Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The San Francisco Owner’s Guide
Wellborn cabinet failures in San Francisco usually show up as a door that won’t stay closed, a drawer that scrapes the frame, or a finish that’s blistering near the sink. We install and repair Wellborn-compatible kitchen components across San Francisco homes, with full kitchen remodeling typically running $16,520 – $53,100 installed and cabinet-specific work running $4,720 – $15,340. Most single-component replacements are scheduled within days, and every job is covered by our 730-Day Done Right Promise. Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with Wellborn.
Which Wellborn Models This Applies To
Wellborn’s lineup runs from the value-focused Aspire and Premier series up through the all-plywood Select and the frameless frameless-style lines, and each series uses different hinge boring patterns and drawer box profiles. Before you order anything, find the label inside the cabinet door or on the back of the drawer box; Wellborn prints the series and a finish code there, and that code is what determines whether your replacement door is a match or a near-miss.
Here’s the gotcha that catches San Francisco owners: two doors can look identical but differ in overlay (how much of the frame the door covers). A 1/2-inch and a 5/8-inch overlay are not interchangeable on the same hinge, and swapped doors will either bind against the next cabinet or leave a visible gap. Measure your existing overlay at the hinge side before you commit, and measure the door width and height down to 1/16 inch, since Wellborn’s cabinet door sizes don’t always match the opening’s nominal dimensions.
On the OEM-versus-aftermarket call: for the cabinet box and doors, match Wellborn’s series and finish code exactly. For hinges, drawer slides, and shelf clips, a quality aftermarket equivalent from a well-known hardware maker often outlasts the factory part, and we’ll tell you honestly when that’s the smarter spend. KraftMaid, Cambria, and Silestone are among the other brands we work with.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Kitchen Remodeling Is Failing
Cabinet problems announce themselves slowly, then all at once. Here’s what San Francisco homeowners describe when they call us:
- Doors that drift open or slam shut. The hinge cup or its mounting screws have loosened, usually from a soft-close damper that’s worn out. A cabinet door opens and closes thousands of times a year; the damper is the first thing to give.
- Drawers that scrape or won’t glide smoothly. Undermount slide rollers wear and the cabinet box’s bottom panel can swell from moisture. In a city where kitchens sit close to the fog line, this shows up faster than owners expect.
- Finish blistering or peeling near the sink and dishwasher. San Francisco’s marine air and kitchen humidity work on the finish edges. Once the substrate is exposed, the failure spreads.
- Cabinet box out of square, doors won’t line up. Often a sign of settling in older San Francisco homes, or a cabinet that was never shimmed level on install. Re-hanging doors won’t fix what a racked box broke.
- Soft spots, sagging shelves, or a musty smell. Water has gotten behind the cabinet or into the toe kick. This one needs a look before you replace anything, because the source of the moisture is the real problem.
Replacement Cost & What’s Included
Cabinet-level work in the San Francisco market breaks down like this. These are installed ranges, not material-only pricing, and they’re the same numbers we quote from.
- Cabinet installation (full set): $4,720 – $15,340
- Countertop installation: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Kitchen island installation: $3,540 – $11,800
- Full kitchen remodel: $16,520 – $53,100
The range moves with cabinet count, the series you’re matching, whether countertops and backsplash come out with the cabinets, and how much the room’s plumbing and electrical need to shift. Every quote is line-item, upfront, and fixed. The number you see is the number you pay, and the work carries our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can check safely yourself. Open each cabinet and look for water stains, test every hinge and slide by hand, and measure your overlay and door dimensions so you know what you’re dealing with. Writing down the series and finish code from the label is a five-minute job that saves a lot of back-and-forth.
Where DIY goes wrong: re-hanging doors on a cabinet box that’s out of square, cutting a new countertop opening without knowing what the cabinet can carry, or chasing a moisture problem by replacing the panels it damaged. Cabinet boxes are heavy, they’re often attached to each other and to the wall, and moving one wrong can damage the wall finish or the plumbing behind it. That’s the point where a trained eye saves you money. Our technicians have up to 12 years of experience, arrive in uniform, and every one of them is background-checked. Call (866) 320-2646 and we’ll walk you through what’s actually failing before you spend anything.
FAQs
A well-made cabinet box typically holds up 20 to 30 years, but the moving parts and the finish age faster than the box. In San Francisco, where marine air and kitchen humidity are a constant, hinges, dampers, and drawer slides are the first to go, often within 8 to 12 years of heavy daily use. Call (866) 320-2646 and we’ll tell you which of yours are worth replacing versus repairing.
Often yes. Loose hinges, worn slides, sagging shelves, and small finish chips are usually repairable for a fraction of replacement cost. Box damage from water or a cabinet that’s gone out of square is the point where replacement makes more sense, and we’ll say so plainly rather than sell you a full set you don’t need. Call (866) 320-2646 for a free estimate.
A single door or drawer replacement is usually a same-visit job. A full cabinet set in a typical San Francisco kitchen runs several days to a couple of weeks depending on size, countertops, and whether plumbing or electrical has to move. We give you a written schedule before we start and stick to it. Call (866) 320-2646 to get your timeline priced.
We identify the part by the series and finish code on the label inside your cabinet, then confirm dimensions and overlay before anything is ordered. We don’t claim to carry Wellborn parts in stock or on a truck, so the fit check happens up front, not after delivery. We also work with KraftMaid, Cambria, and Silestone on the same kitchen scope. Call (866) 320-2646 to get your free estimate and design consult.
Get Your San Francisco Kitchen Priced
Whether it’s one failing hinge or a full Wellborn kitchen you’re ready to redo, we’ll give you an upfront, line-item number and stand behind it with our 730-Day Done Right Promise. Our technicians have up to 12 years of experience, arrive in uniform and background-checked, and someone answers the phone 24/7. Ask about 0% financing for 18 months and $1,000 off projects over $10,000. Call (866) 320-2646 to schedule your free estimate in San Francisco.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.