Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The San Francisco Owner’s Guide
Therma-Tru fence installation in San Francisco typically runs $4,130 to $10,620 installed for the fencing components that pair with a Therma-Tru entry system, and most standard runs are completed in a single visit. We install Therma-Tru-compatible gate frames, hardware, posts, and threshold transitions, match the finish to your existing door or fence line, and back the work with our 730-Day Done Right Promise. Groundwork Construction Co. of San Francisco is an independent service provider, not affiliated with Therma-Tru.
Owners rarely call us about the fence itself. They call because a gate stopped latching against a Therma-Tru entry, a post settled and pulled the frame out of square, or the threshold transition at the door has been letting Bay fog moisture into the assembly for two winters. On San Francisco’s sloped lots, that settlement shows up fast, especially on the west side.
Which Therma-Tru Models This Applies To
Therma-Tru builds entry doors and door systems, not standalone fences. So “Therma-Tru fence installation” in practice means fencing and gate assemblies that need to work with their doors: the sidelight frames, the threshold, the mullions, and the exterior trim line where the fence meets the house. If you’re matching a new fence to an existing Therma-Tru door, the specs that matter are the sill height, the rough opening, and the exterior casing profile.
Start by finding the Therma-Tru model label. It’s usually on the door slab edge or in the hinge-side jamb, and it lists the series and the config (single, sidelite, double). Therma-Tru’s main lines – Classic-Craft, Smooth-Star, Fiber-Classic, and the Fiber-Classic series under the Pulse program – each use slightly different exterior trim depths, so the fence gate has to be set back the right amount to clear the casing without trapping water.
On the OEM-vs-aftermarket call: for the door-side components, stay with Therma-Tru parts. Their sill extenders and trim profiles are sized to their frames, and a cheaper generic equivalent usually means a visible gap or a moisture channel that shouldn’t be there. For the fence posts, pickets, and gate hardware itself, a quality aftermarket product is fine. Talk to us and we’ll spec the right combination.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Fence Installation Is Failing
These are the five things we see most in San Francisco, and what’s usually underneath them:
- Gate won’t latch against the door frame. Post settlement or rot at the base has moved the gate 1/4 inch or more out of square. On San Francisco’s hillside lots, we see this most on the north-facing side where soil stays damp.
- Daylight or a gap at the threshold transition. The sill and fence line have separated. In San Francisco, this is almost always fog moisture wicking into the joint and swelling the material, or an install that skipped a proper flashing layer.
- Visible rust or bubbling at the gate hardware. The hardware has reached the end of its finish life faster than the fence because the salt air off the bay attacks it first. Hardware has the shortest lifespan of anything in the assembly.
- Loose or wobbly posts. The post footing has lost compaction, or the post was set in a location where the soil drains poorly. A wobbly post pulls the whole gate out of alignment.
- Paint or finish peeling on the door-side trim. The fence install left a moisture trap against the Therma-Tru casing. This is the “compatibility gotcha” owners ask us about most – the fence looks fine, but it’s damaging the door finish from the outside in.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Therma-Tru-compatible fence installation in San Francisco runs $4,130 to $10,620 installed. That’s the full range for standard runs from roughly 10 to 30 linear feet with a gate, and it’s what we quote most of the time.
Here’s what drives the high end of the range in San Francisco: post footings on sloped lots, complex gate hardware, matching to a specific Therma-Tru casing profile, and the extra flashing work that a hillside property needs to keep fog moisture out of the assembly. Line-item pricing means you see the fence, the posts, the footing work, and the door-side transition as separate lines, so nothing hides in a lump sum.
Upfront pricing, no surprises. The number you see is the number you pay, and the work is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
An owner can safely check three things: whether the gate latches square, whether there’s any gap at the sill or threshold, and whether the posts move when you push on them. Those observations are useful when you call for a quote.
What goes wrong with DIY on this part is the door-side transition and post footings. Setting a post to the right depth in San Francisco’s sandy, sloped soil takes compaction and proper footing design, and a 1/4-inch error here becomes a 1-inch gate sag in a year. The post is also heavy: a full post and gate assembly can weigh well over 100 pounds, and getting it into a hillside footing without help is where most homeowners get hurt. This is a two-person job with proper setting tools.
Call (866) 320-2646 and we’ll spec the right Therma-Tru-compatible setup for your door and site. Most of these jobs are completed in a single visit, and estimates are free.
FAQs
Plan on 10 to 15 years for the fence components and 6 to 10 years for the gate hardware, with the hardware being what wears out first because of the salt air. The door-side transition can last much longer if it’s flashed correctly at install. Call (866) 320-2646 and we’ll walk through the expected lifespan for your specific setup.
Sometimes. A gate that just needs re-hanging or a post that needs re-setting is a repair. If two or more bays are out of alignment or the posts are rotting at the base, replacement is usually the better money. We’ll be honest about which one you’re looking at during the estimate.
Most standard runs are finished in a single visit, and larger or hillside jobs may take two days. The estimate gives you the exact timeline for your property.
We source through verified suppliers and match to your door’s model label, so the sill, trim, and transition fit your Therma-Tru frame. We don’t carry parts on a truck; each order is spec’d to your job. Calls are answered by a live person 24/7, so call (866) 320-2646 whenever a question comes up.
We also install systems from KraftMaid, Cambria, and Silestone on other projects, but on a Therma-Tru entry fence project, the door-side match is the whole game.
Trusted brand partners across every service category: Groundwork Construction Co. of San Francisco works with a curated set of top-tier brands. Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked on every project. Right now we’re offering $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult.
Call (866) 320-2646 to schedule your free estimate. A live person answers 24/7, and we’ll come out, spec the right Therma-Tru-compatible fence installation for your San Francisco property, and give you a written line-item quote you can trust.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.