A Groundwork company - serving San Francisco, CA

Tamko Bathroom Remodeling in San Francisco, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Bathroom Remodeling: The San Francisco Owner’s Guide

Bathroom remodeling in San Francisco typically runs $10,620 to $33,040 installed, and most jobs are scheduled within a few days of an approved estimate. Tamko is one of our trusted brand partners for this work. When something fails in a Tamko bathroom build, owners usually find out the hard way: a soft spot in the floor near the shower, a tile that sounds hollow underfoot, water staining along a shower curb, or a warp in the substrate that shows up as cracked grout months after the remodel was finished. In San Francisco’s damp, marine air, those symptoms tend to surface faster than they would in drier climates, and the sooner we look at them the less of the build has to come apart.

Call (866) 320-2646

Which Tamko Models This Applies To

Tamko’s reach into bathrooms is mostly through its building-products lines: roofing underlayments and waterproofing membranes that end up under tile floors and behind shower walls, plus the accessory tapes and primers that make those systems hold. If your remodel specification calls out a Tamko membrane or underlayment, the part that fails first is almost always a seam or a penetration, not the field material. The way to identify what’s actually installed is to read the job file or remodel spec, find the product label on any leftover roll, and measure the membrane thickness and roll width against the spec sheet. Matching the right accessory matters more than matching the brand name: a membrane and its tape have to be from the same system or the bond weakens. On the OEM-versus-aftermarket question, we match Tamko accessories to the Tamko membrane where the spec calls for it, and we use a compatible building-products equivalent only when the original line is discontinued and the spec allows it. We don’t stock parts and we don’t carry them on a truck; we source what your build actually needs.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Bathroom Remodeling Is Failing

  • Hollow-sounding tile. Tapping over the floor and hearing a dull echo usually means the membrane beneath has lost its bond and the thinset has separated. It gets worse every time the floor gets wet.
  • Cracked grout lines that keep coming back. Grout cracks along a shower pan edge or floor seam point to movement in the substrate, often from a failed waterproofing layer that let moisture in.
  • Water staining on a shower curb or wall base. Wicking at the bottom of a shower wall is the classic sign that a membrane seam or a corner detail wasn’t sealed correctly.
  • Soft spots in the subfloor. A spongy patch near the shower or tub means water has been getting past the waterproofing for a while. This one needs to be opened up, not patched over.
  • Musty smell that returns after cleaning. In San Francisco’s cool, humid air, a persistent musty odor in a bathroom often traces to trapped moisture behind the finish, not surface mold.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In San Francisco, a bathroom remodel runs $10,620 to $33,040 installed, a small bathroom remodel runs $5,900 to $14,160, a walk-in shower installation runs $5,310 to $14,160, and a tub-to-shower conversion runs $4,130 to $11,800. Shower replacement alone is $3,540 to $10,030, and a bathroom vanity installation is $945 to $3,540. What drives the range: square footage, how much of the waterproofing system needs to come out, whether the shower is a full rebuild, tile selection, and whether plumbing or the subfloor has to be repaired. We quote line-item pricing up front, so parts, labor and any repair work are separate lines: the number you see is the number you pay. That work is covered by our 730-Day Done Right Promise, and we also work with KraftMaid, Cambria and Silestone for the cabinets and surfaces that finish the job.

DIY or Call Us?

You can safely check a few things yourself: read the remodel spec or job file, find the product label on any leftover material, measure the membrane width and thickness, tap tile for hollow spots, and look for recurring grout cracks or staining. What you should not do is the repair itself. Waterproofing is a system, and a membrane, its tape and its primer have to go down in the right order and at the right thickness or the bond fails and the leak comes back, usually worse. Full bathroom rebuilds are planned work, not emergency work, so we schedule them rather than promise same-day service. Call (866) 320-2646 and we’ll set up a free estimate; a live person answers around the clock, and our background-checked technicians arrive in uniform.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch