A Groundwork company - serving San Francisco, CA
Groundwork Construction Co. of San Francisco construction team

Chain Link Fence Cost Per Foot in San Francisco - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Chain Link Fence Cost Per Foot in San Francisco: Real Numbers for Steep Lots and Salt Air

Chain link fence in San Francisco typically runs $4,130 to $10,620 for a standard residential installation, which works out to roughly $35 to $70 per linear foot once posts, footing work, tension hardware and cleanup are counted. The per-foot number you see quoted online rarely survives contact with an SF hillside lot, and coating spec matters more here than almost anywhere in the country. Call (866) 320-2646 for a free, no-pressure estimate on your actual property.

Here’s why the national averages mislead. Chain link is the most corrosion-vulnerable fence material you can install a half mile from the Pacific, and standard galvanized fabric on the west side of the city starts showing rust within 3 to 4 years without the right coating. Add the grading, the rocky soil, and the Planning Department’s rules on street-facing fences, and you’re pricing a completely different job than a flat suburban lot in the Central Valley.

What Actually Drives Chain Link Pricing in San Francisco

Four things move the number up or down, and none of them are the linear footage alone.

  • Coating spec. Standard galvanized is the baseline. Vinyl-coated chain link adds roughly $3 to $6 per foot but holds up far longer against salt air. Which spec you need depends on how close the property sits to the ocean or the bay.
  • Grade and racking. On steep lots, the fabric has to be racked (angled) rather than stepped, which takes longer, calls for longer terminal posts to maintain tension, and adds labor most flat-ground guides never price.
  • Footing conditions. Rocky or hard-pan soil on hillside lots often means augering or hammer-driving posts instead of a standard dig. That’s equipment and labor a suburban quote doesn’t carry.
  • Access and staging. Dense urban lots frequently mean material comes in through a side yard, a garage, or a neighbor’s property line. Tight access adds handling time.

Because of the fog belt and ocean salt, we spec stainless hardware and galvanized fittings even on short runs. Standard fasteners pit and seize within a fraction of their normal lifespan out here, and a rusted gate hinge on a rear lot becomes a security problem, not just a nuisance. When you’re ready to talk through your property, our Fence Installation team handles the whole scope from footing to gate swing.

Which Chain Link Coating Should You Choose in San Francisco?

Go vinyl-coated if the property is on the west side or within a few blocks of the bay, and standard galvanized is only reasonable for sheltered inland lots with good airflow. That’s the short answer. The longer answer is about how the fog behaves where you live.

On the west-side hills, marine fog sits on exposed metal for hours most mornings, and salt spray carries a mile or more inland on windy days. That combination eats standard galvanized chain link from the wire weave outward. Vinyl-bonded fabric costs more up front, but it separates the steel from the salt and buys you years before you’re replacing panels. Inland pockets like Noe Valley or the sunnier blocks of Bernal Heights see far less fog, so a well-galvanized run can make sense and saves money.

Here’s the honest tradeoff: vinyl coating adds $3 to $6 per foot over galvanized on the same layout. On a 100-foot rear-lot run, that’s a few hundred dollars more for a fence that could outlast a galvanized install by a decade. We’ll tell you which spec fits your block rather than defaulting to the cheapest option.

Why Most San Francisco Chain Link Goes in the Back

You’ll rarely see chain link at the front of a San Francisco house, and that’s by design. Planning Department rules limit street-facing fence height and often rule out chain link in residential front setbacks on aesthetic grounds. In practice, the vast majority of chain link here goes in rear yards, side lots, and on commercial or utility properties.

This matters for cost because rear-lot and side-lot installations tend to travel farther from the street, cross more grade changes, and land next to a neighbor’s structure. On a typical dense SF parcel, that means posts set close to a shared property line, careful surveying so you don’t build onto the neighbor’s side, and often a gate that has to open into a narrow passage. Each one is a small cost add that a straightforward front-yard fence wouldn’t trigger.

Chain Link Fence Cost by Line Item (San Francisco Market)

These ranges reflect real SF conditions – hillside grading, marine-grade spec, urban access. Your exact number depends on footage, grade, and coating. For comparison, our home page lists the full scope of services we run across the city.

Item Typical Cost Range
Chain link fence installation (full residential job) $4,130-$10,620
Per-foot equivalent (mixed grade, standard run) $35-$70 per linear foot
Vinyl-coated upgrade (adds to base) +$3-$6 per linear foot
Gates, hardware, and fittings (integrated into job) Included in range above

If you’re also weighing other yard upgrades or a driveway refresh, our Driveway & Paver Installation in San Francisco guide covers those ranges. Fencing pairs well with hardscape work because the equipment and access can be shared.

Who Should Be on the Property During an Urban Install?

On a dense SF lot, the crew usually reaches the work area through your interior, a garage, or a shared passage – which means you should know exactly who’s on the property. Every Groundwork technician is background-checked and arrives in uniform. That’s not a small detail on a street where a rear lot backs onto three neighbors and access runs through someone’s kitchen hallway.

We also keep calls answered by a live person 24/7, so if a scheduling question comes up the morning of your install, you’re not waiting until Monday. Our technicians have up to 12 years of experience, and every project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.

What does a chain link fence cost per foot in San Francisco?

Most San Francisco chain link installations land between $35 and $70 per linear foot, or $4,130 to $10,620 for a full residential job. Vinyl-coated fabric is at the higher end. Steep grades and rocky footing push the number up; a flat, sheltered inland lot keeps it low. Call (866) 320-2646 for an exact figure on your property – estimates are free.

Is vinyl-coated chain link worth it near the coast?

Yes, if you’re on the west side or close to the bay – vinyl coating is the difference between a fence that lasts and one that rusts within 3 to 4 years. The upgrade adds $3 to $6 per foot and pays for itself in avoided replacement. Inland lots with less fog can often justify standard galvanized. We’ll tell you which one fits your block.

Can you install chain link on a steep San Francisco hillside lot?

Yes. We rack the fabric so it follows the slope instead of stepping, and use longer terminal posts to keep tension across the grade. Rocky or hard-pan soil may call for augering or hammer-driven posts rather than hand digging. All of that adds labor, but it’s a normal part of hillside fencing here.

How much does chain link fence repair cost in San Francisco?

Small repairs like a sagging gate, a bent post, or a torn panel usually run a few hundred dollars and depend on access and hardware. Because salt air corrodes fasteners on the west side, replacing standard hardware with stainless and galvanized fittings is often part of the fix. Call (866) 320-2646 and we’ll give you a free quote.

Chain link in San Francisco is a specific job – hilly terrain, marine corrosion, tight urban access, and planning rules that push it to the rear. Groundwork Construction Co. of San Francisco builds chain link fences that survive the fog and get installed by background-checked crews under our 730-Day Done Right Promise. Call (866) 320-2646 for a free estimate and upfront pricing – the number you see is the number you pay.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.

What Our Customers Say

★★★★★ 5.0 from 5+ reviews

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

- Marco Castillo

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

- Angela Wong

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

- Robert Sullivan
Need Construction help in San Francisco? Licensed & insured · free written estimates
Call (866) 320-2646

Request a Free Estimate

Tell us what's going on in San Francisco. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch