A Groundwork company - serving San Francisco, CA
Groundwork Construction Co. of San Francisco construction team

Concrete Driveway Installation Cost in San Francisco - Free On-Site Measure, Price Per Square Foot

Free on-site measure and a written price per square foot before we book you in. Proper base preparation and sealed edges, because a cheap base is why driveways crack.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Concrete Driveway Installation Cost in San Francisco?

Concrete driveway installation in San Francisco typically runs $5,310 to $14,160, with most homeowners landing somewhere in the middle depending on square footage, slope, and how much demolition the job needs. A standard 20-by-20-foot driveway on a flat lot sits closer to the low end; a steep Sunset District slope with tight street access and a full tear-out of old asphalt pushes toward the top. Same-day and next-day estimates are available, and the number you see on our written quote is the number you pay.

That range reflects real bids on San Francisco streets, not a national average pulled from a home-improvement website. Fog, grade, and the city’s permit desk all shape the final figure here more than they do in most of California.

Key Takeaways

  • Typical San Francisco concrete driveway installation: $5,310 to $14,160.
  • Thickness, rebar, slope, and demolition are the four biggest cost drivers in this city.
  • Older neighborhoods with tight driveway access (parts of the Mission, Noe Valley, Bernal Heights) add labor and hauling cost.
  • Free estimates, upfront pricing, and 0% financing for 18 months are available on qualifying jobs.
  • All work is backed by the 730-Day Done Right Promise.

Concrete Driveway Installation Cost Breakdown (2026)

Here’s how the total shakes out by line item for the San Francisco market. Use this as a budgeting tool, then get a written quote measured to your actual driveway.

Line Item Typical Price Range
Concrete driveway installation (full job) $5,310 – $14,160
Paver driveway installation (alternative) $8,260 – $21,240
Asphalt driveway paving (alternative) $4,130 – $10,620
Driveway replacement (full tear-out and new pour) $5,900 – $16,520
Driveway sealing (protective top coat) $295 – $825

What pushes a job toward the high end of $5,310 to $14,160? Thicker slab for vehicle loads, rebar vs. wire mesh, a crowned or sloped pour for drainage, removal and hauling of old concrete, and the cost of street permits and traffic control. San Francisco adds a few of its own. A pour on a steep hill needs extra formwork and often a pump truck. A driveway that backs onto a busy street needs flaggers or a partial street closure. And a lot with only a narrow side-yard access gate means a crew can’t get a standard chute truck within reach, so material gets moved by wheelbarrow or a small pump.

The low end of that range covers a straightforward flat pour of moderate square footage, standard thickness, wire mesh, and a clean site. The high end covers a full replacement with demolition, thicker slab, rebar, complex formwork, and a sloped site. Most San Francisco projects land in the middle because most driveways here sit on a grade.

Estimate your square footage first

Concrete is priced by the square foot, and driveway width and length are what you should measure before any contractor visits. A single-car driveway is usually about 10 to 12 feet wide; a double-car is 18 to 20 feet. Multiply by length and you have your square footage. Bring that number to the estimate and you’ll immediately know whether a bid is in the right zone or wildly off. This single step filters out bad quotes faster than any review site.

What Affects Concrete Driveway Installation Pricing in San Francisco

San Francisco has cost factors that don’t show up in most parts of California. Here’s what matters most:

  • Slope and grade. Many San Francisco lots sit on hills that require extra formwork, a pump truck, and careful drainage planning. Steep driveways in Bernal Heights or Diamond Heights run higher than flat driveways in the southern part of the city because the pour needs more setup and a controlled mix.
  • Demolition and hauling. Old concrete or asphalt has to be broken out and trucked away. In dense blocks, that means short work windows, disposal fees, and parking coordination. A tear-out and replacement job runs toward the higher end of the $5,900 to $16,520 replacement range for this reason.
  • Thickness and reinforcement. Standard residential slabs are around 4 to 5 inches thick, with rebar or wire mesh. A driveway that sees heavy vehicles may need 5 to 6 inches. Thicker concrete, more rebar, and higher-strength mix push the price up, but they also prevent cracking down the road.
  • City permits and street access. San Francisco requires permits for driveways that touch the sidewalk or curb, and street-use coordination for any job that blocks traffic. That paperwork and scheduling adds cost, but skipping it leads to fines and rework, so it’s not optional.
  • Fog and moisture. The city’s marine layer means concrete cures differently than in dry climates. Pour scheduling, cure times, and surface finish need to account for cooler, damper air. This isn’t a cost line you see on a bid, but it’s why local crews that know the climate give more reliable timelines and fewer winter surprises.
  • Finish and drainage. A basic broom finish is the most economical. Decorative finishes, stamped patterns, and scored joints cost more. Proper grading and drainage is a small line item that prevents standing water and cracks later, and any experienced crew will insist on it.

The local climate matters more than most homeowners realize. In San Francisco, we regularly see early surface wear on driveways poured without proper curing and drainage planning, because the marine air and fog keep the slab damp. A driveway that drains well and is poured with the fog in mind will outlast one that was poured on a dry, hot schedule. If you want to see what a well-finished exterior surface looks like, our San Francisco service area page walks through recent projects around the city, and the home page lays out the full range of exterior work we handle.

How to Save on Concrete Driveway Installation

You don’t have to cut corners to keep the price down. A few practical moves make a real difference:

  • Get the square footage nailed down first. Bring measured dimensions to your estimate and skip the vague “well, it depends” phase. A contractor can then price accurately and quickly.
  • Combine the pour with a related exterior project. If you’re also planning a patio or pavers, doing the work in one mobilization saves on crew and setup costs. Browse our paver patio installation service to see how a combined job is priced.
  • Choose a simple finish. A broom finish with clean scored joints is durable and the most economical option. Decorative and stamped finishes cost more, and you can always upgrade later.
  • Ask about the driveway sealing schedule. A seal coat every couple of years keeps the concrete from absorbing water and extends the time before replacement. Our driveway sealing service runs $295 to $825, which is far less than a new pour.
  • Compare against alternatives. If the budget is tight, asphalt at $4,130 to $10,620 is an option, and pavers at $8,260 to $21,240 offer a different look and often better drainage on slopes. See how paver driveway installation and asphalt driveway paving compare before you commit.
  • Time the job around the fog. Ask your contractor about scheduling the pour when the marine layer is thickest and cure times are predictable, so the job isn’t rushed.

If you’re planning to replace an old or failing driveway, our driveway replacement service covers full tear-out and new pour, and it’s often the better move than patching a crumbling slab. Call (866) 320-2646 for a free estimate.

FAQs – Concrete Driveway Installation Cost

How much does a concrete driveway cost in San Francisco?

Concrete driveway installation in San Francisco typically costs $5,310 to $14,160. The final price depends on square footage, slope, demolition, and whether the job includes a full tear-out. For an exact number, call (866) 320-2646; estimates are free.

Is concrete cheaper than pavers for a driveway in San Francisco?

Usually, yes. Concrete driveway installation runs $5,310 to $14,160 while paver driveway installation runs $8,260 to $21,240 in the San Francisco market. Concrete is the more economical choice up front; pavers cost more but can offer better drainage on a slope. Call (866) 320-2646 to compare both for your lot.

How much does it cost to replace an old concrete driveway in San Francisco?

Driveway replacement, including tear-out and a new pour, runs $5,900 to $16,520 in San Francisco. The old surface has to be broken out and hauled away, which adds labor and disposal cost. For a straight comparison against repairing what you have, call (866) 320-2646.

Do I need a permit for a concrete driveway in San Francisco?

Yes, any driveway that meets or crosses a public sidewalk or curb needs a permit in San Francisco, and street-use coordination is often required. That paperwork adds cost but skipping it leads to fines and rework. Call (866) 320-2646 for a free estimate that includes the permitting picture for your block.

How much does it cost to seal a concrete driveway in San Francisco?

Driveway sealing in San Francisco costs $295 to $825, depending on the size and condition of the surface. Sealing every couple of years protects the slab from the city’s damp air and extends its life. A fresh seal costs far less than a new pour; call (866) 320-2646 to schedule it.

How long does a concrete driveway last in San Francisco’s climate?

A well-poured, well-drained concrete driveway lasts decades, but the marine fog and damp air mean curing and drainage have to be handled correctly from day one. In San Francisco, driveways poured with proper grading and cure timing hold up far longer than rushed jobs. Our technicians have up to 12 years of experience with local conditions, and all work is backed by the 730-Day Done Right Promise.

Can you come give an estimate this week?

Yes. Calls are answered by a live person 24/7, so you can reach us any time and schedule a free project estimate and design consult. Call (866) 320-2646 and we’ll find a time that works.

If you want the straight answer on what your driveway will cost, get a free written estimate. Our technicians are background-checked and arrive in uniform, and we back every project with the 730-Day Done Right Promise. There’s no-hassle upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (866) 320-2646 for a free estimate and design consult.

Pricing reflects the San Francisco market as of 2026. Groundwork Construction Co. of San Francisco offers free estimates – call (866) 320-2646.

What Our Customers Say

★★★★★ 5.0 from 5+ reviews

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

- Marco Castillo

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

- Angela Wong

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

- Robert Sullivan
Need Construction help in San Francisco? Licensed & insured · free written estimates
Call (866) 320-2646

Request a Free Estimate

Tell us what's going on in San Francisco. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch