A Groundwork company - serving San Francisco, CA

Techo-Bloc Bathroom Remodeling in San Francisco, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Techo-Bloc Bathroom Remodeling: The San Francisco Owner’s Guide

We build and install Techo-Bloc bath and shower systems in San Francisco, and a full bathroom remodel typically runs $10,620 to $33,040 installed. Smaller projects land closer to the low end; larger layouts with a walk-in shower and full tile work push toward the high end. Our technicians have up to 12 years of experience with modular shower bases, tile-in drains and integrated wall systems, and we can usually assess a failing base, curb or drain connection on the first visit.

Call (866) 320-2646

Owners here tend to discover the problem slowly. A hairline crack opens along a shower curb. Grout near the drain stays dark after you mop it. Water shows up on the ceiling of the unit below, which is how most San Francisco bathroom failures get noticed in a building with shared plumbing. Once moisture is tracking under the system, patching the surface rarely fixes it.

Which Techo-Bloc Models This Applies To

Techo-Bloc’s bath line covers modular shower bases, curbed and curbless pans, wall panels and matching trim and drain covers. If you’re holding a spec sheet or a box label, look for the system family name, the pan dimensions (both nominal and actual footprint), the drain style, and the curb height. Those four data points determine whether a replacement pan or panel drops into your existing rough-in or whether the framing and drain have to move.

The compatibility gotcha we run into in San Francisco is drain placement and slope. A “standard” replacement pan assumes the drain sits at a fixed offset from the wall, and in older buildings the plumber may have set the drain wherever the joist bay allowed. Measure from the finished wall to the drain center before you order anything. If it’s off by more than the pan’s tolerance, a direct swap fails inspection on slope alone.

On the OEM question: factory Techo-Bloc components match the system’s tolerances exactly, and for the pan, drain and wall panels we recommend factory-matched parts. Aftermarket tile-in grates and trim can work fine and cost less, but they need to fit the drain body you already have – not one that looks close. We source factory parts for the structural pieces and quality aftermarket for the cosmetic trim when the numbers favor it. Groundwork Construction Co. of San Francisco is an independent service provider, not affiliated with Techo-Bloc.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Techo-Bloc Bathroom Remodeling Is Failing

Five symptoms we see most often in San Francisco bathrooms, and what’s actually going on underneath:

  • Hairline cracks along the curb or pan edge. Movement in the subfloor, or a pan set on a deflection the framing couldn’t carry. Hairline cracks let water past the surface and into the underlayment.
  • Grout near the drain darkening and staying dark. The weep layer under the mortar bed is blocked, so water sits instead of draining. Re-grouting buys a few weeks; the bed itself is the problem.
  • Soft spots or flex underfoot in the shower. The pan has separated from the subfloor or the subfloor has taken on water. Flex underfoot means the waterproof layer is being worked open every time you step in.
  • Staining on the ceiling below. Active moisture migration, and in a multi-unit San Francisco building it’s usually the curtain drain or the pan-to-drain connection. This one needs attention before it reaches the framing.
  • Mildew returning to the same caulk joint after cleaning. The joint is wicking from behind. Repeated mold in one spot is a moisture source, not a cleaning problem.

San Francisco’s damp air and the humidity a bathroom holds between showers accelerate all of this. A system that stays wet longer will show failure sooner than the same product in a drier climate.

Replacement Cost & What’s Included

For a Techo-Bloc bathroom remodel in San Francisco, plan on $10,620 to $33,040 installed. Smaller bathroom remodels run $5,900 to $14,160, a walk-in shower installation is $5,310 to $14,160, and a tub-to-shower conversion is $4,130 to $11,800. Shower replacement alone is $3,540 to $10,030, and a bathroom vanity installation is $945 to $3,540. These are the ranges we hold to across the site.

What drives the number: whether the drain and rough-in stay put, whether the subfloor needs repair or replacement, pan size and format (curbless pans cost more because the floor has to be built down), and whether we’re replacing the whole system or just the pan and trim.

You get a written line-item quote with parts and labor broken out, so you can see what the factory components cost against the install. Upfront pricing, no surprises: the number you see is the number you pay. Every project is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space – if it isn’t done right, we make it right.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself: look for cracks, press on the pan for flex, note where the drain sits relative to the wall, and check the ceiling below for staining. Take photos and measure. That information helps us quote fast.

Where DIY goes wrong is the pan and the drain. Setting a shower pan means getting the slope, the weep layer and the connection to the drain body exactly right; a pan that’s off by a fraction of an inch can pass a visual check and still leak into the structure. The waterproofing has to be continuous from pan to wall before any tile goes down, and that’s the step most owner-installs fail. We don’t hand out a step-by-step for the pan and drain because a failed connection means water in your framing and your neighbor’s ceiling.

Most of these jobs are completed in a single visit once the parts are on site. Call (866) 320-2646 and we’ll tell you honestly whether it’s a swap or a rebuild.

FAQs

Contact Groundwork Construction Co. of San Francisco

If you’re in San Francisco and your Techo-Bloc bathroom system is showing its age, the first step is a conversation, not a purchase. We’ll look at the photos, ask about the drain, and tell you what’s actually failing. We also handle KraftMaid cabinetry, Cambria and Silestone surfaces and the rest of our brand partners across remodeling work. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. Call (866) 320-2646 for a free project estimate and design consult. Calls are answered by a live person, 24/7, so you won’t sit in a voicemail.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch