A Groundwork company - serving San Francisco, CA

Tremron Roofing in San Francisco, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Roofing: The San Francisco Owner’s Guide

We install Tremron-compatible roofing and roof components across San Francisco, with typical roof repairs running $470 – $2,125, full roof replacement at $9,440 – $23,600, and tile roof repair at $710 – $2,950. Most Tremron roof problems we see in San Francisco start small: a missing or cracked piece after a wind event, a granule trail in the gutter, or a ceiling stain that shows up after the first real rain of the season. Owners usually spot the failure by looking up, not down.

Call (866) 320-2646

The symptom that brings people to us is almost always the same. A storm rolls through the Sunset or the Richmond, a few shingles or tiles lift, and within a week there’s a brown ring on the ceiling. Or they’ve been on the roof with a tube of sealant every fall and want to stop patching. We get it. Here’s what actually fails, what the part costs, and where DIY stops being worth it.

Which Tremron Models This Applies To

Tremron makes roofing shingles and tiles, and the part you need has to match the profile, the exposure, and the color lot of what’s already on your roof. Shingle lines are identified by the bundle wrapper or the imprint on the back of a loose shingle. Tile profiles are matched by measuring the field tile width and the finished exposure – generally 9 to 13 inches depending on the series. Color matching matters too: Tremron runs color lots, and a new bundle of “the same color” from a different lot can read noticeably different on a south-facing slope.

On the OEM-versus-aftermarket question, we’re straightforward about it. For a small repair, a quality aftermarket equivalent that meets the same Wind and impact ratings is often fine and costs less. For a replacement where the new field has to tie into existing courses, OEM is the safer call because the profile and exposure match by design. We source the right part through our network of verified suppliers – we don’t claim to stock Tremron parts or carry them on a truck. If your roof is part of a broader exterior job, we also work with James Hardie siding and KraftMaid, Cambria, and Silestone on the interior side, so a failed roof doesn’t have to mean a second contractor.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Roofing Is Failing

  • Granule loss in the gutters and downspouts. Tremron shingles shed some granules naturally in the first year or two. A steady trail after year five means the asphalt is aging out, and the surface is thinning toward the mat.
  • Lifted or cracked shingles after wind. San Francisco’s exposed hillside blocks see gusts that pop nail heads and lift course edges. Once a shingle loses its seal-down, water gets under the overlap instead of running off it.
  • Cracked or slipped tiles. Tremron clay and concrete tiles hold up well, but a slipped tile exposes the underlayment to UV and rain. A single tile can look cosmetic and still be a leak path.
  • Ceiling stains or attic moisture. A brown ring on a second-floor ceiling almost always traces back to a compromised flashing point or a failed course, not the ceiling itself. It shows up in the rainy season, then dries and hides.
  • Moss and dark streaking. Fog-heavy neighborhoods like the Outer Sunset and Inner Richmond feed moss and algae. It’s usually cosmetic, but roots and trapped moisture shorten the life of the roof underneath.

One San Francisco reality worth naming: the marine layer keeps roofs damp for long stretches and the summer fog cycle bakes and cools them daily. That cycle is hard on sealant and flashing. Roofs here fail at the penetrations and edges first, not in the middle of the field.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s the honest pricing for San Francisco, installed:

Work Installed Range
Roof repair (patch, flashing, individual pieces) $470 – $2,125
Tile roof repair $710 – $2,950
Full roof replacement $9,440 – $23,600
Metal roof installation $17,700 – $47,200

What drives the range: roof size and pitch, how many layers need tearing off, the condition of the decking once it’s exposed, and how much flashing and detail work the job needs. Old San Francisco homes often hide surprises at the valleys and chimneys, and we price those in writing before we start. Parts-plus-labor is broken out line by line, so you see what the material costs versus the install. Every job carries our 730-Day Done Right Promise – if it’s not done right, we make it right. No-hassle upfront pricing means the number you see is the number you pay.

DIY or Call Us?

There’s a real split here. You can safely check from the ground with binoculars: look for lifted or missing pieces, cracked tiles, and granules in the gutter. You can look in the attic for daylight and staining. That’s the limit of safe DIY, and it’s genuinely useful – it tells you whether you have a small repair or a replacement.

What we don’t recommend is getting up on a steep-pitch San Francisco roof, especially a two-story or a Victorian with a high ridge. Fall risk is real, and most one-off patches fail again within a season because the real problem is the flashing underneath, not the shingle on top. For tile, walking the field wrong cracks tiles you can’t easily match. When the symptom points to a leak path or a course failure, that’s a call to a trained roofer. We answer live, 24/7, and our technicians are background-checked and arrive in uniform.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch