Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Tamalpais-Homestead Valley, CA
Concrete driveways and concrete work in Tamalpais-Homestead Valley usually means one of two projects: a new pour replacing a cracked or rutted drive, or flatwork tied to a slope, retaining wall, or drainage correction. A typical driveway pour runs $4,500 – $12,000, and most jobs take three to five working days from demo to the day you can park on it. Call (866) 320-2646 for a free on-site estimate.
What makes Tamalpais-Homestead Valley different from a flat-lot subdivision is that almost no driveway here is flat. The community sits in steep, wooded hillside terrain, and a driveway is often the steepest, most load-bearing surface on the property. That changes the engineering, the drainage, and the price.
Key takeaways
- Most concrete driveway jobs land between $4,500 and $12,000, with slope, drainage, and access pushing the number up.
- Plan on three to five working days of active work, plus a cure window before you drive on it.
- County of Marin permitting applies here, not a city building department, and hillside grading often triggers additional review.
- Drainage is the failure point on these hillside lots. We design it in from day one.
How we sequence a concrete job in Tamalpais-Homestead Valley
Stage 1: Site walk and measurements. We start by walking the grade with a level and mapping where water actually goes during a storm. On these hillside lots, that’s the single most important hour of the project. You’ll decide the driveway width, the finish, and whether we’re tying into an existing apron. Expect this visit to take about 90 minutes.
Stage 2: Permits and engineering. For a straight replacement, County of Marin review is usually straightforward. If we’re changing the grade, adding a retaining structure, or cutting into a slope, you may need a soils or drainage plan. That review can take a few weeks, and we tell you up front which path your project falls on so there’s no surprise mid-job.
Stage 3: Demolition and haul-off. Day one on most jobs is breaking out the old concrete and hauling it away. On the narrow private lanes off the valley floor, staging is the real constraint. We confirm truck access and dumpster placement before demo day, because a lane that fits a pickup doesn’t fit a loaded tri-axle. You’ll want to move cars off the drive the night before.
Stage 4: Base prep and drainage. This is where the job is won or lost. We excavate to depth, compact the subgrade, and set a properly graded base with a slope away from the structure. On shaded north-facing lots under the redwoods, the ground stays damp, so we build in drainage rather than assuming sun will dry it. This stage typically takes one to two days.
Stage 5: Pour, finish, and cure. We place the concrete, finish it to your chosen texture, cut control joints, and set the cure plan. You’ll get a clear date for when it’s safe to walk and when it’s safe to park, because those are different days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Concrete isn’t one product. Here’s what actually changes the look, the durability, and the price on a Tamalpais-Homestead Valley driveway.
- Standard broom finish: The most common and the best value. Good traction on a slope, easy to maintain, and it holds up to our wet winters. This is the baseline most homeowners choose.
- Exposed aggregate: A textured finish with visible stone. Better grip on steep grades and less prone to showing tire marks, but it costs more and is harder to patch cleanly if it ever cracks.
- Reinforcement: Rebar or mesh matters more here than on flat lots, because a steep drive takes more load and shifts more with the ground. We spec reinforcement as standard on grade work.
- Thickness and mix design: A heavier pour handles vehicle load and freeze-thaw cycles better. On a hillside drive, going a bit thicker is cheap insurance.
- Drainage and retaining details: Channel drains, swales, and retaining walls are where hillside budgets grow. These aren’t optional add-ons here; they’re what keeps the concrete from heaving and cracking.
If the wider project includes patios or walkways around the pour, we handle that under our Driveway & Pavers service. Finish choices like these are also where a strong material partnership pays off, and we spec through Belgard where pavers come into the mix.
What Concrete Driveways & Concrete Work costs in Tamalpais-Homestead Valley, CA
Concrete driveway installation in Tamalpais-Homestead Valley runs $4,500 – $12,000 for a typical residential driveway. A full driveway replacement lands at $5,000 – $14,000 once demo and haul-off are included. If the job is a larger flatwork project with retaining or drainage work, the number climbs from there.
What pushes a job to the low vs. the high end:
- Size and slope: A short, gently sloped drive sits at the low end. A long, steep drive needs more concrete, more reinforcement, and more careful grading.
- Existing condition: Cracked, heaved, or poorly drained base means more demo and more base repair before we pour.
- Access and staging: On the narrow private lanes here, getting equipment and material in can mean more labor and smaller loads.
- Drainage and retaining work: Adding channel drains or a retaining wall is real scope and moves the price.
- Permit scope: Grade changes and structural work can add review and design cost.
Your written estimate is line-item: demo, haul-off, base prep, reinforcement, concrete, finish, drainage, and permit cost all spelled out. Upfront pricing, no surprises, so the number you see is the number you pay. If you’re folding the driveway into a larger project, our Driveway & Pavers in Tamalpais-Homestead Valley page covers the full scope.
See the difference
Before
After
Before
After
Before
AfterWhat Tamalpais-Homestead Valley homes specifically do to this job
Permitting here runs through the County of Marin, not a city building department, and that shapes the timeline. Hillside grading, drainage changes, and anything touching slope stability get a closer look, so we plan the permit path before demo day rather than discovering it after.
The housing stock is a dense mix of mid-century redwood-and-glass hillside homes and 1950s – 70s post-and-beam houses tucked into the trees, many with additions and retaining walls layered on over the years. That means we’re often working around existing structures, mats of redwood roots, and drainage that was never solved correctly the first time. On the north-facing slopes, homes stay damp and shaded, so moss, rot, and poor drainage show up on flatwork that the sunny side of the valley never deals with. When we pour concrete in Tamalpais-Homestead Valley, we design for water leaving the site, not pooling against the house.
Serving Tamalpais-Homestead Valley, CA – Our Local Coverage Area
We serve Tamalpais-Homestead Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Tamalpais-Homestead Valley
Most jobs take three to five working days of active work, plus a cure window before you can park on it. Steep sites and drainage work add time. Call (866) 320-2646 for a timeline on your specific drive.
Straight replacements often need a county permit, and any grade change or retaining work definitely will. We handle the County of Marin permitting and inspections for you, so you’re not the one chasing paperwork. Call (866) 320-2646 and we’ll tell you what your project needs.
Concrete driveway installation runs $4,500 – $12,000, and a full replacement runs $5,000 – $14,000. Slope, access, and drainage are the biggest swings. Call (866) 320-2646 for an exact quote; estimates are free.
Yes. Steep grade is the norm here, and we build in the reinforcement, base prep, and drainage that keep a hillside pour stable. The key is solving water and slope before the pour, not after. Call (866) 320-2646 to schedule a site walk.
Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (866) 320-2646 to talk through the details.
Get a free estimate for concrete work in Tamalpais-Homestead Valley
We’ll walk your grade, flag the drainage and access issues before they become change orders, and hand you a line-item estimate you can compare. Calls are answered by a live person, 24/7. Our technicians bring up to 12 years of experience to every pour, and our Tamalpais-Homestead Valley coverage means we know these hillside lanes. Homeowners often pair a new drive with a Garage Conversion ADU in Tamalpais-Homestead Valley or a New Detached ADU in Tamalpais-Homestead Valley, since both need a solid, code-ready surface. Call (866) 320-2646 to schedule your free estimate.
Written by the team at Groundwork Construction Co.