A Groundwork company - serving San Francisco, CA

Brick Paver Driveway in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Brick Paver Driveway in San Francisco, CA

A brick paver driveway in San Francisco typically costs between $18 and $32 per square foot installed, and most residential driveways here run 400 to 800 square feet. That puts a full clay-brick driveway somewhere between $9,000 and $24,000 depending on grade, base conditions and the slope of your lot. We build these as a complete system, not just a surface: excavation, compacted aggregate base, edge restraint, then pavers set and finished to shed water away from your garage and foundation.

Groundwork Construction Co. of San Francisco handles brick paver work as part of our full Driveway & Pavers scope, from foundation to finish line. We measure and photograph the base before a single paver goes down, and everything sits under our 730-Day Done Right Promise. Call (866) 320-2646 for a free estimate with no pressure and no hidden line items.

Brick pavers make particular sense in this city. Many San Francisco lots sit on the sand-and-clay mix that runs through the Sunset and Richmond districts, and a rigid concrete slab tends to crack where that soil settles unevenly. A properly built paver driveway flexes instead of failing. If a single brick ever chips, we pull it and set a replacement without breaking into the rest of the driveway.

Key Takeaways

  • Brick paver driveways in San Francisco run roughly $18 to $32 per square foot, or $9,000 to $24,000 for most homes.
  • A proper build starts with a compacted aggregate base that handles our clay and coastal soils; skipping it causes settling within a season or two.
  • Paver joints and perimeter restraints matter more than the surface bricks; mistakes here lead to shifting near fog-driven moisture.
  • Work is covered by the 730-Day Done Right Promise, with upfront pricing and 0% financing for 18 months.

When You Need a Brick Paver Driveway

People call us about a paver driveway when they’ve reached the end of patching, and the driveway has stopped being a surface and started being a liability. Here are the situations we see most in San Francisco:

  • Concrete cracking through the middle. A slab that cracked along a tree root or where the subgrade settled in the Richmond district will keep cracking no matter how many times it’s patched. A flexible paver system opens and closes with the ground instead of splitting.
  • Pooling water against the garage door. San Francisco’s flat-topped slopes and tight setbacks can leave water sitting where the driveway meets the garage. We grade the base to shed water away, which is a base issue that brick pavers let us correct.
  • Drainage after fog and rain. Fog-heavy weeks leave stone slick and standing water common. A paver driveway with a correct joint and slope drains far better than a sealed concrete surface, and stays grippier underfoot.
  • Heaving and weeds at the joints. If a driveway was set without a proper base or joint sand, freeze-and-moisture cycles and tree roots push pavers out of alignment. Rebuilding the base solves what resealing never will.
  • You want a look that complements the house. Many San Francisco homes are Edwardian and Victorian with period details at the street. Brick pavers in a herringbone or running-bond pattern create a finished appearance a plain slab can’t.
  • Selling and curb appeal. If you’re preparing to list, a driveway with a clean paver pattern reads far better in listing photos than faded, patched asphalt.

Our Brick Paver Driveway Process

We run the same sequence on every job, and we walk you through it before we start so there are no surprises mid-project.

  1. Site visit and measurement. We measure the footprint, check the slope toward the street and the garage, and inspect the subgrade. If your property sits on sand or expansive clay, we test how it holds moisture before recommending a base depth.
  2. Written scope with line-item pricing. You get a clear number per component (excavation, base, edging, pavers, finishing) so you can compare our bid to others without guesswork. Upfront pricing, no surprises.
  3. Excavation and base prep. We remove the old surface, dig out to the needed depth, and install a compacted aggregate base in lifts, then check slope with a laser level to shed water away from the house. This step determines whether the driveway lasts 15 years or 4.
  4. Edge restraint and paver setting. A plastic or metal edge system locks the field, then pavers are laid in the chosen pattern. We check that joints are even and line lengths stay true from the street to the garage.
  5. Cutting at the curb and hard edges. We cut along the street, corners and curb transitions with a wet saw for clean finished lines, then compact and sweep in joint sand.
  6. Final walkthrough. We walk it together, test drainage at the low points, and confirm you’re satisfied. Everything is logged under the 730-Day Done Right Promise, so if something settles within two years, we make it right.

We use a curated set of brand partners across our work, from James Hardie and KraftMaid to Cambria, so the materials we specify hold up and carry the manufacturer’s backing. Our technicians arrive on every job background-checked and in uniform, and our calls are answered by a live person 24/7 – a real person picks up, even on Sunday night when you’re looking at a cracked slab and deciding who to call.

Brick Paver Driveway Pricing in San Francisco

Most brick paver driveways we quote in San Francisco land between $18 and $32 per square foot, installed and finished. For a typical 500-square-foot driveway, that’s roughly $9,000 to $16,000 all-in. Here’s how the components break down:

Component Typical cost range
Excavation and old surface removal $3 – $6 per sq ft
Compacted aggregate base $4 – $7 per sq ft
Clay brick or concrete pavers (material) $5 – $10 per sq ft
Edge restraint, setting sand, compaction $2 – $5 per sq ft
Cutting and finishing at curbs and edges $1 – $3 per sq ft

Several factors shift the price. Clay brick runs higher than concrete pavers but holds color better over decades. Herringbone and basketweave patterns take more cuts and labor than a simple running bond. A steep driveway or one with tight access for material delivery in a dense San Francisco neighborhood adds handling time. So does a deep base build if your subgrade is weak or poorly drained, or a driveway that needs a new concrete apron at the street.

We give you a written estimate with these components broken out. That way you can see why one bid is $11,000 and another is $19,000 for what looks like the same driveway. If you’re comparing the value of pavers against a poured slab, our team can walk you through both on the call. Financing is available at 0% for 18 months, and projects over $10,000 qualify for $1,000 off. Call (866) 320-2646 for a free estimate and design consult.

What Makes a Brick Paver Driveway Last in San Francisco?

Three things: the base, the drainage, and the edge.

The base is where most failures start. Driveways in Glen Park, Noe Valley and parts of the Mission sit on soils that shift with our wet winters and dry summers. If the contractor skips a proper compacted base, the pavers settle within a season and the joint lines go crooked. We dig to depth and compact in lifts so the ground below won’t move on you.

Drainage is the second. San Francisco’s rainy season funnels water toward a driveway’s low point, often right at the garage. We check where water wants to go before we lay anything, and we slope the driveway to shed it away from the door. If your garage sits below grade, we’ll talk through a channel drain or a small apron so the water goes where it needs to.

Edge restraint is the third and the one most often skipped. Perimeter edging locks the field in place; without it, pavers walk toward the street over time. We set a proper edge on every job.

On materials, we use a curated set of brand partners. If you’re also planning a siding or kitchen project while the driveway is torn up, our team can align James Hardie and KraftMaid work under the same schedule so you’re not managing two contractors. Look at the full Driveway & Pavers service in San Francisco for the wider picture. We handle driveway and paver work as one system, so the driveway, apron and front walk all match. And when you’re ready to return to the main page, more about our home services is here.

Do Brick Pavers Work on Sloped or Tight San Francisco Lots?

Yes, and they often work better than a poured slab. Sloped driveways in Noe Valley, Bernal Heights and the hillside blocks off Twin Peaks benefit from a paver build because the surfaces flex and the base can be stepped to the grade. A rigid slab on a steep grade tends to crack at the transition. Paver systems handle slope without cracking.

Tight lots require more cutting and a different setting pattern at corners. We account for that at the estimate so you aren’t surprised by a cut fee later.

How Long Does a Brick Paver Driveway Take?

Most single-car driveways in San Francisco take about 3 to 5 working days once the base and materials are ready. A 500-square-foot driveway with a standard base is typically a single visit for excavation and base, then one or two days for setting and finishing. Larger or more sloped lots add days. Rain in the forecast pushes the schedule, so we build that in rather than promise a date we can’t keep.

You’ll get a firm start and finish window in writing. Calls come in 24/7 and a live person answers, so if something shifts mid-project you hear it from us, not from a voicemail.

FAQs – Brick Paver Driveway

How much does a brick paver driveway cost in San Francisco?

Most brick paver driveways in San Francisco cost between $18 and $32 per square foot installed, or roughly $9,000 to $16,000 for a typical 500-square-foot driveway. Clay brick and complex patterns sit at the higher end, and easier access or simpler patterns sit lower. Call (866) 320-2646 for an exact quote – estimates are free and we break the price out line by line.

Is a brick paver driveway worth it compared to concrete?

For many San Francisco homes, yes. Pavers cost more upfront than a poured slab, but they flex with our clay and coastal soils instead of cracking, and a single damaged brick can be replaced without breaking up the driveway. Over decades, the repair cost you avoid usually outweighs the initial difference. Call us if you want to compare both options on your lot before deciding.

Can you fix a settled or uneven paver driveway without starting over?

Often, yes – if the base underneath is sound. If pavers settled because the base was skipped, we’ll explain the honest options after an on-site look, including a full re-base when one is needed. Either way, the result is covered by the 730-Day Done Right Promise, so if something settles within two years we make it right. Call (866) 320-2646 to schedule a look.

Do you handle drainage when the driveway meets the garage?

Yes, on every job. We inspect where water collects before we quote, slope the pavers to shed it away from the garage door, and recommend a channel drain or apron when the lot’s grade won’t otherwise cooperate. San Francisco’s rainy season will find the low point, so we plan for it ahead of time. Call for a free estimate and we’ll walk the slope with you.

Do you offer financing on a paver driveway?

Yes. We offer 0% financing for 18 months, and projects over $10,000 get $1,000 off. That’s in addition to the free project estimate and design consult. Call (866) 320-2646 to talk through which promotion fits your project.

Can you answer the phone when I call after hours?

Yes. A live person answers our phone 24 hours a day, 7 days a week – no voicemail, no waiting until Monday. If you’re looking at a cracked driveway on a Sunday evening, someone will pick up.

Schedule a Brick Paver Driveway Estimate in San Francisco

Brick pavers give you a driveway that holds up to San Francisco’s soils and weather and shows better from the street than a cracked slab ever will. Groundwork Construction Co. of San Francisco builds it from the base up, with upfront pricing, live phone answers around the clock, background-checked uniformed technicians, and the 730-Day Done Right Promise behind every job. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available.

Call (866) 320-2646 for a free estimate. We’ll measure your lot, talk through patterns and drainage, and hand you a written number you can compare side by side.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.

Need Construction help in San Francisco? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch