A Groundwork company - serving San Francisco, CA

Unilock Windows & Doors in San Francisco, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Windows & Doors: The San Francisco Owner’s Guide

We install and service Unilock windows and doors for San Francisco homeowners, from single-unit replacements to full-house swaps, with most standard installs running $5,310-$17,700 depending on material, glazing, and opening count. Impact-rated units under San Francisco’s seismic and wildfire-adjacent glazing rules land higher, at $9,440-$29,500. Same-day service happens only on genuine emergency calls, not planned installations.

Call (866) 320-2646

Owners usually find out something is wrong the same way. One window in a Bayview or Sunset home won’t latch as the season shifts. A door drags on the threshold two months after install. The fog rolls in and condensation shows up between the panes, or the sash rattles in a wind gust off Twin Peaks. That’s when the search begins – and the question almost always becomes: what exactly fits my Unilock unit, and who can source it honestly here?

Groundwork Construction Co. of San Francisco is an independent service provider. We’re not affiliated with Unilock, but we’ve worked with their window and door lines across the city’s fog belt, hillside buildings, and pre-1940 stock, and we know what fails first and why.

Key Takeaways

  • Unilock-compatible window replacement in San Francisco runs $5,310-$17,700 installed; impact-rated units run $9,440-$29,500.
  • Most failures we see in San Francisco are hardware and weather-seal problems, not glass failures.
  • Match the model and series on the unit’s label before ordering – the wrong sash profile is the #1 ordering mistake.
  • Every install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right.

Which Unilock Models This Applies To

Unilock’s window and door lines span multiple series, and the crucial detail is that hardware, sash profiles, and glazing units are not cross-compatible between them. A handle set from one series will not fit another – the mounting hole centers and spindle depth differ, sometimes by only a few millimeters, which is enough to leave you with a loose, non-latching operator. The same goes for weatherstripping, sill plates, and screen frames.

The first thing we do on any San Francisco call is find the unit label. On Unilock windows it’s typically etched or stickered on the inside of the sash, the frame jamb, or the head. On doors it may be on the hinge stile or the threshold plate. The label carries the model, series, and production date – all three matter for getting the right part. If the label is gone or worn through (common in older Sunset and Richmond district homes after decades of salt air), we measure by profile: sash thickness, glass unit thickness, frame depth, and opening dimensions.

OEM versus aftermarket for Unilock is a real decision. For a standard single-hung or casement, a quality aftermarket sash or operator from a compatible manufacturer often costs 30-40% less and performs identically. For specialty units, impact-rated assemblies, or anything under an active manufacturer warranty, OEM parts keep the coverage intact – and that’s usually the right call. We quote both options and tell you which one we’d pick for your unit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Windows & Doors Is Failing

The symptoms below are the ones San Francisco homeowners actually call us about. Each one points to a specific part.

  • Handles, locks, or latches that no longer operate smoothly. The operator or hardware set has worn, or the spindle sits loose in a stripped hole. Salt air accelerates the corrosion inside the mechanism faster than most owners expect – the outside looks fine while the inside is seizing.
  • Condensation or fogging between the glass panes. The sealed insulating glass unit has failed at its perimeter seal. San Francisco’s moisture, driven by fog off the ocean and the temperature swing between the west and east sides of the city, stresses that seal more than a dry inland climate would.
  • Drafting, whistling, or cold air at the frame. The weatherstripping has flattened or the sill seal has degraded. This is the most repairable of the list – a fresh weatherseal kit often resolves it without replacing the unit.
  • A door that drags on the threshold or won’t sit square in the frame. Either the threshold is worn, the hinges have sagged, or the frame has shifted. In older San Francisco homes on piers or slab, foundation movement plays into this more than most owners realize.
  • Sash that rattles or won’t stay open. The balance or channel is worn. It’s a common failure on double-hung units 10-plus years old, and it’s a safety concern upstairs.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Unilock-compatible window and door work actually costs in San Francisco, with parts and labor bundled. We quote upfront and in writing – the number you see is the number you pay.

Scope San Francisco installed range
Standard window replacement (per unit or small job) $5,310-$17,700
Impact-rated window installation $9,440-$29,500

The range moves on four things: material (vinyl, aluminum-clad, wood), glazing (single, dual, impact-rated), opening count, and access – a third-floor hillside window in Noe Valley takes more labor than a ground-floor one. Parts are quoted line-item so you see exactly what you’re paying for the hardware and what you’re paying for the labor.

What’s included: measurement and part sourcing, removal and disposal of the old unit, installation, sealing, and the 730-Day Done Right Promise on the workmanship. If it’s not done right, we make it right. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.

DIY or Call Us?

Some window and door work is genuinely owner-friendly. You can safely check the weatherstripping, clean and lubricate the hardware with a dry silicone spray, tighten loose handles and latch screws, and feel for drafts with the back of your hand around the frame. Those five minutes of diagnosis often tell you whether you need a part at all.

What goes wrong with DIY: ordering the wrong series part and finding it won’t seat, breaking a sealed glass unit while prying a sash, or replacing a door threshold and losing the seal entirely. And on a multi-story San Francisco building, replacing a sash or an entire unit from a ladder or fire escape is a fall risk – hire a trained professional. A misinstalled window also voids whatever warranty came with the unit, and that’s a bill you don’t want.

Call (866) 320-2646 and we’ll tell you straight whether you’re looking at a $40 weatherseal kit or a full unit swap. Live person, 24/7 – no voicemail black holes.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch