Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Energy-Efficient Windows in Daly City, CA: What the Job Involves and What It Costs
Energy-Efficient Windows in Daly City, CA typically run $4,500 – $15,000 for a whole-home replacement, with impact-rated units climbing to $8,000 – $25,000 when wind-borne debris protection is part of the spec. A standard six-to-eight window swap takes one to three days on site. Most Daly City homes we walk through are still carrying original single-pane glass from the 1950s, and on this fog belt that means condensation, drafty frames, and heat leaking out all winter. Call (866) 320-2646 for a free on-site estimate.
How We Run an Energy-Efficient Window Job, Start to Finish
Every house is different, but the sequence below is the one we follow on the steep, tight lots that dominate Daly City. Here’s what actually happens and what you decide at each stage.
Stage 1: Assessment and measurement (about 2 hours)
We walk every opening, check the existing frames for rot and stucco failure, and measure the rough openings. On hillside homes we pay close attention to how the original frames were set, since fog-driven moisture often hides soft spots behind trim. You decide nothing yet, but you get a clear picture of which windows can be swapped cleanly and which need carpentry.
Stage 2: Product selection and written quote (1 to 2 weeks)
You’ll choose the glass package, frame material, and configuration from options like ECO Window Systems or Andersen. We hand you a line-item written quote: no-hassle upfront pricing, the number you see is the number you pay. This is the stage where lead times get set, often four to six weeks for custom sizes.
Stage 3: Permits and prep (1 to 3 weeks)
Window replacement that changes the opening or alters egress needs a permit through the local building department. We pull it and schedule the inspection. The day before install, we drop cloths, remove screens and blinds, and protect the interior flooring so there’s no surprise about mess.
Stage 4: Removal and installation (1 to 3 days)
Old units come out, the rough opening is squared and shimmed, and any rot behind the frame gets repaired before the new window goes in. Most standard-sized windows are set in a single day. We flash and seal each opening, then tape and caulk the exterior so wind-driven rain has nowhere to get behind the stucco.
Stage 5: Trim, inspection, and walkthrough (same day as completion)
Interior trim goes back on, and we run the inspection if the permit requires it. You get a final walkthrough where you open and close every operable unit and check the seals yourself. The whole job is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Window Options You’ll Choose Between
Most of the decisions on this job come down to a handful of trade-offs. Here’s the honest version of each.
- Vinyl frames: The most budget-friendly choice at the low end of the $4,500 – $15,000 range. Good thermal performance, low maintenance, but they can look plasticky on a period stucco home and don’t always take a dark finish well.
- Fiberglass frames: More stable than vinyl in temperature swings and holds paint and stain better. Costs a bit more but suits the 1940s – 1960s housing stock on this fog belt.
- Aluminum-clad wood: Premium look, strong durability outside. Higher cost and heavier, so it fits a homeowner who cares about matching original trim.
- Glass packages: Low-E coatings and argon fill cut heat loss and reduce condensation, which matters on the coast. A slightly higher U-factor is worth the money here.
- Impact-rated or wind-rated units: If you want debris protection and a stronger frame, ECO Window Systems and ViewLux both offer units engineered for this. Pushes toward the $8,000 – $25,000 top end.
- Therma-Tru entry-door systems: If the whole envelope is being tightened, pairing windows with a new entry door closes gaps the glass alone can’t fix, and homeowners often pair this with Iron Fence in Daly City when they’re already improving the front of the house.
What Energy-Efficient Windows Costs in Daly City, CA
Here’s the short answer: whole-home replacement runs $4,500 – $15,000 for energy-efficient windows in Daly City, and wind- or impact-rated installations run $8,000 – $25,000. A single-window replacement sits nearer the bottom, while a full house with premium frames and hardened glass hits the top.
Five things move the number:
- Window count and size: More openings and larger glass mean more material and labor.
- Existing frame condition: Rot repair behind the stucco, common on these hillsides, adds carpentry before anything new goes in.
- Frame and glass grade: Vinyl versus fiberglass or aluminum-clad wood, plus low-E or impact glass, is a real jump.
- Access: Tight lots where a neighbor’s wall is feet away slow the crew and can require more careful staging.
- Permit scope: A simple like-for-like swap is cheaper to permit than one that changes openings or egress.
Your written estimate covers material, labor, removal, disposal, flashing, and standard trim. It typically doesn’t cover hidden rot found after demo, structural repairs, or painting.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to This Job
Daly City’s dense rows of post-war stucco-over-wood-frame homes sit on steep, fog-soaked slopes, and that shapes the work here. The persistent fog and wind-driven rain beat up exterior seals faster than inland, so flashing and caulk on every window has to be done right the first time. On the steep streets off Mission and Westlake, we routinely find original frames that have quietly rotted from years of moisture, hidden behind trim. Those rebuilds sometimes push a job past a simple swap, and they have to be handled before inspection will pass. Original single-pane glass in these 1940s – 1960s homes is the main reason energy bills run high and rooms stay clammy. If the scope grows into the whole exterior, it’s part of a full Windows & Doors in Daly City project. We cover all of Daly City, from the 94015 flats to the hillside blocks in 94014.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Energy-Efficient Windows in Daly City
Most homes take one to three days on site once the units arrive, with four to six weeks of lead time before that. Custom sizes and impact-rated glass add to the wait. Call (866) 320-2646 to get a timeline on your estimate.
If the work is like-for-like and keeps the same opening, many replacements don’t need a permit, but any change to opening size or egress does. We check the requirement for your specific address and pull the permit when needed. Call us to confirm your scope.
Yes. A standard replacement keeps the same rough opening, so no plumbing or structural work is involved. Rot repair or a resized opening is the exception, and we’ll flag it in the estimate before we start.
Whole-home replacement runs $4,500 – $15,000, and impact-rated installs run $8,000 – $25,000. Your exact number depends on window count, frame grade, and condition. Call (866) 320-2646 for an exact quote, and estimates are free.
Every installation is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. That’s on top of the manufacturer’s warranty on the units themselves. Ask about it on your estimate call.
Get a Free Estimate on Energy-Efficient Windows in Daly City
If you’re ready to price energy-efficient windows for your Daly City home, call (866) 320-2646. We’ll schedule a free on-site estimate, measure every opening, and hand you a written line-item quote with no-hassle upfront pricing. A live person answers around the clock, and estimates are free. Ask about 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.