A Groundwork company - serving San Francisco, CA
T

Therma-Tru Bathroom Remodeling in San Francisco, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Bathroom Remodeling: The San Francisco Owner’s Guide

A Therma-Tru bathroom door, frame or entry system typically costs $10,620 to $33,040 to replace and install as part of a full bathroom remodel in San Francisco, and most jobs can be scheduled within days, not weeks. The part usually announces itself before it quits: a door that drags on the threshold in Pacifica fog, a frame that swells in Noe Valley winter, or hinge screws that spin in soft wood after years of damp air. Owners find us after the door has started catching, sticking, or leaking at the frame, or after a general contractor on a different job told them to stop sealing it and replace it properly.

Call (866) 320-2646

Which Therma-Tru Models This Applies To

Therma-Tru bathroom and interior doors come in several families: the Fiber-Classic and Smooth-Star lines are the most common in San Francisco homes built or renovated since the 1990s, and the benchmark and decorative glass entry systems show up in remodeled Victorian and Edwardian flats. The right part depends on the door slab and frame series, not just the width. A Fiber-Classic 36-inch slab and a Smooth-Star 36-inch slab look identical from the hallway but use different hinge preparations, different threshold profiles and different sill specs. Before we quote, we measure the rough opening, the slab thickness (Therma-Tru fiberglass doors run 1-3/4 inches standard, but older stock runs different), the hinge pattern, and check the label inside the hinge jamb or on the slab edge.

On OEM versus aftermarket: for frames, sills and threshold components, the OEM Therma-Tru part is the safe call because the profiles are proprietary and a generic threshold will not seal correctly in San Francisco’s damp air. For hinges and weatherstripping, a quality aftermarket equivalent works fine and costs less. We are an independent San Francisco service provider and not affiliated with Therma-Tru, so every part we source is matched to your actual door, not guessed from a catalog.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Bathroom Remodeling Is Failing

  • Door drags or binds on the threshold. Fiberglass slabs can warp when the frame holds moisture, and a dragging slab is often the first visible sign of a swelling jamb.
  • Swollen or soft frame at the bottom corners. San Francisco’s marine air drives moisture into the lower jamb, where the sill and frame meet. Once the wood core is soft, sealing won’t fix it.
  • Hinge screws that spin or won’t hold. Repeated damp-dry cycles chew out the hinge holes in older frames. If two or more hinges are loose, the frame is usually the culprit, not just the screws.
  • Daylight or draft at the frame edges. A gap that wasn’t there before means the frame has moved or the weatherstripping has compressed. Both need attention before the bathroom remodel continues.
  • Water staining or bubbling paint around the door. This points to a failed threshold seal or flashing. Left alone, it spreads into the adjoining wall.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A bathroom door replacement and install as part of a San Francisco bathroom remodel typically runs $10,620 to $33,040, depending on whether you’re swapping the slab only, the full frame and threshold, or integrating the door into a larger bathroom build. The range reflects door series, glass options, finish, and site conditions like plaster walls or non-standard openings common in older San Francisco homes.

What drives the higher end: full frame replacement, decorative glass, custom sizing, or coordinating the door with a broader remodel that includes vanity and tile work. Parts and labor are itemized separately in the written quote, so you see exactly what the door, frame and labor cost before anyone starts. Every install we do carries the 730-Day Done Right Promise, and pricing is upfront with no surprise change orders once work begins.

DIY or Call Us?

You can safely check the label inside the hinge jamb, measure the slab width and thickness, and confirm whether the hinge screws spin. That’s the information we need to source the right part. What you shouldn’t do yourself is force a swollen frame, cut a frame back into plaster walls, or try to re-flash a threshold to stop a leak. In a bathroom, a failed threshold seal lets water into framing and subfloor, and that damage costs far more to repair than the door did. When the frame is soft or the leak is active, call us at (866) 320-2646 and we’ll look at it. Our technicians have up to 12 years of experience and can usually tell you what’s failed in the first visit.

FAQs

How long does a Therma-Tru bathroom door last in San Francisco? Expect 15 to 25 years for a fiberglass slab in a protected opening, and closer to 10 to 15 in a damp bathroom or near the coast where fog and marine air work on the frame. The slab usually outlasts the frame.

Can the door be repaired instead of replaced? Yes, if the slab is sound and only the hinges or weatherstripping have failed. If the frame is soft or the threshold is leaking, replacement is the honest answer. Call (866) 320-2646 for a free estimate and we’ll tell you which one you’re looking at.

How long does the swap take? A slab replacement is typically a single visit. A full frame and threshold replacement usually runs one to two days, longer if the opening needs repair. Our estimates are written before work starts, so you know the timeline in advance.

How do you source the part? We measure your specific door, check the series and label, and order the matching OEM or verified equivalent component. Nothing is guessed, and every part is confirmed against your actual rough opening before we schedule the install.

We also work with KraftMaid, Cambria and Silestone on bathroom and kitchen finishes when a remodel includes cabinetry or counters, so you can coordinate the door replacement with the rest of the room.

Ready to stop fighting a sticking door? Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate and design consult. We’ll measure the opening, confirm the part, and put the price in writing before any work starts. Calls are answered by a live person 24/7, and every project is backed by the 730-Day Done Right Promise.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch