Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Windows & Doors: The San Francisco Owner’s Guide
We install and service Tamko-compatible windows and doors across San Francisco, with typical installed window replacement running $5,310 to $17,700 and impact-rated installations from $9,440 to $29,500 for a whole-house package. Most parts calls fall into two buckets: a failed window balance or sash hardware on a Tamko unit, or a door that’s dragging, leaking, or won’t latch because the hinges, threshold, or weatherstripping have given out. Owners usually notice when a sash won’t stay up, a door scrapes the jamb through the dry season and swells shut in the fog, or water shows up on the interior sill after a storm.
Which Tamko Models This Applies To
Tamko makes a wide range of vinyl and aluminum window lines plus entry and patio door systems, and the part you need depends entirely on which series you have. The model label is your starting point: Tamko places a sticker on the top or side of the sash frame, or on the head jamb of a door, with the series and size code. If the label is gone, we measure the sash and frame, check the balance type, and match the hardware to the profile.
The compatibility gotcha that trips up most San Francisco owners buying online: Tamko’s vinyl window balances come in specific channel depths and spring weights, and a “universal” replacement balance from a big-box store often won’t seat or won’t hold the sash. The weight rating must match the sash load, which changes with glass package and size. For doors, the threshold and hinge pattern are model-specific, and an aftermarket hinge that looks identical can throw the door out of square within a season.
OEM parts come with a guaranteed fit but cost more and take longer to source. Quality aftermarket equivalents exist for common hardware (balances, weatherstrip, rollers, hinges), and we’ll tell you honestly when one is a safe swap and when it isn’t. We aren’t affiliated with Tamko. We’re an independent service provider, so our recommendation is based on what fits your unit and holds up in Bay Area weather, not on moving a brand’s inventory.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Windows & Doors Is Failing
These are the symptoms we see most often in San Francisco homes, and each points to a specific part behind it.
- The window sash won’t stay up, or slams down when you open it. That’s a failed balance or a broken balance spring. Vinyl balances wear out and lose tension long before the frame shows any problem.
- Water on the interior sill or fogged glass after a storm. A failed weather seal, a cracked glazing bead, or a seal failure in the insulated glass unit itself. San Francisco’s fog and salt air speed up seal degradation, especially on west-facing windows near the ocean.
- The door drags, scrapes, or won’t latch. Usually worn hinges, a sagging frame, or a threshold that’s settled. In older San Francisco homes, seasonal wood movement is a factor too.
- Drafts or daylight around the door perimeter. Deteriorated weatherstripping or a worn sweep at the bottom. Easy to spot on a cold morning with the door closed.
- A roller or track that’s stiff or grinding on a sliding patio door. Worn rollers or a bent track. Left alone, a stiff roller grinds the track and turns a small part swap into a bigger repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed window replacement in San Francisco runs $5,310 to $17,700 depending on size, glass package, and how many units you’re doing. Impact-rated window installation runs $9,440 to $29,500, and that range reflects the heavier glass and reinforced framing those units require. Door hardware, balances, and weatherstripping repairs are priced line by line, so you see parts and labor separately.
| Scope | Installed range |
|---|---|
| Window replacement (per project) | $5,310 – $17,700 |
| Impact-rated window installation | $9,440 – $29,500 |
| Hardware, balance, weatherstrip repair | Quoted line by line |
What drives the range: number of units, glass upgrades, whether the frame is sound or needs reframing, and the complexity of the opening in an older San Francisco building. We quote upfront, with no change orders, and all work is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some things you can safely check yourself. Look for the model label, note whether the sash balances or drops, and check that hinges and weatherstrip aren’t visibly worn. Measuring your sash and opening is useful too. That information gets you a faster, more accurate quote.
Where it goes wrong: forcing a replacement balance that’s the wrong weight can crack a vinyl sash, and re-hanging a door on the wrong hinge throws the whole frame out of square. On a high window or a door that’s part of an exterior wall, a bad install opens a water path that shows up months later. We recommend a trained installer for anything involving the frame, glazing, or exterior seal. If you’re not sure which part is at fault, call (866) 320-2646. A live person answers around the clock, and estimates are free.
FAQs
Most Tamko window balances and hardware last 10 to 15 years before tension fades, though coastal San Francisco homes near the fog belt often see seal and weatherstrip wear faster, sometimes within 8 to 10 years. Fog, salt air, and temperature swings between the ocean and the bayside microclimates all shorten part life. Call (866) 320-2646 for an exact assessment of your unit. Estimates are free.
Often yes. A single window balance, a set of hinges, or weatherstripping is a targeted repair and far cheaper than a full unit replacement. Repair stops making sense when the sash frame is cracked, the glass seal has failed, or the frame itself is rotted. Call (866) 320-2646 and we’ll tell you which side of that line your window falls on.
A hardware or balance repair on a single window is usually a short visit, and most of those jobs finish in one appointment. A full window unit replacement takes longer because it involves removal, refitting, and resealing against the exterior. We’ll give you a realistic window at quote time. Call (866) 320-2646 to schedule your free estimate.
We identify your series from the frame label or by measuring the sash and hardware, then source the OEM part or a fit-matched equivalent for that series. We don’t carry stock on a truck, so we confirm the exact part before the install visit rather than guessing on site. An independent service provider, we’re not affiliated with Tamko, which means our recommendation serves the fit. Call (866) 320-2646 to get started.
When a Tamko window or door in your San Francisco home needs a part, the goal is simple: match it right, price it honestly, and install it so it lasts through the next fog season. That’s the standard Groundwork Construction Co. of San Francisco holds on every job, from foundation to finish line. We also work with KraftMaid, Cambria, and Silestone on the interior projects that often go alongside window and door work. When work is ready to do, we back it with our 730-Day Done Right Promise and pricing you see upfront with no surprises. Call (866) 320-2646 to schedule your free estimate. A live person answers around the clock.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.