Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in San Francisco, CA
Custom and geometric windows in San Francisco are made-to-order units built to a specific opening, angle, or shape rather than pulled from a standard size chart. They’re the arched transom over a Noe Valley entry, the angled trapezoids that follow a steep roofline in Twin Peaks, the round porthole in a Marina loft, or the triangular clerestory that pulls light into a narrow Bernal Heights stairwell. You come to us when an off-the-shelf window won’t fit, when the architecture calls for a shape a factory catalog doesn’t stock, or when you’re restoring a Victorian and the trim profile needs to match the original.
This work sits inside our broader Windows & Doors service, but it runs differently. Custom units mean longer lead times, millwork-grade measurements, and a fabricator who’ll build exactly what the drawing shows. We work with Andersen and Marvin for the factory-custom and specialty shapes, and with local millwork shops for true one-off builds. Our technicians have up to 12 years of experience, and every project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Call (866) 320-2646 to start a free estimate and design consult.
Key Takeaways
- Custom and geometric windows are built to the opening, not chosen from a catalog – arches, trapezoids, rounds, triangles, and angled units.
- San Francisco’s Victorian and Edwardian housing stock makes matching original shapes and trim profiles a common need in Noe Valley, the Mission, and Pacific Heights.
- Expect 8-16 weeks from order to install for factory-custom units; true architectural millwork can run longer.
- Pricing depends on shape, glass, and finish – ranges below give real numbers, and our quote is upfront so the number you see is the number you pay.
- Every install is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space.
When You Need Custom & Geometric Windows
San Francisco’s housing stock is unlike most cities. A huge share of homes are 1890s-1920s Victorians and Edwardians, plus post-war stucco boxes and modern infill. That mix produces very specific reasons homeowners call us for custom glass. Here’s where a made-to-order window is the right answer instead of a stock replacement.
- An arched or angled opening in a period home. If your building has a half-round or segmental arch over a bay or a door, a rectangular stock window won’t fill it without an ugly infill panel. A custom arch that follows the original radius looks correct from the street and holds the historic character that adds real value in Noe Valley and Pacific Heights.
- A roofline or stairwell that isn’t square. Steeply pitched roofs in Twin Peaks and the hills near Cole Valley often leave trapezoidal or triangular gaps under the eaves. Custom geometric units turn those dead spaces into light without a boxy fill.
- Rounded or clerestory features in a modern remodel. In a Marina loft conversion or a Bernal Heights addition, a round porthole, a half-moon transom, or a run of triangular clerestory windows over a narrow stairwell is often the design intent. Those shapes are made to order.
- You’re in a designated historic or conservation area. Some neighborhoods and building types require window replacements that match the original profile and muntin pattern. A custom unit lets you meet that standard instead of settling for a generic vinyl frame.
- A reclaimed or odd-sized opening. Older homes settled and shifted. If your opening is out of square or an unusual size after a remodel, a custom build gets a clean fit rather than a stock window plus trim hiding the gap.
- You want a specific look that stock can’t deliver. Radius-top French doors converted to windows, a curved bay wrap, or a stacked geometric feature wall – these are custom by definition.
If your situation is a fairly standard replacement – same size, same shape, just newer glass – the custom route is overkill and more expensive. Our Windows & Doors team can sort out whether you actually need a custom build or whether a stock Andersen or Marvin unit in a standard size will do the job. That honesty saves money, and it’s the reason homeowners call us back.
Our Custom & Geometric Windows Process
Custom windows go wrong when measurements or drawings get rushed. We treat the design and documentation phase as seriously as the install, because that’s where the schedule lives or dies. Here’s how a custom and geometric window project runs with us in San Francisco.
- Free estimate and design consult. We walk the opening with you, take a look at the adjacent framing and siding, and talk through what shape and glazing make sense. You get a clear scope and an upfront price – no-hassle upfront pricing so the number you see is the number you pay. If you’re planning a larger remodel, ask about our $1,000 off projects over $10,000 and 0% financing for 18 months.
- Precise field measurement and templating. For arches, trapezoids, rounds, and other non-rectangular openings, tape measure isn’t enough. We build a template or take a precise profile of the opening so the fabricator has exact radius, angle, and rise dimensions. This step prevents the “it’s close but won’t seat” problem that plagues poorly documented custom orders.
- Choosing materials and glass. We’ll walk you through frame material for your shape – wood and wood-clad units like Andersen and Marvin specialty lines handle radius and angle builds well, and for exterior trim we often finish with James Hardie for long-term durability. Glass gets matched to your climate needs: San Francisco’s coastal fog and west-facing sun make low-E performance worth discussing.
- Fabrication and shop drawings. You approve shop drawings before anything is built. This is the moment to catch a radius that’s off or a muntin pattern that doesn’t match the street, not after the unit ships.
- Install and sealing. Custom units are heavy and often awkwardly shaped, so this is careful work. We set the frame square and plumb, flash and seal against San Francisco’s wind-driven rain, and match exterior trim to the building. When the shape makes the detail tricky – a curved bay wrap or an angled transom – the sealing detail is where we spend the extra time.
- Final walkthrough and warranty. We operate the window, check the seal and finish, and hand off with the 730-Day Done Right Promise in writing. If a seal, a frame, or a finish fails within that window, we come back and make it right.
Across all seven of our service lines, the same standard holds – from foundation to finish line, one contractor for the whole scope. That matters more with custom work, where coordination between the window supplier, the framer, and the trim carpenter can otherwise turn into finger-pointing.
Custom & Geometric Windows Pricing in San Francisco
Custom and geometric windows cost more than stock units because they’re built to your opening and often require templating and shop drawings. In San Francisco, plan on roughly $1,200 to $4,500 per custom unit, with specialty shapes and period-accurate millwork climbing higher. Here are honest ranges for what drives the number.
| Scope | Typical range (San Francisco) |
|---|---|
| Single custom rectangular unit (non-standard size) | $1,200 – $2,800 |
| Arched or radius-top custom window | $1,800 – $3,800 |
| Trapezoid, triangle, or angled geometric unit | $2,000 – $4,200 |
| Round or half-round (porthole, transom) | $1,600 – $3,500 |
| Custom bay or curved wrap (multi-unit) | $4,000 – $12,000+ |
| Templating and shop-drawing design fee | $150 – $600 |
What affects the price
Five things move a custom window quote the most:
- Shape complexity. A rectangle at a non-standard size is the cheapest custom build. Radius, angled, and round units add fabrication labor. A curved or fully custom architectural piece adds the most.
- Frame material. Wood and wood-clad units (our Andersen and Marvin lines) cost more than vinyl but hold up better and suit period homes. Clad exteriors need less painting over time.
- Glass and glazing. Low-E, tempered, laminated, and insulated glass all add cost. San Francisco’s fog and west sun make performance glazing worth the money on the right face of the building.
- Trim and millwork matching. Restoring an original Victorian trim profile means custom milling, which runs higher than standard casing. For the exterior, we often use James Hardie for durability and a clean finish that frames the custom unit well.
- Access and staging. Hillside homes, tight alleys, and stair-only access in parts of Pacific Heights and Twin Peaks make large or awkward units harder to get in. That labor has a cost, and we price it honestly up front rather than springing it on you later.
We give you one clear price with no surprises – the number you see is the number you pay – backed by the free estimate and design consult. If your project runs past $10,000, you also get $1,000 off, and 0% financing for 18 months helps spread the cost of a larger window or door package across a remodel. For a real number on your opening, call (866) 320-2646.
FAQs – Custom & Geometric Windows
How long does it take to get custom and geometric windows in San Francisco?
Most factory-custom units take 8 to 16 weeks from order to install, and true architectural millwork can run 16 to 24 weeks. Lead time depends on the shape, the fabricator, and the season – a specialty arch or angled build goes through shop drawings and fabrication before it ships, so it’s naturally slower than a stock replacement. We give you a realistic schedule up front and keep you updated. Call (866) 320-2646 to talk through timing for your project.
Can you match the original shape and trim on a San Francisco Victorian?
Yes, matching original shapes and trim on a Victorian or Edwardian is one of the most common reasons homeowners call us for custom glass. We template the opening, match the radius and muntin pattern, and mill or source trim that follows the original profile so the new window reads correctly from the street. Historic and conservation-area requirements vary by building, so we confirm what your property calls for before ordering. Start with a free estimate – call (866) 320-2646.
Is it cheaper to repair a damaged custom window or replace it?
Repair is usually cheaper when the frame is sound and only the glass, seal, or hardware failed – a glass swap or a hinge replacement often costs a fraction of a new unit. Replacement makes more sense when the frame is rotted, the opening has shifted out of square, or the shape can no longer be matched. We’ll tell you honestly which is the better spend. Call (866) 320-2646 and we’ll assess it on site, free.
Do you offer financing for custom window projects?
Yes, 0% financing for 18 months is available on custom and geometric window projects. Larger ornate builds and multi-unit packages often cross $10,000, which also qualifies for our $1,000 off projects over $10,000 offer. That’s on top of the free estimate and design consult, and everything is backed by the 730-Day Done Right Promise. Call (866) 320-2646 to get your quote and see how the numbers work.
Why Homeowners Call Groundwork Construction Co. of San Francisco
Custom work rewards a contractor who shows up on time, measures carefully, and honors the warranty in writing. We answer the phone with a live person, 24/7 – no voicemail black holes, no waiting until Monday. Our technicians are background-checked and arrive in uniform. And when you add a custom window package to a broader project – say, a kitchen or bath remodel finished with KraftMaid, Wellborn, or Cambria surfaces – we coordinate it all under one roof, from foundation to finish line, so you’re not chasing three different trades.
Looking for a reliable partner across the whole home? Our San Francisco service area page covers how we work across the city’s neighborhoods. Whether it’s an arched transom in Pacific Heights, an angled clerestory in Twin Peaks, a porthole in the Marina, or a historic match in Noe Valley, the standard is the same: built to last, backed in writing.
Ready to fix that awkward opening or restore the shape your building was meant to have? Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate and design consult. A live person answers, day or night, and we’ll give you an upfront price with no surprises.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.