Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Petaluma, CA: What It Costs and How Long It Takes
Door installation in Petaluma typically runs $450 to $1,800 per door for a standard interior or exterior replacement, and most single-door jobs wrap up in one day. Entry doors with new framing, sidelights, or a full jamb rebuild run higher, often $2,500 to $5,500 installed. Call (866) 320-2646 for a free on-site estimate with a written line-item price before any work starts.
How a Door Installation Actually Goes, Stage by Stage
Door work is unforgiving. A door that’s a quarter-inch out of square will stick every summer and whistle every winter, so the sequence matters more than the speed. Here’s how we run a Petaluma door installation from first walkthrough to final swing.
Stage 1 – The measure and the plan (day 1, about an hour). We measure the rough opening, check the wall for plumb and square, and look at what’s behind the trim. In older Petaluma homes, that inspection often turns up rot at the sill or a header that’s settled, and you’ll want to know about it before we order a door. This is when you decide the door style, material, and swing direction.
Stage 2 – Ordering and lead time (typically 1 to 3 weeks). Stock doors can be ready in days. A custom-sized entry door, a door with sidelights, or anything with a special finish runs longer. You’ll confirm the hardware, threshold, and finish now, because changing them after the door is built adds weeks.
Stage 3 – Demo and prep (a few hours). We pull the old door and frame, inspect the rough opening, and repair any framing, sheathing, or sill damage we find. This is the stage that separates a door that lasts from one that leaks. On a west-side Victorian, that prep can be the difference between a straightforward swap and a small framing repair.
Stage 4 – Setting and sealing (most of a day). The new door goes in, gets shimmed and squared, and is fastened through the jamb. We flash and seal the exterior, then check the swing, the latch, and the weatherstripping. Proper flashing is what keeps Petaluma’s wet winters out of your wall cavity. You’ll walk the door with us before we finish.
Stage 5 – Trim, hardware, and cleanup (a few hours). Casing goes on, the lockset and deadbolt get installed and keyed, and we clean up and haul the old door away. You decide the trim profile and hardware finish at this stage if you haven’t already. Most interior doors close out same-day; an exterior entry door with trim and finish work is usually a full day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Be Choosing Between
Most of the decisions on a Petaluma door installation come down to four things: material, configuration, hardware, and whether you’re keeping or rebuilding the frame. Here’s the honest trade-off on each.
- Fiberglass entry doors – The best all-around pick for Petaluma’s coastal-influenced climate. They won’t swell, rot, or warp with the wet winters, and they hold a finish well. They cost more than steel up front but need less upkeep over the long run.
- Steel entry doors – Solid, secure, and the lower-cost option. They dent, though, and any scratch that gets through the finish can rust in a damp valley. Good for a side or back door where looks matter less.
- Wood doors – The right call when a downtown Petaluma Victorian or Craftsman needs a door that matches the era. Beautiful and repairable, but they need paint and attention to survive the fog and rain. Wood is a maintenance commitment, not a one-time purchase.
- Interior doors (hollow-core vs. solid-core) – Hollow-core is lighter and cheaper, fine for closets and low-traffic rooms. Solid-core costs more but cuts sound between rooms and feels substantial. For bedrooms and bathrooms, solid-core is usually worth it.
- Configuration and glazing – A single slab is the simplest job. Adding sidelights, a transom, or a multi-panel setup raises both the door cost and the framing work. Glass choice matters too: tempered or laminated glass where code requires it, and low-E glazing if the door faces the afternoon sun.
- Hardware and finish – A basic lockset is cheap; a keyed entry handle set with a matching deadbolt adds cost but is what you want on an exterior door. Finish choice (satin nickel, oil-rubbed bronze, matte black) is cosmetic but drives the price of the hardware package.
If the door is part of a bigger exterior refresh, homeowners often pair this with Windows & Doors in Petaluma so the trim and finish match across the whole facade.
What Door Installation Costs in Petaluma, CA
Most Petaluma door installations land between $450 and $1,800 per door for a standard replacement, with custom entry systems running $2,500 to $5,500 or more. The range is wide because a door swap and a door-and-frame rebuild are genuinely different jobs. Here’s what moves the number:
- Door type and material – A hollow-core interior door is the low end; a fiberglass or wood entry door with glazing is the high end.
- Existing condition – A sound, square opening is quick. Rot, a settled header, or a jamb that needs rebuilding adds labor and materials.
- Configuration – Single slab versus sidelights, transoms, or a multi-panel setup. Each added element is more framing, more glass, more cost.
- Hardware and finish – A basic lockset versus a keyed entry set with deadbolt and a premium finish package.
- Permit scope – A like-for-like replacement usually doesn’t require a permit. Enlarging an opening, adding a new exterior door, or changing the structure does, and that adds inspection and review time.
A written estimate from us lists the door, the hardware, the framing and prep labor, the flashing and sealing, trim, and disposal as separate line items, so you can see exactly what you’re paying for. Things that typically aren’t included: structural repair discovered after demo, custom finish work, and any design-review fees a historic property might trigger. We flag those before the job, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Petaluma Homes Do to This Job
Petaluma’s housing stock splits sharply, and that split changes door work more than most homeowners expect. Downtown and the west side hold Victorian, Craftsman, and early-1900s wood-frame homes, many on raised foundations near the Petaluma River, where the original door openings are rarely square and the sills have had a century of wet winters to rot. Out east, off McDowell and East Washington, the 1970s-to-2000s stucco tract homes have plumb openings but often need a door that matches a more recent facade. And the historic downtown is subject to design review, so an exterior door change on a protected Victorian can require city review that a same-day swap elsewhere would never see. That’s the reality we build schedules around here.
The good news: because we work across both the historic core and the newer east-side subdivisions, we know when a door is a straightforward replacement and when it’s a small framing job with preservation sensitivity attached. We cover the full Petaluma area, including ZIP codes 94952, 94953, 94955, and 94975, and we pull the permits and pass the inspections when the scope calls for it.
Serving Petaluma, CA – Our Local Coverage Area
We serve Petaluma and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Door Installation in Petaluma
A standard interior or exterior door replacement is usually a one-day job, and an entry door with trim and hardware is typically a full day. Add one to three weeks for ordering if the door is custom or needs a special finish. Call (866) 320-2646 for a realistic timeline on your specific door.
A like-for-like replacement in the same opening usually doesn’t require a permit, but enlarging an opening, adding a new exterior door, or changing the structure does. Historic downtown properties may also trigger design review. We confirm the permit scope up front and pull and pass inspections when they’re needed. Call (866) 320-2646 to talk through your project.
In most cases, yes. A same-size replacement leaves the plumbing and structure alone. The exception is when the new door is a different size or configuration, which means framing changes. We measure the opening first and tell you which case you’re in before you commit. Call (866) 320-2646 for a free on-site measure.
Standard door replacement runs $450 to $1,800 per door, and custom entry systems run $2,500 to $5,500 or more. The final number depends on material, configuration, existing condition, hardware, and permit scope. Call (866) 320-2646 for a free written line-item estimate – the number you see is the number you pay.
Every door we install is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If the door isn’t hung right, we make it right. Call (866) 320-2646 to schedule your free estimate.
Get a Free Door Installation Estimate in Petaluma
If you’re ready to put a door in that actually closes square and keeps the weather out, call (866) 320-2646 to schedule a free on-site estimate for your door installation in Petaluma. A live person answers around the clock, so you won’t land in voicemail. We’ll measure the opening, walk the options with you, and hand you a written line-item price with no surprises. Homeowners often pair this with Chain Link Fence in Petaluma or a Vinyl Fence in Petaluma while the crew is on site – and if the wider project grows into full Windows & Doors work, we scope that too.
Written by the team at Groundwork Construction Co.