Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The San Francisco Owner’s Guide
We install Tamko fence systems and fence components across San Francisco, and a typical installed project runs $4,130 to $10,620 depending on fence length, height, gate count, and how much site prep the property needs. Fence work is scheduled, not same-day; we quote a firm date and hold it. Most owners find us after a season of watching the problem grow: a post that’s gone soft at the soil line, boards cupping away from the rails, a gate that drags and has to be lifted to latch. In San Francisco that cycle usually starts with wind-driven rain off the Pacific soaking the fence line and then the fog holding that moisture in place for days.
Which Tamko Models This Applies To
Tamko is best known for roofing and waterproofing, and fence work in San Francisco runs through their composite and wood-plastic lines plus the fasteners and brackets that come with them. Before anything gets ordered, we measure your actual run: post spacing (typically 6 or 8 feet on center), panel height, rail height, and the fastener pattern on the bracket you’re replacing. A sticker inside a gate frame or a brand mark on the post cap tells you the series; if there isn’t one, the dimensions do the work. Here’s the gotcha that bites people: the same nominal board profile can differ by a fraction of an inch between production batches, and a panel cut for one run won’t always seat cleanly in another. We verify profile and color code from your existing material, not from a photo.
We’re an independent service provider and not affiliated with Tamko, so we’re free to tell you when the OEM piece is worth waiting for and when a like-for-like composite board or a standard hot-dip galvanized bracket is the smarter buy. On structural parts – posts, rail brackets, hinge hardware – we specify OEM-compatible or better, because the cheap version is what fails first in coastal weather.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Fence Installation Is Failing
Fence problems announce themselves early if you know what you’re looking at. These are the five we see most on San Francisco properties.
- Posts soft at the soil line. Water wicks into the post base and the wood or composite core breaks down from the inside. Push a screwdriver into the post about six inches up – if it sinks, the post is done, not just the board.
- Boards cupping or bowing away from the rails. Usually moisture uptake on one face and not the other, made worse by sun on one side and fog on the other. Once board edges lift, fasteners start backing out.
- Gate sag and dragging latches. A gate is a lever arm hanging off one post, and that post takes the load every time the gate swings. Sag means the hinge post is moving, not that the hinge is bad.
- Rust streaks at brackets and hinges. Coastal salt air eats standard hardware fast. Streaking means the coating has failed and the fastener is now the weak point in the assembly.
- Racking runs and leaning sections. Ground movement or a failed post footing. In San Francisco, a fence built on a slope without stepped footings will rack within a season or two.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed fence work in San Francisco typically lands between $4,130 and $10,620. What drives the number: linear footage, fence height (a 6-foot run costs more than a 4-foot run in material and wind load), gate count, whether old material has to be hauled off, and how much footing work the ground demands. Sloped or rocky lots add excavation time. You get upfront pricing – the number you see is the number you pay – and a written breakdown that separates material from labor so there are no mystery line items later. Every install is covered by our 730-Day Done Right Promise, and we pull permits where San Francisco requires them.
DIY or Call Us?
You can safely do the inspection yourself: probe post bases, check for racking with a level, look at hardware for rust streaks, and measure post spacing. What goes wrong in DIY fence work is the structural side. A post set in soil at the wrong depth or without proper footing will lean, and a gate hung off a marginal post will sag no matter how many times you adjust the hinge. Working on top of a fence near a property line also raises real questions about height limits and setbacks that San Francisco enforces. If the project is a full run or a gate rebuild, that’s when a call makes sense. Call (866) 320-2646 for a free estimate and we’ll tell you honestly whether you need a repair or a replacement.
FAQs
Expect 15 to 25 years for a properly installed composite fence in San Francisco’s climate, with the posts being the limiting factor, not the boards. Salt air and constant fog accelerate hardware corrosion, so the brackets and fasteners usually need attention before the fence material itself does. Call (866) 320-2646 for an exact quote on your run – estimates are free.
Yes, when the posts are sound. If the post base is soft or the run is racking, a patch job buys you a season at most. We’ll probe the posts first and tell you which situation you’re in before quoting. Call (866) 320-2646 to schedule a free assessment.
A typical residential run in San Francisco takes two to four days once material is on site, depending on footage, gate count, and footing conditions. We confirm the schedule in writing before work starts. Call (866) 320-2646 for a free estimate.
We verify your existing profile and hardware by measurement and brand marking, then order the matching material through our supplier network. We don’t carry parts on a truck – each order is matched to your run. Call (866) 320-2646 and we’ll walk you through what we need to identify your system.
Whether you’re replacing a single run or the whole perimeter, we handle it from foundation to finish line – fence, gates, and cleanup. We also work with KraftMaid, Cambria, and Silestone on interior projects. Call (866) 320-2646 for a free estimate on your Tamko fence installation in San Francisco.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.