A Groundwork company - serving San Francisco, CA
T

Therma-Tru Kitchen Remodeling in San Francisco, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Kitchen Remodeling: The San Francisco Owner’s Guide

Therma-Tru doesn’t make kitchen cabinets or counters, so when a San Francisco homeowner searches “Therma-Tru kitchen remodeling,” what’s really failing is almost always the French door or patio door that anchors the kitchen and opens to a deck or yard. We install and service those doors in San Francisco kitchens, and a full kitchen remodel here runs $16,520 – $53,100, with door replacement folded into that scope or quoted on its own. You’ll usually find out something’s wrong when the door drags, the lock won’t catch, or the glass fogs from the inside on a cool Bernal Heights morning.

Call (866) 320-2646

Groundwork Construction Co. of San Francisco is an independent service provider. We’re not affiliated with Therma-Tru, but our technicians have up to 12 years of experience working with their door lines, and every project carries our 730-Day Done Right Promise.

Key Takeaways:

  • Most “Therma-Tru kitchen” jobs mean a hinged or sliding patio door, not cabinetry.
  • A failed door in San Francisco’s marine air often fails at the weatherstrip and hinges first.
  • Upfront pricing, no surprises: you get the number before we start.
  • 0% financing for 18 months and $1,000 off projects over $10,000 apply.

Which Therma-Tru Models This Applies To

Therma-Tru’s kitchen-relevant products are hinged patio doors (their Fiber-Classic, Smooth-Star, and Classic-Craft lines) and sliding glass doors. Each line uses different hinge patterns, sill designs, and lock hardware, so the part that fits a Smooth-Star won’t drop into a Classic-Craft without checking. To identify yours, pull the manufacturer’s label from the door edge or the top of the slab, then measure the slab width, height, and thickness. Slabs commonly run 2-3/4 inches thick on hinged units, but oversized and custom openings in older San Francisco houses throw that off, so measure rather than assume.

On the OEM-versus-aftermarket question: genuine Therma-Tru parts ensure a factory fit but carry a dealer lead time. Quality aftermarket equivalents (sills, weatherstrip, multipoint lock hardware) are widely made to spec and often match the original dimensions exactly. For a decorative glass lite, we lean OEM; for wear items like seals and sweeps, a good aftermarket match gets you back to a working door without the wait. We don’t stock parts or carry inventory, so we source to your model.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Kitchen Remodeling Is Failing

These are the symptoms we hear most in San Francisco, and what each one points to underneath.

  • The door drags or scrapes the frame. Usually a worn hinge or a slab that has shifted as the frame settled. San Francisco’s older housing stock makes settling common.
  • Drafts or water at the threshold. The sill or weatherstrip has flattened out. Fog belt neighborhoods like the Sunset and Richmond drive that wear faster than inland areas.
  • Condensation or fogging between panes. The sealed glass unit’s seal has failed, so the insulating gas escaped and moisture got in. This can’t be wiped away from inside.
  • The lock won’t latch or the handle is loose. Multipoint or mortise hardware has worn or gone out of alignment with the strike plate.
  • The door won’t stay shut or swings on its own. The threshold and hinges are out of square with each other. Realigning one without the other is a temporary fix.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For San Francisco kitchens, a full remodel with door work sits in our $16,520 – $53,100 range. A smaller kitchen refresh runs $10,620 – $23,600, and a standalone door replacement inside a kitchen project is quoted as part of that scope. What drives the number: door size and line, whether you go OEM or aftermarket on the glass, and whether the frame needs re-squaring. Larger scope pieces in a kitchen job price separately too – cabinet installation at $4,720 – $15,340 and countertops at $2,360 – $7,670.

We quote parts and labor separately so you see what the hardware costs and what the install costs. The work is covered by our 730-Day Done Right Promise. Financing at 0% for 18 months is available, and you get $1,000 off projects over $10,000.

DIY or Call Us?

You can safely check the obvious things: run a hand along the weatherstrip for gaps, test the lock, and look for fogging between panes. Replacing weatherstrip, a sweep, or a standard handle is within reach if you have the exact model number. Where it goes wrong is the sealed glass unit and the frame itself – a mis-ordered lite won’t fit, and re-squaring a door that’s also settling is a job that needs eyes on the opening. For glass and structural work, call us.

Here’s the honest split: wear items are a fine weekend project; anything load-bearing or sealed is not. Call (866) 320-2646 and we’ll walk you through what’s actually failing before you spend a dime.

FAQs

How long does a Therma-Tru patio door last? A well-installed Therma-Tru door lasts 20 to 30 years, but in San Francisco’s salt air and fog, the weatherstrip and sill wear out in 5 to 10 years – that’s what fails first, not the frame.

Can the failing part be repaired instead of replaced? Often yes. Weatherstrip, sweeps, hinges, and hardware can be swapped. A fogged sealed glass unit can’t be repaired – the seal is gone – so that’s a replacement.

How long does the swap take? A hardware or weatherstrip swap is a few hours. A full door replacement is typically one day once the right part is on site. Call (866) 320-2646 for an exact timeline.

How do you source the part for my model? We pull the manufacturer label from your door to match the line and dimensions, then order OEM or a spec-matched aftermarket equivalent based on what fails. Call (866) 320-2646 to get started.

We also work with KraftMaid, Cambria, and Silestone on the kitchen side, so the door and the cabinetry come together under one scope – from foundation to finish line.

Ready for a straight answer on what’s failing and what it costs? Call (866) 320-2646 for a free estimate. A live person answers, 24/7.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch