A Groundwork company - serving San Francisco, CA
Custom & Geometric Windows in Half Moon Bay, CA | Groundwork Construction Co. of San Francisco

Custom & Geometric Windows in Half Moon Bay - Free In-Home Measure, Written Price

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Custom & Geometric Windows in Half Moon Bay: What They Cost and How Long They Take

Custom & geometric windows in Half Moon Bay typically run $6,500 to $22,000 for a whole-house package of shaped or oversized units, and most single feature windows – a half-round over an entry, an angled corner unit, a trapezoid following a roofline – land between $1,800 and $5,500 installed. Lead time on true custom units runs 8 to 14 weeks from template to install, and the install itself is usually two to four days. Call (866) 320-2646 and we’ll put real numbers on your specific openings.

Call (866) 320-2646

How we take a geometric window from template to trim

Shaped and oversized windows don’t fail because of the glass. They fail because somebody measured a rectangle and forced it into an arched opening. The sequence below is how we keep that from happening, and where you have a decision to make at each stage.

Day 1 – template and site check. We don’t measure; we template. Every arched, angled, or radius opening gets a physical template taken from the rough opening itself, and we confirm the wall framing is square and sound before anything gets ordered. On older coastal homes around Ocean Colony, this is also where we find rot or prior patching that has to be corrected first. Your decision here: finalize the shape, the glazing package, and whether we’re holding the existing opening or re-framing it.

Week 1 to 2 – order and permit. Custom units go into production after the template is signed off. If the work triggers a permit – and re-framing an opening or changing one to a different size usually does – we file it here so the review clock runs while the windows are being built. Your decision: finish and paint color inside and out, and whether you want any tempered or laminated glazing in the package.

Weeks of production – prep and staging. Eight to fourteen weeks, and there’s nothing to rush. We stage materials, confirm the flashing detail we’ll use at the exterior, and set the install window so it doesn’t sit in the middle of a rain stretch.

Install days 1 to 3 – demo, set, flash. Old unit comes out, rough opening gets squared and repaired, new unit sets, and every exterior transition gets flashed and sealed before anything gets trimmed. On the coast this step matters more than any other, and we don’t compress it. Your decision: none, unless a surprise shows up in the framing, which we photograph and price before going further.

Days 3 to 4 – trim, glass, and walkthrough. Interior and exterior trim go on, the unit gets checked for operation and seal, and we walk every window with you before we call it done. Chipped or cracked units get replaced, not caulked around.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The options you’ll actually be choosing between

Shaped windows narrow your choices fast, and the honest trade-offs matter more than the showroom.

  • Wood with a clad exterior. The warm, paintable interior most Half Moon Bay homes want, with a factory-finished exterior that survives the fog. It’s the priciest option and the one that fits older coastal architecture best. Andersen and Marvin both make custom-shape units in this format.
  • Vinyl. Lower cost, low maintenance, and no repainting. The catch: fewer shapes available, and deep radius or trapezoid units get limited by what the extruder can bend. Good fit for a simple arch, a poor fit for a complex one.
  • Fiberglass. Holds up to damp and salt better than wood, holds shape well, and costs between vinyl and clad wood. Finishes are more matte, so it suits a clean modern look more than an ornate one.
  • Glazing. Standard dual-pane is the baseline. Add laminated glass on the windward side and you cut both noise and UV, and you get a stronger unit against debris. Low-E helps here too – the coastal fog softens the solar gain so you’re choosing it for condensation and UV control, not cooling load.
  • Finish. Factory finish beats site paint for durability on the exterior. If you want a specific color, get it from the factory even if it adds three weeks.
  • Hardware and frames. Specifying corrosion-rated hinges and fasteners is a small line item and a big deal on a marine-exposed home.

What Custom & Geometric Windows cost in Half Moon Bay, CA

Plan $1,800 to $5,500 per shaped feature window, and $6,500 to $22,000 for a house-wide package of custom or oversized units. The per-window range is the one you’ll care about, because most projects start with one or two.

What pushes a project to the low end: a single half-round or arched transom in an existing opening, vinyl or fiberglass, standard glazing, and no framing changes. What pushes it to the high end: multiple units, re-framing to change a size, clad wood, laminated glass, and complex shapes with a long production tail.

The four variables that move the number most:

  • The shape itself. A half-round is common and affordable. An eyebrow or an arched pair with a mullion is more complex and priced accordingly.
  • The opening condition. Square, dry framing is cheap. Rotted sills, out-of-plumb walls, and old flashing detail cost real money to fix correctly.
  • Framing changes. Keeping the opening size holds cost flat. Cutting a new opening or enlarging one adds framing, header work, and often structural review.
  • Permit and inspection scope. A like-for-like swap can clear as a simple permit. New openings, structural work, or anything inside a coastal review zone runs longer and carries more cost.

Every written estimate we hand you lists each unit, glazing, finish, labor, permit, and disposal as a line item, and the number you see is the number you pay – no change orders creeping in mid-job. What’s typically not in a first number: hidden rot repair and any interior repaint beyond the trim.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Half Moon Bay homes specifically do to this job

Half Moon Bay sits in the coastal fog belt, and that changes what happens behind the glass. Salt-laden marine air, persistent damp, and the Coastal Commission and coastal zoning overlay shape nearly every construction decision here, and window work is no exception – a modest project near the coastline can carry extra review that you won’t see two towns inland. Corrosion-resistant hardware, continuous flashings, and a proper moisture barrier aren’t upsells on this coast. They’re the difference between a window that lasts and a call-back in two years.

The housing stock is a mix of older coastal single-family homes, 1960s and 70s ranch and tract houses in neighborhoods like Ocean Colony and Alsace Lorraine, and newer custom builds. Many of those homes carry wood siding and wood-framed balconies that have been breathing salt air for decades, so we plan for rot repair on a fair share of geometric-window jobs and price it honestly when it shows up. Custom-shaped windows fit that older architecture well, and they’re often the neighbor to a deck or siding project – homeowners frequently pair this with Asphalt Driveways & Resurfacing in Half Moon Bay when a job stretches across the exterior.

If your window project is part of a full Windows & Doors in Half Moon Bay scope, we’ll sequence the shaped units against the rest of the openings so the job runs in one push instead of three. And when you’re comparing the wider range of what we install, our Windows & Doors service covers the standard and impact options alongside the custom work. We cover Half Moon Bay and the surrounding coastline, and we’ve seen plenty of projects where the exterior call also brings up the Concrete Driveways & Concrete Work in Half Moon Bay conversation.

Some spec notes worth keeping in mind: GAF and CertainTeed both matter on the roof flashing above a shaped window, and Sterling and Grohe show up in the bathroom and kitchen remodels that often ride along with a whole-exterior upgrade.

Serving Half Moon Bay, CA – Our Local Coverage Area

We serve Half Moon Bay and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently asked – Custom & Geometric Windows in Half Moon Bay

Get a free estimate on your custom & geometric windows in Half Moon Bay

Call (866) 320-2646 for a free on-site estimate. A live person answers, day or night – no voicemail, no waiting until Monday. We’ll template the openings, talk through shapes, glazing, and finish, and hand you a written line-item quote with permit and disposal spelled out, backed in writing by the 730-Day Done Right Promise. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available.

Written by the team at Groundwork Construction Co.

Why Half Moon Bay Chooses Groundwork Construction Co. of San Francisco

We set the standard for custom & geometric windows in Half Moon Bay.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Half Moon Bay

Getting your custom & geometric windows project started is simple.

1

Call or Request a Free Estimate

Tell us about your custom & geometric windows project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local custom & geometric windows pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Half Moon Bay Customers Say

Trusted by homeowners across Half Moon Bay and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Custom & Geometric Windows in Half Moon Bay?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Half Moon Bay.

(866) 320-2646

Request a Free Estimate in Half Moon Bay

Tell us about your custom & geometric windows needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch