Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterEnergy Efficient Window Costs in San Francisco: What You’ll Actually Pay
Energy-efficient windows in San Francisco run about $700 to $1,800 per window installed, well above the $400 to $1,000 national guides quote. The gap isn’t markup. It’s permits, non-standard Victorian openings, and coastal hardware. For a line-item quote before you sign anything, call Groundwork Construction Co. of San Francisco at (866) 320-2646. Our technicians have up to 12 years of experience, and estimates are free.
San Francisco is one of the densest, most historic urban cores in the country, and its housing shows it: 1880s-to-1920s Victorian and Edwardian row houses with brick foundations, stucco-over-wood buildings from the 1950s through the 1970s, and modern towers downtown. Add fog, damp, and salt air off the Pacific and the Bay, and a window here has to do more than hold glass. That reality shapes every number below.
Key takeaways
- Budget $700-$1,800 per window installed, not the $400-$1,000 you’ll see on national sites.
- The three local cost layers: San Francisco Department of Building Inspection permit fees, potential Historic Preservation review, and marine-grade hardware.
- Custom-sized Andersen or Marvin units often cost less overall than stock units that need $300-$600 per window in filler-and-reframe labor.
- The 730-Day Done Right Promise means a seal failure in year one gets fixed at no charge.
Why energy-efficient windows cost more in San Francisco: the line-by-line breakdown
Three local variables inflate the price, and national pricing guides account for none of them.
- The permit fee. Window replacement in San Francisco requires a permit through the Department of Building Inspection. The fee scales with the number of openings and valuation, so a full-house job carries a real line item that small installations often skip.
- Historic Preservation review. If the home sits in a surveyed historic district, exterior changes can trigger design review before a permit issues. That adds time and, sometimes, a design professional’s fee. We flag this at estimate, not after the deposit.
- Marine-exposure hardware. Contractors who work the west side of the city spec stainless fasteners and galvanized flashing even on small jobs, because fog-belt moisture and ocean salt corrode standard hardware and paint far faster than inland conditions do. It’s a line item, and it’s there for a reason.
Then comes the opening itself. A pre-1960 San Francisco home rarely has a standard, catalog rough opening. Victorian balloon-frame walls were built to the inch, not to a manufacturer’s spec sheet. A stock box-store unit can be forced to fit, but only with filler strips and reframing that run $300 to $600 per window in labor. Custom-sized Andersen or Marvin units cost more upfront and eliminate that labor entirely. On a 10-window job, the math often lands in the same place, with a better seal and a cleaner install.
Our Windows & Doors work is built around that tradeoff. We measure the actual opening, then quote the unit that fits it.
What should you look for in an energy-efficient window quote?
You want a full line-item breakdown before you sign, not a “starting at” number that balloons once the crew opens a wall. Here’s what a fair San Francisco quote shows you:
- Unit brand and model named. Vague references to “energy-efficient glass” mean nothing. Andersen and Marvin both publish performance data you can check.
- Rough-opening carpentry as its own line. If it’s buried in “miscellaneous,” expect a change order.
- Permit and review fees stated separately. These don’t disappear because a bidder ignored them.
- Hardware spec. Stainless or galvanized fasteners and flashing should be written in, not assumed.
- The warranty in writing. Ask what happens if a seal fails in year one. Then read the answer.
Energy-efficient window cost table for San Francisco
These are the installed ranges we quote across San Francisco. Your exact number depends on opening size, material, and whether your home sits in a historic district.
| Item | Cost range |
|---|---|
| Energy-efficient window replacement (per window, installed) | $700-$1,800 |
| Full window replacement project (typical home) | $5,310-$17,700 |
| Impact window installation (full project) | $9,440-$29,500 |
| Custom-sized unit, rough-opening carpentry included | Quoted per opening |
| Stock unit, filler-and-reframe labor (per window) | $300-$600 |
Prices reflect what we actually charge, not a promotional teaser. Projects over $10,000 take $1,000 off, and 0% financing for 18 months is available.
How does financing change the math on a full-house replacement?
Financing turns a 10-window Victorian job into something you can plan around instead of piecemeal. Here’s the comparison that matters for a homeowner:
- Three windows at a time, year after year. Each pass carries its own minimum charge, its own permit, and its own scheduling overhead. You pay the fixed costs repeatedly.
- All 10 windows in one project. One permit, one mobilization, one carpentry scope. The $1,000 discount applies. And 18 months at 0% spreads the balance without interest piling on.
- The draft problem actually goes away. Replacing windows in stages leaves the failing ones in place through another fog season, and the moisture damage keeps working.
It’s not a cheaper window either way. It’s a cheaper project, because you stop paying the startup cost over and over.
What is the 730-Day Done Right Promise worth on a window project?
It’s worth the cost of a failed window, which is the price of the window plus the labor to reinstall it, usually a second time you didn’t budget for. A window that fails its seal in year one gets fixed at no charge under our 730-Day Done Right Promise. That’s two full years of coverage on the installation, in writing.
Compare that against a low-bid installer who’s unreachable after project closeout. On a $12,000 job, one seal failure on a large fixed unit means paying again for the unit, the labor, and the finish work around it. The warranty is the difference between a one-time cost and an open-ended one. We pair it with background-checked, uniformed technicians and live phone coverage around the clock, so the person who answers your call during the project is the same one who handles the callback.
For a wider view of how window and door work fits into a renovation, see our home page, and browse what we cover across the San Francisco service area.
FAQs
Expect $700-$1,800 per window installed, or $5,310-$17,700 for a full replacement project. The premium over national averages comes from permits, historic review where it applies, and marine-grade hardware. Call (866) 320-2646 for an exact quote, and the estimate is free.
Yes, though the payoff here is more about moisture and comfort than heating bills. Double-pane units with a properly sealed frame keep fog-belt damp from sneaking into wall cavities, which is where the expensive damage starts. The mild climate means heat loss isn’t the main event. Corrosion and rot are. A good window slows both.
Yes, replacement windows require a permit from the Department of Building Inspection, and homes in a surveyed historic district may face design review on top of it. We handle the permit scope and tell you upfront whether review is likely, so the fee shows on your quote instead of surprising you later. Call (866) 320-2646 to find out what your address needs.
Yes, and on pre-1960 San Francisco housing it’s usually the right call. Custom Andersen or Marvin units match the actual rough opening and skip the filler-and-reframe labor that stock units require. The price difference evens out, and the fit is better. We measure every opening before quoting.
Planning a window project? Call (866) 320-2646 for a free project estimate and design consult. Upfront pricing, no surprises, live person on the line around the clock. Mention a full-house job over $10,000 and ask about the $1,000 discount and 0% financing for 18 months. We put the number in writing before you commit.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan