Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across San Bruno
If your driveway is ponding after every foggy week, or the pavers along the garage apron have started to sink, you’re seeing the same thing we see on a lot of San Bruno blocks. We bring our Driveway & Pavers team out to San Bruno to look at the base, the grade, and the drainage before anyone quotes a surface. Call (866) 320-2646 and a live person answers, any hour, any day. We know this stretch of the Peninsula, from the Crestmoor streets to the flats near San Bruno Avenue, and we plan every job around what’s actually under the slab.
Why Groundwork Construction Co. of San Francisco Is San Bruno’s Preferred Driveway & Pavers Company
San Bruno homeowners have been burned by surface-only work: a fresh coat of sealer over a base that was never repaired, a low bid that grew once the crew broke ground. We quote the whole scope upfront so the number you see is the number you pay, and every job carries our 730-Day Done Right Promise. If something we installed fails inside that window, we make it right.
Our technicians have up to 12 years of experience with pavers, concrete, and asphalt, and they arrive background-checked and in uniform. We understand the permit and inspection rhythm in San Bruno’s 94066 zip, and we build it into the schedule instead of discovering it mid-job. When you call, you reach a live person 24/7, not a voicemail box that waits until Monday.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Driveway & Pavers Services in San Bruno
Paver Driveways
Pavers suit San Bruno’s fog-belt climate well because individual units can be lifted and reset when the marine layer works moisture under an edge. We set them on a properly compacted, graded base so joint sand stays put and the surface drains away from the garage. Belgard pavers hold up to the constant wet-dry cycling this side of the Peninsula throws at them.

Concrete Driveways & Concrete Work
A poured concrete driveway in San Bruno runs $4,500 – $12,000 depending on square footage, thickness, and how much of the old slab has to come out. We cut control joints and set slope so water moves off the surface instead of pooling at the apron. For lots where the subgrade is soft from years of fog-belt moisture, we re-compact and re-grade before we pour.

Asphalt Driveways & Resurfacing
Asphalt paving in San Bruno typically lands between $3,500 and $9,000 for a standard residential driveway. Resurfacing can be the right call when the base is still sound and the wear is only at the surface. When the cracking runs all the way through, a patch-over just buys you a season.

Driveway Repair & Replacement
Full replacement in San Bruno runs $5,000 – $14,000. We inspect first, because on post-WWII lots the visible crack is often a symptom of a slab poured over an undersized, poorly drained base. Cutting out the failed section, hauling it, and re-compacting the base costs more than a cosmetic fix, and it’s the only thing that holds.
Trusted Brands We Service in San Bruno
We work with a curated set of brand partners so the materials under your driveway are the ones we’d put on our own homes. Belgard for pavers, GAF and CertainTeed for adjoining roofing and flashing details where the driveway meets the garage. We don’t stock parts or materials locally; we order to the job and schedule delivery so nothing sits on your street for weeks. That keeps turnaround tight and lets us hold our pricing. Every install is backed in writing for 730 days.
See the difference
Before
After
Before
After
Before
AfterCommon Driveway & Pavers Problems We See in San Bruno Homes
Here’s what actually drives driveway work in San Bruno, and why surface appearance is a poor guide:
- Ponding and settled pavers at the garage apron. On Crestmoor homes rebuilt after 2010, the new slab often sits right next to an untouched 1940s lot, so the grades don’t match and water pools at the seam. Ponding there is a base and drainage problem, not a paver problem.
- Moisture wicking under the edge, year-round. The marine layer keeps the ground damp for long stretches, softening the base and washing out joint sand until pavers shift. Sealing helps, but only after the edge drain and base are correct.
- Cracking that spreads from an old foundation or chimney. Movement in an unbolted foundation or a chimney base telegraphs straight into the adjoining slab. On those lots the fix is structural before any resurfacing makes sense.
- Alligator cracking over a thin, aged slab. Many San Bruno driveways were poured decades ago over minimal base, and the pattern cracking you see is the slab failing from underneath rather than at the top.
Because Crestmoor and the surrounding blocks were rebuilt or retrofitted after the 2010 PG&E pipeline explosion, a driveway contractor in 94066 can be digging next to a foundation that’s a dozen years old on one lot and a 1940s slab on the next. That’s also why any excavation near the old blast zone may have to clear PG&E gas line protocols before a shovel goes in. It shapes how we schedule, how we sequence the cut, and how we price the base work.
A typical job on San Bruno’s post-WWII lots looks sound at the surface and turns out to sit over a cracked, undersized slab poured decades ago. The failure shows up as ponding, alligator cracking, and pavers sinking at the apron where water runs downhill. The cause is usually poor subgrade drainage combined with the fog belt’s constant moisture cycling, which works the soil under the slab. A qualified local pro pulls the permits, cuts out and hauls the failed section, re-compacts and re-grades the base, sets proper slope away from the garage, and holds the finished surface for inspection sign-off before the punch list closes.
Pricing for Driveway & Pavers in San Bruno, CA
Here are the ranges we work with in San Bruno, so you can budget before anyone comes out. What moves the number is base condition, access, and how much has to come out. Old slabs, soft subgrade from years of marine-layer moisture, and PG&E clearance near the Crestmoor zone all affect final cost, and we quote them upfront rather than discovering them mid-job. The estimate and design consult are free.
| Service | San Bruno Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Sealing | $250 – $700 |
Projects over $10,000 get $1,000 off, and we offer 0% financing for 18 months so a full replacement doesn’t have to come out of savings in one shot. Call (866) 320-2646 for a free estimate with line-item pricing in writing.
We Also Serve Cities Near San Bruno
We take on driveway and paver work in San Bruno and the surrounding Peninsula cities. That includes Pacifica, Daly City, San Francisco, and Half Moon Bay. Same standard everywhere: inspection first, base work priced in writing, and the 730-Day Done Right Promise on the finished surface. Call (866) 320-2646 to schedule an estimate in any of these areas.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Driveway & Pavers in San Bruno
Yes, most full driveway replacements in San Bruno’s 94066 require a permit, and any project that changes grade toward the street or touches the public apron definitely does. We pull the permit and manage the inspection so it’s on us, not you. Call (866) 320-2646 and we’ll walk through what your specific lot needs.
It’s usually the base, not the surface. The fog belt keeps the ground damp most of the year, and poor subgrade drainage lets moisture work the soil under the slab until it shifts and cracks. On post-WWII lots, thin original slabs make it worse. Call (866) 320-2646 for an inspection that tells you whether it’s a base fix or a full replacement.
Yes, but any excavation near the old Crestmoor blast zone may require PG&E gas line clearance before work starts, and we plan for that. We don’t skip the protocol to save a day. Call (866) 320-2646 and we’ll confirm what your address needs before we schedule.
They’re priced and approved in writing before we touch anything. The failure underneath a sound-looking surface is the single biggest reason a driveway quote moves, so we inspect first and write allowances into the contract. Nothing gets added to your bill without your sign-off. Call (866) 320-2646 for a line-item estimate.
Pavers handle San Bruno’s fog-belt moisture better because a damaged unit can be lifted and reset without replacing the whole surface, while concrete is usually cheaper upfront and needs joint maintenance. Paver installation runs $7,000 – $18,000 here; concrete runs $4,500 – $12,000. Call (866) 320-2646 and we’ll recommend based on your lot, not a sales script.
Whether you’re replacing a cracked slab in Crestmoor, resetting sinking pavers near the garage apron, or putting in a paver patio, the free estimate and design consult is where we start. We’ll inspect the base, quote line items in writing, and tell you honestly what your San Bruno lot actually needs. Call (866) 320-2646 and a live person will pick up, day or night.
Written by the team at Groundwork Construction Co. of San Francisco.