits 10 mm proud of the original – visible from the doorway. The second gotcha: look at the underside of the slab or the edge return for the fabricator’s build sheet or a series sticker, and photograph any product tag attached at install. Silestone’s own warranty is registered to the original purchaser, which almost never transfers to a resale, so on a San Francisco renovation of a home built after about 2010, you’re generally buying new material, not chasing coverage.
On the OEM-versus-aftermarket question: Silestone sells no consumer-installable “parts.” Every counter, island top, and backsplash you install in a new addition is fabricated to order by a stone shop from full slabs. What you choose is a fabricator and an installer, not a replacement cartridge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
- A crack runs from a cutout corner. Sink and cooktop cutouts are stress concentrators, and a slab with a sharp inside corner and no radius will crack there. This is a fabrication problem, and it gets worse when the cabinet run beneath is out of level.
- A seam opens along the island or peninsula. Seams are glued with color-matched epoxy and set on cabinets that need to be flat to within about 1/8 inch over the span. When the cabinetry shifts, the seam shows a hairline line within 12 to 18 months.
- Discoloration or a dull ring near the cooktop. Quartz resin yellows above roughly 300°F, and a hot pan set down on the surface leaves a mark that will not polish out. In San Francisco kitchen additions, we find this near freestanding ranges far more than near slide-in models with a rear control panel.
- A chip at a front edge. Quartz is hard but not tough. A dense edge profile like a bullnose handles bumps fine; a 3 cm square edge on a busy family counter chips and needs a fabricator visit to fill and refinish.
- A slab that has unleveled at the backsplash line. A new addition settles more than an existing house – that’s normal on a new foundation. If the counter-to-backsplash caulk joint opens more than about 1/8 inch in the first year, the counter is loading the wall, and the joint needs to be cut loose and re-caulked with a flexible sealant.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If you’re adding a kitchen, bath, or laundry counter to an addition or ADU in San Francisco, plan on the following installed ranges – these cover fabrication, install, and standard edge work:
| Scope | Installed range |
|---|---|
| Silestone countertop installation (addition or ADU galley) | $2,360 – $7,670 |
| Silestone kitchen island top | $3,540 – $11,800 |
| Silestone backsplash installation | $945 – $2,950 |
| Silestone bathroom vanity top | $945 – $3,540 |
| Full home addition (whole scope) | $53,100 – $153,400 |
| ADU construction (whole scope) | $106,200 – $259,600 |
| Garage conversion | $35,400 – $94,400 |
The counter numbers move with slab choice (a Calacatta-look series costs more than a plain white), edge profile, number of cutouts, and whether you need a full-height backsplash. Our pricing is upfront – the number you see is the number you pay, and we don’t come back for a change order on the fabrication we quoted. Every install sits inside the 730-Day Done Right Promise: if the seam opens or the edge chips in the first two years, we make it right. We also pull permits and pass inspections on the addition itself, which in San Francisco means DBI sign-off before the counter ever goes in. Live person, 24/7, if you have a question mid-project.
DIY or Call Us?
You can safely check a few things on your own: whether the counter is level at the backsplash line, whether the seam is opening, and whether a chip is on the edge or in the field. What you cannot safely do is cut, fabricate, or repair Silestone. Quartz slabs are cut with wet saws and diamond blades, edges are profiled on a router table, and seams are epoxied with color-matched resin under pressure – none of that happens at a homeowner’s workbench, and trying to fill a chip with a hardware-store epoxy will usually look worse than the chip. On a new addition or ADU, the counter also has to land after the cabinets are set, square, and level, which is the part that gets skipped on DIY builds and shows up later as a cracked cutout during the first year.
If you’re planning a new addition, ADU, or garage conversion and want Silestone surfaces inside it – or you’re matching a Silestone counter to what’s already in the house – call (866) 320-2646 to schedule a free estimate and design consult. We’ll walk the space, spec the slab, and quote it in writing. We also work with KraftMaid cabinetry, Cambria quartz alternatives, and Kohler fixtures when a project calls for them.
FAQs
How long does a Silestone counter installed in an ADU last?
Twenty years or more with normal use, though the factors that shorten it are all in the install, not the slab: an unlevel cabinet run, a sharp cutout corner, and heat exposure near the range. In San Francisco’s cool coastal climate, quartz actually holds up better than in inland markets – no freeze-thaw cycling on the counter and low UV through the foggy months – so longevity here is mostly a fabrication-and-install question. Call (866) 320-2646 for a quote on a proper install.
Can a cracked or chipped Silestone counter in my addition be repaired instead of replaced?
Sometimes. A chip on the edge can usually be filled and refinished by a fabricator and will blend, and a hairline seam can be re-epoxied. A crack that runs through a cutout corner is a structural failure of the slab and gets replaced, not repaired – patch jobs on that kind of crack fail within a year. We’ll tell you which one you’re looking at on a free visit. Call (866) 320-2646.
How long does the swap take?
For a kitchenette or ADU galley counter, plan on about a week from template to install, with the install itself finishing in a single visit. Full kitchen or island replacement takes longer because the template happens after cabinets are set and the new slab has to be fabricated and polished to order. The addition’s DBI inspection schedule governs the overall timeline, not the counter. Call (866) 320-2646 to schedule a free estimate and we’ll map it out.
How do you source the Silestone slab?
We order full slabs through our fabrication partners, matched to the series you want or the series already in the house if you’re trying to match. When a discontinued Silestone line can’t be found, we spec a close match from Cambria or another quartz line and bring samples so you can see it against the existing surface before committing. No stock in a truck, no guesswork – the slab is selected and approved before it’s cut.
Groundwork Construction Co. of San Francisco is an independent service provider. We are not affiliated with, endorsed by, or a dealer of Silestone or its parent manufacturer.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.