Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The San Francisco Owner’s Guide
Unilock is a premium hardscape brand, and its bathroom applications in San Francisco work best when the material is matched to the room’s actual moisture exposure and substrate. Installed Unilock bathroom remodeling in San Francisco typically runs $10,620 – $33,040, with smaller-powder-room scopes as low as $5,900 – $14,160. We are an independent service provider, not affiliated with Unilock, and we quote every job as an upfront, line-item number before a tool comes out of the truck.
Most owners discover a failing installation the same way. A hairline crack opens along a grout line near the shower pan. Or the tile over a concrete slab starts sounding hollow underfoot. In a San Francisco bathroom, that hollow click is usually the first sign floor movement has broken the bond, and it’s worth catching before water gets behind the tile.
Key Takeaways
- Unilock bathroom installations in San Francisco cost $10,620 – $33,040; small baths $5,900 – $14,160.
- Most failures trace to substrate movement and moisture, not the tile itself.
- We specify Unilock, Belgard and compatible hardscape lines based on the room, not the price sheet alone.
- Every job carries the 730-Day Done Right Promise, and we answer calls live, 24/7.
Which Unilock Models This Applies To
Unilock markets its paving and hardscape lines under series names, and the same series that performs beautifully on a San Francisco patio can be oversold for a wet bathroom floor. For interior use, the practical candidates are the brands’ porcelain-look and rectified-edge pavers – thinner profiles that sit flat, take a tight grout joint, and skip the cushion-sand-only install a driveway would use. On a small bathroom floor you’re typically working in the 12-by-12 or 12-by-24 range; on a curbless shower surround you want a fully rectified edge and a matte surface that grips.
Here’s the compatibility gotcha worth knowing: Unilock’s frost-resistant and “permeable” pavers are built for exterior freeze-thaw, and many are denser and heavier than a bathroom floor needs, while some thin overlay lines are designed for exterior bonding and shouldn’t be set over an interior framed floor without a proper substrate first. Match the series to the substrate and the moisture exposure, not just the look.
To identify the right part or product line, read the printed line name and color code off the original packaging or the underside of any loose piece, and measure face dimensions to the eighth of an inch. When original packaging is gone, a photo of the field tile next to a tape measure tells us most of what we need.
On the OEM-versus-aftermarket call: for Unilock-compatible hardscape, use genuine Unilock product where a bathroom floor touches water and aftermarket equivalents are only appropriate for hidden or non-visible repair work. This is where our curated brand partners matter – Belgard and Unilock are the two lines we lean on most for bathroom-plus-hardscape scopes, and we’ll tell you plainly which one fits your room and budget.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Remodeling Is Failing
- Hollow or drummy tile. You tap a tile and hear a dull echo instead of a solid click. That means the thin-set or mortar bed has separated from the substrate underneath, and water is already finding the gap.
- Grout cracks that come back after regrouting. A crack that reappears along the same line within a year points to movement underneath, not a bad grout job.
- Lipped or rocking pavers. One stone sitting proud of its neighbors or rocking underfoot means the substrate has shifted or dropped – common over older San Francisco framed floors that weren’t evaluated before install.
- Dark edges and grout staining near the shower or tub. Discoloration that won’t scrub out signals moisture trapped behind the tile, often because the waterproofing layer or perimeter seal failed.
- Cold, damp-feeling floors that stay that way. In San Francisco’s cool, foggy climate, a floor that never dries out between showers usually means the substrate isn’t draining or is holding water under the stone.
Replacement Cost & What’s Included
We quote installed, not per-square-foot mystery pricing. In San Francisco, a full bathroom remodel using a Unilock-compatible hardscape floor and wall package runs $10,620 – $33,040, a small bathroom remodel runs $5,900 – $14,160, and a walk-in shower installation runs $5,310 – $14,160.
| Scope | Installed range |
|---|---|
| Full bathroom remodel | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Shower replacement | $3,540 – $10,030 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Bathroom vanity installation | $945 – $3,540 |
What drives the spread: substrate condition (framed floor versus concrete slab), whether waterproofing is being corrected or replaced, accessibility upgrades, and whether you’re moving plumbing. Your line-item quote separates the material line from labor so you can see exactly what you’re paying. Every job is covered by the 730-Day Done Right Promise and backed by our upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely lift a loose tile or tap-test the floor to document what’s failing. What you shouldn’t do yourself on a wet-area floor is tear out and reset the substrate, the waterproofing, or any load-bearing floor structure. Each of those is where a weekend project turns into a $10,000 water-damage repair, and setting stone over an uncorrected substrate is the single most common cause of a repeat failure.
If you hear hollow tile or see a crack spreading, stop and call us at (866) 320-2646. We answer with a live person, 24/7, and we’ll schedule a free estimate and design consult so you have a written number to compare.
FAQs
A properly set Unilock-compatible stone floor over a corrected substrate, with intact waterproofing, should hold for 20-plus years. Longevity in San Francisco depends far more on what’s underneath the tile than on the tile itself – fog-belt moisture and older framed floors are the two factors that shorten life most.
Sometimes. A single cracked or hollow paver, or a failed grout and seal, can often be repaired without a full tear-out. But if the failure traces to a shifting substrate or failed waterproofing, a patch will fail again, so we inspect before we recommend.
A single-day repair of a cracked stone or grout fix is common. A full-floor reset takes several days, and a full bathroom remodel runs weeks, depending on substrate condition, waterproofing and material lead times. Most jobs are completed in a single visit only when the scope genuinely allows it.
We specify from our curated brand partners – Unilock and Belgard for hardscape, with KraftMaid, Cambria and Silestone available for the vanity side of the room – and match the series to your substrate and moisture exposure. We don’t carry stock parts on a truck, so lead times depend on the line; call (866) 320-2646 and we’ll confirm material availability as part of your free estimate.
Get a Free Estimate in San Francisco
Whether you’re resetting a failing bathroom floor or planning a full San Francisco bathroom remodel with Unilock-compatible stone, we’ll give you a written, line-item quote with upfront pricing and no surprises. Every project is backed by the 730-Day Done Right Promise, our background-checked, uniformed technicians, and live-person answering 24/7. Current standing offers include $1,000 off projects over $10,000 and 0% financing for 18 months. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.