Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Corte Madera, CA: What the Job Actually Involves
Custom & geometric windows in Corte Madera run $8,000 to $25,000 for most whole-house projects, and a single signature unit (a trapezoid gable window, a curved arch, a radius-top picture window) typically lands between $1,800 and $6,500 installed. Plan on 6 to 10 weeks from template to final trim, because every geometric unit is built to order. Call (866) 320-2646 for a free on-site measure and a written, line-item estimate.
How a Custom & Geometric Window Project Moves, Stage by Stage
Angled and arched units aren’t stock items. Someone has to measure the actual opening, not a nominal size, and that measurement becomes the factory template. Here’s the real sequence we run.
Stage 1: Field measure and template (week 1)
We measure every opening to the sixteenth of an inch, photograph the rough framing, and check whether the existing wall is plumb and square. On a 1960s Corte Madera split-level, it usually isn’t. The homeowner decides here whether we’re matching existing trim profiles or starting fresh, and whether the new unit sits in the same plane as the old one or steps out for a deeper sill.
Stage 2: Order and shop drawings (weeks 2 – 3)
Geometric units go to the manufacturer with a drawing you approve before anything is cut. This is where you lock the material, the glass package and the finish. Any change after this point means a re-order, so we walk the drawing with you line by line. Lead time on a radius or trapezoid unit runs 4 to 6 weeks; standard rectangles are faster.
Stage 3: Prep and demo (days 1 – 2 on site)
We protect floors, pull the interior trim, cut back siding or stucco to the rough opening, and inspect the framing behind it. On older Corte Madera homes this is where we find dry rot, a header that’s undersized, or framing that’s been notched for old wiring. We photograph whatever we find before we touch it, so there are no surprise line items later.
Stage 4: Setting, flashing and sealing (days 2 – 4)
The unit gets set, shimmed and checked for square, then flashed at the head and sill and sealed in the correct sequence. Flashing order matters more than the caulk on a hillside lot where wind-driven rain hits the west elevation. Insulation goes back in, and the interior gets trimmed out.
Stage 5: Trim, finish and final walkthrough (days 4 – 5)
Interior casing, stool and apron, exterior trim, paint touch-up, and a function check on every operable sash. We hand you the warranty paperwork and the as-built measurements at the walkthrough. Most single-room geometric projects finish in under a week on site once the units land.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Geometric Window Order
Every one of these decisions changes both the price and how the window feels in the room. Here’s the honest trade-off on each.
- Frame material: wood vs. clad wood vs. fiberglass. Wood gives you the cleanest profiles for curved and angled shapes and paints to match historic trim, but it needs repainting every 5 to 8 years in Marin’s wet winters. Aluminum-clad wood (Andersen and Marvin both build geometric units in clad) costs 15 to 25% more up front and eliminates exterior maintenance. Fiberglass handles the marine humidity well and holds a finish, but fewer manufacturers offer true radius shapes in it.
- Glass package. Double-pane low-E is the baseline for a Corte Madera home. Tempered glass is required on any unit where the sill sits low or the glass runs close to a door, and that adds roughly $150 to $400 per unit. Laminated glass buys you sound control on the creek side of town, where traffic and water noise carry.
- Shape complexity. A rectangle costs the least. A trapezoid or a true radius arch carries a custom-shape premium, often 30 to 60% over the same square footage in a rectangle, because the frame is bent or CNC-cut and the glass is cut to a template. A half-round over a rectangle (a “circlehead”) is the most common geometric order we build.
- Operation. Fixed units are the cheapest and the tightest. Operable awning and casement units inside a geometric assembly add hardware cost and a little more maintenance, but they’re what make a two-story custom home livable in July.
- Finish and trim. Interior casing in a stain-grade wood, matched to the door and window trim throughout the house, is what separates a custom job from a replacement job. Factory finish costs more than field paint but holds up better on a curved profile.
What Custom & Geometric Windows Cost in Corte Madera, CA
Here’s the range we quote most often, and what pushes a project to one end or the other. These are estimates for the window scope alone, not a whole-house remodel.
| Scope | Typical Range |
|---|---|
| Single geometric unit (arch, trapezoid, circlehead), installed | $1,800 – $6,500 |
| Geometric window package, whole house | $8,000 – $25,000 |
| Standard window replacement (for comparison) | $4,500 – $15,000 |
| Structural reframing for a new opening | quoted per opening after framing inspection |
Five things move that number. Size and shape – a 6-foot radius arch costs far more than a 3-foot one, and every non-rectangular shape carries a custom template charge. Existing condition – dry rot, undersized headers, or a wall that’s out of plumb all add framing labor. Material grade – clad wood over primed wood is a real jump. Glass – tempered, laminated or sound-control packages add per unit. Permit scope – a like-for-like swap is a simpler permit than cutting a new opening and reframing a wall. Your written estimate itemizes the units, the glass, the trim, the labor and the permit, and the number you see is the number you pay. What it doesn’t include unless we list it: structural engineering, stucco or siding repair beyond the immediate opening, and interior painting.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Specifically Do to This Job
Corte Madera is a flood-plain-and-hillside town, and that split shows up in window work. The low-lying flats near Corte Madera Creek and around the Town Center sit in a designated FEMA flood zone, which means an elevation certificate, flood-elevation permitting and drainage considerations on any project that touches the envelope. We’ve seen sill heights pushed up on creekside homes because the finished floor had to clear the base flood elevation. Blocks away, on the hillside lots above town, the concerns flip entirely: wind-driven rain on the west elevation, slope drainage, and the retaining and deck work that so often goes with it. The housing stock is mostly 1950s-to-1970s ranchers and split-levels, many now being gutted or replaced with larger two-story customs. That means we open a wall and find original framing, old aluminum windows set with minimal flashing, and single-pane glass that’s been fogging for a decade. We see these failures most on the older flats near the marsh and along the streets just off the Town Center, where the marine air and winter rain do the most damage. Homes in the 94925 ZIP see it year after year.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Corte Madera
Most projects run 6 to 10 weeks total, with 4 to 6 weeks of that being the factory lead time on the shaped units and 3 to 5 days on site for installation. A single arch or circlehead in an existing opening is faster; a whole-house geometric package with new openings and reframing takes longer. Call (866) 320-2646 to get a schedule for your specific openings.
Yes, in nearly every case. Like-for-like replacement still needs a permit, and a new or enlarged opening needs one plus an inspection of the framing and flashing before the wall is closed. On a creekside property in the flood zone, the permit review can also pull in elevation and drainage documentation. We pull the permits and manage the inspections.
Often yes, if the new unit fits inside the existing rough opening and the wall isn’t load-bearing beyond what’s already there. A new opening in a bearing wall means a header and possibly engineering, which we’ll flag before the order is placed. We tell you which openings are simple swaps and which need structural work during the field measure.
A whole-house geometric package typically runs $8,000 to $25,000, and a single signature unit installed runs about $1,800 to $6,500. Shape complexity, frame material and glass package are the biggest variables. Call (866) 320-2646 for an exact, written line-item quote, free of charge.
Our installation is covered by the 730-Day Done Right Promise, and the window units carry their own manufacturer warranty on the frame and glass seal. If something isn’t right, we make it right. We hand you both sets of paperwork at the final walkthrough, so there’s no fine print to chase later.
Get a Free Estimate on Custom & Geometric Windows in Corte Madera
If you’re planning shaped, arched or angled windows for a Corte Madera home, start with a free on-site measure. We’ll bring a laser, check the framing at each opening, and hand you a written line-item estimate with the units, glass, trim and permit spelled out. Calls are answered by a live person around the clock. Reach us at (866) 320-2646.
Written by the team at Groundwork Construction Co.