Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Door Installation Costs in San Francisco, and Why Your Frame Is the Real Variable
Door installation in San Francisco typically runs $650 to $2,400 for an interior door and $1,200 to $4,800 for an exterior door, and the number that moves most is not the slab. It’s the frame behind it. If your home went up before 1940, there’s a fair chance the rough opening hasn’t been square since Eisenhower was in office, and that one detail can double the labor line on a quote. Call (866) 320-2646 for a free estimate with a live person, any hour, any day.
Groundwork Construction Co. of San Francisco gives you the full picture up front, including frame correction as its own line item, so nothing shows up as a surprise mid-install.
Why Century-Old San Francisco Frames Throw Off Every Door Quote
The row houses packed into neighborhoods like the Mission, Noe Valley, and Potrero Hill were framed from old-growth timber that has spent a hundred-plus years doing what wood does: moving. Brick foundations settle unevenly. Hillside lots shift. What you get is a doorway that reads out-of-plumb and out-of-square before anyone touches it, even though it looks fine to the eye.
That matters because a pre-hung door is built to fit a square opening. Drop one into a racked frame and it binds at the top corner, drags across the threshold, or leaves a gap you can see daylight through. A contractor who doesn’t call out frame correction in writing is quietly planning to trim, shim, and force the fit, and you pay for it later in a door that never swings right.
Some of the tighter Victorian lots off the steep streets also mean tight staging, limited access, and structural work that draws a discretionary planning review. Our technicians have up to 12 years of experience reading exactly these conditions, and they’ll tell you what your frame needs before the first screw goes in.
Interior vs. Exterior Doors: Different Costs, Different Demands
Interior doors are simpler. The expense lives in frame correction and finish work. Exterior doors carry a second set of demands that are specific to the marine fog and salt air that roll across the west side of the city.
Standard weatherstripping and fasteners corrode fast out here. On fog-belt jobs, our crews spec stainless hardware and galvanized flashing because the salt eats ordinary steel within a fraction of its normal lifespan. Threshold seals have to handle both the damp that drives in with the fog and the drafts that whip through the city’s microclimates, where it can be socked in at Ocean Beach and sunny in the Castro on the same afternoon.
Brand choice matters here too. Therma-Tru and ViewLux entry systems hold up well against coastal moisture, and we’ll walk you through which door fits your exposure rather than pushing whatever’s on hand. For the broader picture on frames and glazing, see our Windows & Doors service.
The Four Cost Buckets Most Quotes Leave Out
We break every door estimate into the same four pieces, so you can compare bids apples to apples and spot the contractor hiding a cost. That’s the whole point of upfront pricing, no surprises.
| Line Item | Typical San Francisco Range |
|---|---|
| Pre-hung slab or door unit (interior) | $180-$650 |
| Pre-hung slab or door unit (exterior, insulated) | $400-$1,900 |
| Frame correction labor (squaring, shimming, sistering) | $250-$1,100 |
| Hardware (hinges, lockset, handleset, weatherstripping) | $75-$450 |
| Permit, when a structural opening is altered | $200-$700 |
Two things to note. First, frame correction is the bucket that swings most, and in pre-1940 stock it’s often the largest one. Second, if your job widens an opening or moves a load-bearing header, San Francisco’s Department of Building Inspection requires a permit, and we pull it. Skipping the permit saves money today and costs you at resale. A licensed and insured team pulls it every time.
What Accountability Looks Like When Surprises Surface Mid-Install
Rotted sill plates, hidden water damage, a header that isn’t where the plans said. On century-old San Francisco homes, these turn up. What matters is what happens next, and you can verify our answer before you sign anything.
- Live person, 24/7. Calls are answered by a real human around the clock. No voicemail black holes, no waiting for Monday.
- Background-checked, uniformed technicians. Not a crew in an unmarked van. Professional presentation and verified trustworthiness on every job.
- 730-Day Done Right Promise. If it’s not done right, we make it right. A door that swings or seals wrong after six months is still covered, and that matters in a climate where seasonal moisture keeps wood frames moving.
- Upfront pricing and financing. No-hassle quotes, 0% financing for 18 months, and $1,000 off projects over $10,000.
Our brand partnerships run across every trade, from KraftMaid and Cambria in kitchens to Andersen and GAF on windows and roofs, so doors aren’t a side offering dropped onto a list. They’re part of home work we do full scope, from foundation to finish line. For a wider view of what we handle across the city, see our San Francisco service area.
Common Local Scenarios We See
Most door jobs in San Francisco fall into a handful of patterns, and each carries its own cost logic.
- The bedroom door that won’t latch. Classic racked frame. You feel it as a door that drifts open or needs a shoulder to close. Frame correction plus a pre-hung slab usually lands in the low hundreds to around a thousand.
- The fog-belt entry door. Out in the Richmond or Sunset, salt eats standard hardware and paint in short order. Stainless fasteners and a well-sealed insulated unit cost more up front and far less over time.
- The widened passage. Opening up a wall between two rooms triggers a structural header, a permit, and drywall. Budget for frame correction and permit on top of the door.
- The aging hollow-core swap. Straightforward replacement when the frame is true. You get a solid-core upgrade and new hardware for a modest spend.
FAQs
Interior door installation in San Francisco typically runs $650 to $2,400 and exterior doors $1,200 to $4,800, depending mostly on frame condition and whether the opening is altered. Frame correction and permits are the two variables that push a quote toward the top of the range. Call (866) 320-2646 for an exact quote, and estimates are free.
Straightforward interior door swaps are often done in a single visit when the frame is true. Exterior doors and any job involving frame correction or a permit take longer, usually a scheduled multi-step install. Call (866) 320-2646 and we’ll tell you honestly what your job needs.
Repair wins when the frame is sound and the problem is a hinge, strike plate, or weatherstrip; replacement wins when the slab is warped, the frame is racked, or the door no longer seals. On pre-1940 San Francisco homes, the deciding factor is almost always the frame, not the door. Call (866) 320-2646 for a free walkthrough.
San Francisco’s Department of Building Inspection requires a permit when the job alters a structural opening, widens a passage, or changes a load-bearing header. A like-for-like door swap in an existing frame usually doesn’t need one. We pull permits when they’re required, so the work holds up at inspection and resale. Call (866) 320-2646 to find out which category your project falls in.
Ready to see your real number? Groundwork Construction Co. of San Francisco gives you transparent pricing, licensed and insured crews, and the 730-Day Done Right Promise built to last, backed in writing. Call (866) 320-2646 for a free estimate and design consult. Live person, 24/7.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan