A Groundwork company - serving San Francisco, CA

Tamko Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Driveway & Pavers: The San Francisco Owner’s Guide

Tamko-spec driveway and paver work in San Francisco typically runs $8,260 – $21,240 for a full paver driveway, and most inspections or small part-level repairs can be scheduled within the same week. We work with the pavers, edge restraints, base materials and joint systems that pair with Tamko products, and we quote every job upfront so the number you see is the number you pay. Owners usually discover the problem the same way: a loose or rocking paver near the garage apron, sand washing out of the joints after a storm, or a hairline crack spreading across a paver face after a wet winter. What starts as one wobbly stone in the Sunset is almost always a base or joint failure underneath, not the paver itself.

Call (866) 320-2646

Which Tamko Models This Applies To

Tamko pavers and hardscape systems are specified by product line, face dimension and thickness, and the model matters more than most homeowners expect. A paver from one line carries a specific nominal thickness (commonly 60mm or 80mm for driveway-rated applications), and mixing thicknesses or edge profiles across a driveway is how you get lippage and premature failures. The fastest way to identify what you have is to check the original project paperwork or a stamped sample, then measure the actual face and thickness with a tape, not by eye. Labels fade and edge stamps disappear after a few wet seasons in San Francisco, so measurement is often the reliable path.

Once you know the line, you face the OEM-versus-aftermarket decision. OEM Tamko-matched pavers give you a true color and dimensional match for a repair, but they carry a premium and can take longer to source on a discontinued line. Quality aftermarket equivalents in the same thickness and rating can match the warranty performance at a lower cost, especially for base, edge restraint and joint sand where the brand stamp matters far less than the spec. For color-critical driveway faces, we lean OEM. For structural components underneath, the spec is what counts. We’re an independent service provider and not affiliated with Tamko.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Driveway & Pavers Is Failing

  • Rocking or loose pavers. This almost always means the base beneath has settled or the bedding layer washed out. In San Francisco’s sandy soils and steep grades, water finds the weak spot fast.
  • Sand eroding from joints after rain. Joint sand that disappears every wet season points to either the wrong sand or poor drainage, and the pavers soon shift without the interlock.
  • Hairline cracks spreading across a paver face. Cracks that grow after cold nights usually trace to a paver rated below driveway traffic or a subsurface void.
  • Lippage, where one paver sits higher than its neighbor. A lip over 3mm is a trip hazard and a sign the base compaction failed. Left alone, it spreads.
  • Efflorescence, that white chalky film. It can be cosmetic, but persistent bloom near the garage or a low corner often signals trapped moisture and a drainage problem underneath.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For San Francisco, paver driveway installation runs $8,260 – $21,240, while a paver patio installs at $4,130 – $12,980. If you’re comparing against a concrete driveway, that starts at $5,310 – $14,160, and asphalt paving runs $4,130 – $10,620. A full driveway replacement sits at $5,900 – $16,520, and routine sealing is $295 – $825. What drives the range on a paver job is square footage, base depth required by your grade, edge restraints, drainage work, and whether the repair is a spot level or a full tear-out and re-lay. Labor and materials are quoted line by line, so you see exactly what the part and the install cost separately. Every job is backed by our 730-Day Done Right Promise, and estimates are free.

DIY or Call Us?

There’s a safe middle ground here, and it’s worth being direct about it. You can check the joint sand, sweep and re-sand a small area, clear debris from a drain line, and note which pavers rock when you press on a corner. That kind of honest observation helps us diagnose fast. Where DIY goes wrong is in the base. Lifting and re-setting a paver without re-compacting the bedding layer is the single most common way a small repair turns into a whole driveway replacement, and cutting pavers to fit edge restraints takes the right blade and a steady line. On a sloped San Francisco driveway, poor drainage work means water heading toward the garage slab. Call (866) 320-2646 for an inspection and a free estimate; we’ll tell you honestly whether it’s a spot fix or a re-lay.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch